| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
tromboads
 Registrado: 29 Mayo 2012 Mensajes: 1695 Ubicación: Melbourne AU
Expire: 2015-10-01
|
|
| Volver arriba |
|
 |
Lightshow
 Registrado: 04 Nov 2011 Mensajes: 3666 Ubicación: Calgary
|
 Publicado: Sáb Jun 16, 2012 12:08 pm Asunto: |
|
 Publicado: Sáb Jun 16, 2012 12:08 pm Asunto: |
|
|
Lightshow wrote:
I have a lens that looks similar, the aperture cup(with the slots) is held in by a ring, which in turn is held in by a grub screw(s).
Loosen the grub screw(s), the aperture cup is turned by a screw with a long head which slots into the aperture ring, so I think the aperture ring is the next thing to remove. _________________ A Manual Focus Junky...
One photographers junk lens is an artists favorite tool.
My lens list
http://www.flickr.com/photos/lightshow-photography/ |
|
| Volver arriba |
|
 |
tromboads
 Registrado: 29 Mayo 2012 Mensajes: 1695 Ubicación: Melbourne AU
Expire: 2015-10-01
|
 Publicado: Sáb Jun 16, 2012 1:17 pm Asunto: |
|
 Publicado: Sáb Jun 16, 2012 1:17 pm Asunto: |
|
|
tromboads wrote:
hmmm curious.
there are no screw heads exposed in my example so I feel kinda stuck. I nearly feel as if there is another "name plate" type body thread which needs to be removed. I can poke and prove the apature housing, and could probably force it out but that still leaves the control unit attached.
sorry when I say control unit I mean the circular aperture selector and the rail it must move on, which ultimately is what I'm trying to get at.  |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Sáb Jun 16, 2012 3:31 pm Asunto: |
|
 Publicado: Sáb Jun 16, 2012 3:31 pm Asunto: |
|
|
martinsmith99 wrote:
I really wonder if it's worth the trouble for a fairly slow, average lens. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
tromboads
 Registrado: 29 Mayo 2012 Mensajes: 1695 Ubicación: Melbourne AU
Expire: 2015-10-01
|
 Publicado: Dom Jun 17, 2012 12:01 am Asunto: |
|
 Publicado: Dom Jun 17, 2012 12:01 am Asunto: |
|
|
tromboads wrote:
Oh its only trouble because I don't know what I'm doing :p I feel too close to want to waste it now.
And if some one has been where I've been, it wont be trouble for much longer ;p
As for its worth, yes I don't imagine this to be a magical key, it does seems a shame to waste an otherwise functional lens that, through no fault of its own just had all its lube dried out  |
|
| Volver arriba |
|
 |
Gummiebear
Registrado: 03 Ene 2008 Mensajes: 4 Ubicación: Toronto, Canada
|
 Publicado: Dom Jun 17, 2012 11:08 pm Asunto: |
|
 Publicado: Dom Jun 17, 2012 11:08 pm Asunto: |
|
|
Gummiebear wrote:
| martinsmith99 escribió: |
| I really wonder if it's worth the trouble for a fairly slow, average lens. |
I have to partly disagree with you. Yes it's somewhat slow, but all Tessar are f2.8 or slower. It's by design. I find it optically very good lens with delicious bokeh. I would say it's better than average. I enjoy shooting with it very much:
http://oldlenses.blogspot.ca/2012/03/carl-zeiss-jena-tessar-50mm-f28-sample.html
http://oldlenses.blogspot.com.au/2012/05/carl-zeiss-jena-tessar-50mm-f28-another.html
http://oldlenses.blogspot.ca/2012/05/photoessay-with-carl-zeiss-jena-tessar.html |
|
| Volver arriba |
|
 |
tromboads
 Registrado: 29 Mayo 2012 Mensajes: 1695 Ubicación: Melbourne AU
Expire: 2015-10-01
|
 Publicado: Dom Jun 17, 2012 11:45 pm Asunto: |
|
 Publicado: Dom Jun 17, 2012 11:45 pm Asunto: |
|
|
tromboads wrote:
| Lightshow escribió: |
I have a lens that looks similar, the aperture cup(with the slots) is held in by a ring, which in turn is held in by a grub screw(s).
Loosen the grub screw(s), the aperture cup is turned by a screw with a long head which slots into the aperture ring, so I think the aperture ring is the next thing to remove. |
Turning the lens face down i can see what apears to be the grub screw that holds the internal aperture ring down against the rear element. I cant access it tho (thread points 90 degrees out of the body) along the rail for it to move, because of the pre-set selector being in the road. I must have to remove that first, but again I'm at an end of my understanding  |
|
| Volver arriba |
|
 |
tromboads
 Registrado: 29 Mayo 2012 Mensajes: 1695 Ubicación: Melbourne AU
Expire: 2015-10-01
|
 Publicado: Jue Jun 21, 2012 1:52 pm Asunto: |
|
 Publicado: Jue Jun 21, 2012 1:52 pm Asunto: |
|
|
tromboads wrote:
i hope too to! providing i can get it opened
#UPDATE.
So i left it in a tub of kero overnight, next morning still nothing. left it another night Smooooooooooooth as can be. Still. the blades now have come loose and are wondering over the rear element. Ironic that now its in a workable position I'm still stuck needing to get under them still to put them back together.
Next time someone tries this, use some tape to hold the ring down, leave it in kero over night then put it back together and shoot with the dam thing.
"sigh" |
|
| Volver arriba |
|
 |
tromboads
 Registrado: 29 Mayo 2012 Mensajes: 1695 Ubicación: Melbourne AU
Expire: 2015-10-01
|
 Publicado: Mié Jun 27, 2012 6:07 am Asunto: |
|
 Publicado: Mié Jun 27, 2012 6:07 am Asunto: |
|
|
tromboads wrote:
So no one can remember how to remove the aperture selector so I can get at the aperture ring?
This lens thus far literally survived the cold war and a depression or 3 It would seem be a shame for its death to be due to simple ignorance.  |
|
| Volver arriba |
|
 |
twinquartz
 Registrado: 11 Jun 2012 Mensajes: 316 Ubicación: Sweden
Expire: 2013-10-29
|
 Publicado: Jue Oct 11, 2012 3:57 pm Asunto: |
|
 Publicado: Jue Oct 11, 2012 3:57 pm Asunto: |
|
|
twinquartz wrote:
| Cita: |
| So no one can remember how to remove the aperture selector |
Did you ever find you how to remove it? |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|