MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Aperture re-lube Industar 50-2?
Ver tema anterior :: Ver tema siguiente  


Reply

Hi all!
Have just managed to re-lube the focus helical
of a cute little Industar 50-2, using a damping grease.
Worked perfectly.

But: now the aperture ring is too stiff.
Can anyone please point to a step-by-step aperture
lubrification guide?


Reply

Aperture requires no lubrication. If aperture ring is too stiff - here needed some cleaning.
Unscrew two small(very small) screws on the back, then unscrew rounded nut. Lens block comes out.

(black holes on photo - from small screws, it drilled in the rounded nut)


Unscrew small screw on the side of lens block(it connects ring with aperture), then unscrew aperture ring. Clean the tread and rub it with the graphite pencil.



Reply

Thank you very much! Spasibo!