MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

My darkbag has arrived. Now how do I patch pinholes?
Ver tema anterior :: Ver tema siguiente  


Reply

My kit is coming together but until I patch the pinholes (found 2) I'm at a standstill. The pinholes are at the corner of the bellows where the sections are all bunched up. What do you use to do it? I'd prefer not using tape. This is not a leather bellows but something else.


Reply

I've used black automotive silicone goop, I see some have used black fabric paint.

I bought some of this - it's meant for cameras like yours and works well.

http://www.equinoxphotographic.com/bellows.htm


Reply

Nesster escribió:
I've used black automotive silicone goop, I see some have used black fabric paint.

I bought some of this - it's meant for cameras like yours and works well.

http://www.equinoxphotographic.com/bellows.htm

+1


Reply

I cannot see what the product is?


Reply

equinox has a very bad web site... the bellows patch compound is here:
http://www.equinoxphotographic.com/large.htm
in the film holders, adapters and packs section Rolling Eyes


Reply

I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


Reply

Farside escribió:
I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


What is PVA 50/50?


Reply

Nesster escribió:
equinox has a very bad web site... the bellows patch compound is here:
http://www.equinoxphotographic.com/large.htm
in the film holders, adapters and packs section Rolling Eyes


email sent. Thanks my friend!


Reply

Big Dawg escribió:
Farside escribió:
I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


What is PVA 50/50?


PVA glue mixed with black poster paint at a 1 to 1 ratio. K.


Reply

womble escribió:
Big Dawg escribió:
Farside escribió:
I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


What is PVA 50/50?


PVA glue mixed with black poster paint at a 1 to 1 ratio. K.


Answers my question. Thanks!

Here a more common name is Elmer's glue not polyvinyl acetate.