| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
bychance
 Registrado: 24 Abr 2013 Mensajes: 348 Ubicación: Kent, England
|
 Publicado: Jue Mar 27, 2014 5:53 pm Asunto: Set of JIS screw drivers |
|
 Publicado: Jue Mar 27, 2014 5:53 pm Asunto: Set of JIS screw drivers |
|
|
bychance wrote:
Can anyone recommend a decent set of these please. General lens and camera repair sizes, but in particular Canon AE1 and A1. Also is there a preferred spanner wrench for lens repairs that you would recommend.
Thanks
Steve. _________________ I got where I am by avoiding where I was going.
Now where was I? |
|
| Volver arriba |
|
 |
SXR_Mark
 Registrado: 12 Jun 2010 Mensajes: 506 Ubicación: England
|
 Publicado: Jue Mar 27, 2014 10:25 pm Asunto: |
|
 Publicado: Jue Mar 27, 2014 10:25 pm Asunto: |
|
|
SXR_Mark wrote:
I have never seen screwdrivers specifically for JIS screws. (They must exist, but probably only in Japan). I get by with good quality Philips drivers from Facom. They are not a perfect fit, so you have to be careful. A good handle on the driver is essential so you push firmly into the screw to stop the driver camming out. Make sure the head of the screw is clean and lubricate the screw thread with a drop of isopropyl alcohol if it is stubborn.
This lens wrench is pretty decent and good value Haz clic aquí para verlo en eBay
Mark _________________ Olympus OM-D E-M1 for everything |
|
| Volver arriba |
|
 |
konicamera
 Registrado: 03 Mayo 2009 Mensajes: 750 Ubicación: Warsaw, Poland
Expire: 2014-06-14
|
 Publicado: Vie Mar 28, 2014 12:50 am Asunto: Re: Set of JIS screw drivers |
|
 Publicado: Vie Mar 28, 2014 12:50 am Asunto: Re: Set of JIS screw drivers |
|
|
konicamera wrote:
| bychance escribió: |
Can anyone recommend a decent set of these please. General lens and camera repair sizes, but in particular Canon AE1 and A1. Also is there a preferred spanner wrench for lens repairs that you would recommend.
Thanks
Steve. |
Probably the best source of JIS screwdrivers outside of Japan is Micro-Tools. It's a US outfit, but they now have a European site (in English and German), thanks to which one can save on shipping costs and customs fees, as the tools aren't cheap: http://www.micro-tools.com _________________
L'homme s'ennuie du bien, cherche le mieux, trouve le mal, et s'y soummet, crainte du pire. - Duc François-Gaston de Lévis
While it is nice to be important, it's more important to be nice.
URL: www.konicafiles.com
|
|
| Volver arriba |
|
 |
bychance
 Registrado: 24 Abr 2013 Mensajes: 348 Ubicación: Kent, England
|
 Publicado: Vie Mar 28, 2014 12:53 am Asunto: |
|
 Publicado: Vie Mar 28, 2014 12:53 am Asunto: |
|
|
bychance wrote:
Cheers for the lens wrench link Mark, I have seen Cross point drivers but i always seem to make a ballsup when looking for stuff like this, so thought i would ask here first. i have a bit of a shutter squeel on my new canon A1 and want to have a go at lubricating it but don't want to damage the screws as its immaculate.
Steve. _________________ I got where I am by avoiding where I was going.
Now where was I? |
|
| Volver arriba |
|
 |
pentaxpete
 Registrado: 02 Dic 2011 Mensajes: 697 Ubicación: BRENTWOOD England
|
 Publicado: Dom Mar 30, 2014 5:48 pm Asunto: Canon A-1 Squeal -- |
|
 Publicado: Dom Mar 30, 2014 5:48 pm Asunto: Canon A-1 Squeal -- |
|
|
pentaxpete wrote:
I was given a Canon A-1 which had been in a loft for 7 years since the owner died -- it had the famous Canon Squeal -- well, I read up a LOT about it and looked at you tubes about it -- I found on a forum about the 'MAPLIN Spectacle Repair Kit' for about £2-50 and a MAPLIN branch just opened here in Brentwood High Street so I rushed round there and a bloke found the kit and I found a small scewdriver with a pointy thing which FITS the Japanese screws all for £ 2-50 -- and after a lot of trying I lubricated my A-1 with 'Three-in-One' oil - ONE DROP only on the end of a piece of electrical fuse-wire I passed down the space in the base-plate-- since I have read on Forums NOT to use '3-in-one' oil as it is supposed to dry leaving a 'sticky mess' but I have not found anything on further checking inside the base-plate and I also touched LESS than one drop of oil into the cogs and pivots with my fuse-wire and it winds on better. _________________ Long Live REAL PHOTOGRAPHY ! |
|
| Volver arriba |
|
 |
bychance
 Registrado: 24 Abr 2013 Mensajes: 348 Ubicación: Kent, England
|
 Publicado: Dom Mar 30, 2014 11:20 pm Asunto: |
|
 Publicado: Dom Mar 30, 2014 11:20 pm Asunto: |
|
|
bychance wrote:
Well I ordered some electrical contact lubrication stuff from RS as recommended by lloydy plus a 11 piece watchmakers screwdriver set. I also ordered this http://www.amazon.co.uk/dp/B004ZQBYRS/ref=pe_385721_37986871_TE_item,
and this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=400586931572&ssPageName=ADME:L:OC:GB:3160 for lens butchery
So I recon that squeal is doomed.
On the lookout for a mint AE1 program now  _________________ I got where I am by avoiding where I was going.
