MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Voigtlander Bessa vs Fujifilm X-Pro1 & Stand Development
Ver tema anterior :: Ver tema siguiente  


Reply

Here is another shot using my Voigtlander Bessa R3A and Voigtlander Classic 40mm f1.4 lens combo. Emily meet me for a model portfolio shoot near Reading. This was taken on 35mm Kodak TMax 100 film, stand development in my usual brew - 3:1 Xtol & 1:100 rodinal for 19 mins at 20 degrees.


Voigtlander Bessa R3A Portrait by MatthewOsbornePhotography_, on Flickr

19mins works for me with no agitation. I use 21min for ISO 200 and 23min for ISO 400 if you are interested. I tried longer developing times and the highlights were blown out. I'm not sure if this is because I use a combo of xtol & rodinal for film developing.

Stand development:

Here is an excellent post for those that have never tried or know about stand developing. I only found it yesterday so am tempted to try developing film in Rodinal 1:100 without Xtol. http://jbhildebrand.com/2011/tutorials/workflow-tutorial-2-stand-development-with-rodinal/

I discovered stand developing with my developer brew by accident and then tweaked the times down from 1 hour to the times I now use. I used to use the same brew but agitate the developer in the past however the results are relatively similar and stand developing is just so easy. Fill your Paterson tank then go and make a cuppa and return in 20mins. Easy peasy!

Voigtlander Bessa R3A vs Fujifilm X-Pro1:

I bought the Bessa R3A rangefinder camera soley because I love the Voigtlander Classic 40mm f1.4 lens. I am not a huge fan of the rangefinder focus system as I like to see the DOF especially as I often shoot at f1.4. As the Voigtlander lenses will not fit an SLR/ Nikon DSLR body am already tempted by the thought of getting a Fujifilm X-Pro1. My main gripe with the Fujifilm X-Pro1 is it is not full frame. This is fine if you use the Fujifilm lenses but I would like to use my Voigtlander 21mm f4 and Voigtlander Classic 40mm f1.4 on a Fujifilm X-Pro1. I loose the 21mm and 40mm focal lengths.

Here are more examples of model photography on film using my Voigtlander Bessa R3A and Voigtlander Classic 40mm f1.4 lens combo: http://matthewosbornephotography.wordpress.com/2013/06/05/voigtlander-bessa-r3a-nokton-40mm-f1-4