MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Luxmeter as Lightmeter
Ver tema anterior :: Ver tema siguiente  


Reply

I found a cheap luxmeter (~18€) and was curious how precise it might work as photographic lightmeter.
The luxmeter gives you only Lux as measurement unit, so you need a formula for to get ISO/aperture/shutter speed values.

The formula is
[Lux] = 250/[ISO] * [aperture]^2/[time]

Since I'm not good enough in mental arithmetic, I made a little table as mnemonic for my mostly used ISOs and fixed it with tesa on the front first.
(made at ISO 3200, F2.8, 1/60s; NEX said the same as the chart Smile)
After that I made and fixed a full chart on the back of the device:


EDIT: How to use:

For exampe if you have ISO 400 film, you'r aperture was set to F5.6 und your luxmeter shows a value around 8000 lux - than your correct speed is 1/500s
Of course you could also do it the other way round.
If anyone has an idea for an more clearly arranged chart, please share it! Wink

I've tested it on NEX in M-Mode and afterwards on film.
The results are amazingly precise! - far more precise than very most cheap lightmeters and it can easily compete against the build-in NEX lightmeter.
Only drawback is - of course - that you have to look on the table first to find your exposure times - which makes it a little slower than a professional lightmeter - and you can't do spot measuring.
But if your lightmeter doesn't have a calotte for ambient light and you need one for hard conditions were spot or analog TTL often producing bullshit (sun+snow, sun+beach, dark stuff, low key,...) it's an really cheap and good alternative to an professional lightmeter.


Editado por última vez por ForenSeil el Sáb Oct 20, 2012 5:16 am; editado 12 veces en total


Reply

Excellent thank you for sharing it!


Reply

Very, very useful, thanks.


Reply

Thanks a lot. I will definitely try that. I also have one of those luxmeters at home.


Reply

How do you read this table?
i have a masters degree but still can't figure it out Smile


Reply

std escribió:
How do you read this table?
i have a masters degree but still can't figure it out Smile


For exampe if you have ISO 400 film, you'r aperture was set to F5.6 und your luxmeter shows a value around 8000 lux - than your correct speed is 1/500s for example

Of course you could also do it the other way round.

If has an idea for an more clearly arranged chart, please share it! Wink


Editado por última vez por ForenSeil el Mar Oct 09, 2012 1:45 pm; editado 3 veces en total


Reply

Nice Smile
It's a good puzzle.


Reply

std escribió:
Nice Smile
It's a good puzzle.


Don't ashamed Stefan I also couldn't figure out Laughing thank you for explanation.