Now where was I? |
|
| Volver arriba |
|
 |
Excalibur
 Registrado: 19 Jul 2009 Mensajes: 5018 Ubicación: UK
Expire: 2014-04-21
|
 Publicado: Lun Mar 31, 2014 5:39 am Asunto: |
|
 Publicado: Lun Mar 31, 2014 5:39 am Asunto: |
|
|
Excalibur wrote:
........or A1 ? _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Volver arriba |
|
 |
bychance
 Registrado: 24 Abr 2013 Mensajes: 348 Ubicación: Kent, England
|
 Publicado: Lun Mar 31, 2014 2:55 pm Asunto: |
|
 Publicado: Lun Mar 31, 2014 2:55 pm Asunto: |
|
|
bychance wrote:
No, I've got a mint A1 and a superb AE1, I bet i end up with the whole series, so cheap, why not. _________________ I got where I am by avoiding where I was going.
Now where was I? |
|
| Volver arriba |
|
 |
Gardener
 Registrado: 22 Sep 2013 Mensajes: 949 Ubicación: USA
|
 Publicado: Mié Abr 02, 2014 6:37 am Asunto: |
|
 Publicado: Mié Abr 02, 2014 6:37 am Asunto: |
|
|
Gardener wrote:
I have a Moody Tools 58-0219 and it's just that - decent. It has 4 screwdrivers, from #000 to #1, of which you realistically only need #0 and #00, the tips are very hard, but non-magnetic, which at times is great, but at other times is total PITA, handles are metal, and are fairly convenient until you encounter something which requires torque. I ended up supplementing the set with a couple of Megadora drivers, which are very nice except that the difference between 00 and 0 is too large for my taste. Eventually I also plan to get a driver with a torque bar and have words "Nikkor Buster" engraved on it, but it's a different story.
Re: spanner. I have two - regular black from Micro-Tools, and double sided Chinese one off e-bay. Neither is an answer for anybody prayers, but they get the job done. Most of the time. |
|
| Volver arriba |
|
 |
sceptic
 Registrado: 01 Jun 2013 Mensajes: 255
|
 Publicado: Mié Abr 02, 2014 7:10 am Asunto: |
|
 Publicado: Mié Abr 02, 2014 7:10 am Asunto: |
|
|
sceptic wrote:
I can´t recommend JIS screwsdrivers enough. They are so much better than Phillips head screwdrivers when it comes to working on lenses. For dealing with thread locker/glue, I use clean naphta dropped sparingly around the screw and then wait for a minute or two to let it work.
I know that Vivitar recommend using acetone on their thread locker/glue (they glue the name ring in place, for instance, which is quite uncommon), but naphta also worked fine.
As a makeshift lens spanner, a caliper is actually quite handy. Preferrably one that can be locked in position. Since it's so "short" you keep your hand close to the lens and can thus excert much force without it starting to wiggle (which can be the case with "proper" spanners, which you grab/hold further away from the thing you're trying to unscrew). I recommend holding the caliper/spanner still and rotate the lens instead, to minimize the risk of slipping.
Remove front ring by scepticswe, on Flickr _________________ Sony A7R and wildly varying flora of lenses |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Mié Abr 02, 2014 10:51 am Asunto: |
|
 Publicado: Mié Abr 02, 2014 10:51 am Asunto: |
|
|
Lloydy wrote:
Amazon / Micro Tools have got the sets of four USA made Moody Tools JIS screwdrivers at a good price of £16-89 at the moment - plus £5 P+P which is a bit steep, but you gotta live with it.
http://www.amazon.co.uk/JIS-Type-Driver-Set-Pollicis/dp/B004ZQBYRS/ref=sr_1_9?m=A3KY5TH59FPY5P&s=merchant-items&ie=UTF8&qid=1396427221&sr=1-9#productDetails
http://www.micro-tools.de/en/Screwdrivers-oxid/Individual/JIS-Type/JIS-Type-S-Driver-Set-Pollicis.html
.. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
bychance
 Registrado: 24 Abr 2013 Mensajes: 348 Ubicación: Kent, England
|
 Publicado: Mié Abr 02, 2014 1:53 pm Asunto: |
|
 Publicado: Mié Abr 02, 2014 1:53 pm Asunto: |
|
|
bychance wrote:
Exactly the set i went for, should arrive soon. _________________ I got where I am by avoiding where I was going.
Now where was I? |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Mié Abr 02, 2014 9:35 pm Asunto: |
|
 Publicado: Mié Abr 02, 2014 9:35 pm Asunto: |
|
|
philslizzy wrote:
| sceptic escribió: |
I can´t recommend JIS screwsdrivers enough. They are so much better than Phillips head screwdrivers when it comes to working on lenses. For dealing with thread locker/glue, I use clean naphta dropped sparingly around the screw and then wait for a minute or two to let it work.
I know that Vivitar recommend using acetone on their thread locker/glue (they glue the name ring in place, for instance, which is quite uncommon), but naphta also worked fine.
As a makeshift lens spanner, a caliper is actually quite handy. Preferrably one that can be locked in position. Since it's so "short" you keep your hand close to the lens and can thus excert much force without it starting to wiggle (which can be the case with "proper" spanners, which you grab/hold further away from the thing you're trying to unscrew). I recommend holding the caliper/spanner still and rotate the lens instead, to minimize the risk of slipping.
Remove front ring by scepticswe, on Flickr |
Blu-tak will do the job too if you make a snake of it round the lens and turn the whole thing while pressing it in to the palm of your hand. It will not damage the metal and if it smears on the lens it will just rub off.
Oh, btw dont use Philips screwdrivers, they have that extra cross and the driver will not reach the bottom of the screw head. Use plain cross heads.
Philips are designed to pop out if too much torque is applied. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|