| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
dof
 Registrado: 04 Feb 2009 Mensajes: 339 Ubicación: Southern California
|
 Publicado: Mié Feb 04, 2009 5:55 pm Asunto: Lens filter ring vice? |
|
 Publicado: Mié Feb 04, 2009 5:55 pm Asunto: Lens filter ring vice? |
|
|
dof wrote:
Do those lens filter ring vices really work in removing dings in filter rings?
If not, is there another way that doesn't mangle?
Thanks |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mié Feb 04, 2009 5:57 pm Asunto: |
|
 Publicado: Mié Feb 04, 2009 5:57 pm Asunto: |
|
|
Attila wrote:
My technician use something successfully after recovering hard to recognize genuine damage. |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Jue Feb 19, 2009 7:17 am Asunto: |
|
 Publicado: Jue Feb 19, 2009 7:17 am Asunto: |
|
|
martinsmith99 wrote:
Are they that hard to straighten?
I have a dinged nameplate on my Chinon, thanks to the postman. That's the only fault with it and would like to get it back to 100%. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
rick_oleson
 Registrado: 26 Feb 2007 Mensajes: 386 Ubicación: Lexington Kentucky USA
|
 Publicado: Jue Feb 19, 2009 12:04 pm Asunto: |
|
 Publicado: Jue Feb 19, 2009 12:04 pm Asunto: |
|
|
rick_oleson wrote:
I have one of those tools, and my results have been okay but not perfect: the vise straightens a dent by pushing against the ring on the opposite side, and in some cases this can cause deformation on the good side before the dent is straight. Also, since it only pushes from one side, it may not completely straighten the kinks at the edges of the dent. My short answer is that if you just want to make the filter ring usable again the vise will probably do that, but if you want a good cosmetic repair it's not likely to be good enough.
The best tools for this are probably the wooden blocks with circular notches at the top sized to fit the lens ring. You set the dented part of the lens in this and then pound the dent out from inside with a wooden stick and a hammer. If the block and stick are a good fit, you can get a very good repair this way, although it is slower. _________________ I don't know what I want to be when I grow up |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Jue Feb 19, 2009 3:00 pm Asunto: |
|
 Publicado: Jue Feb 19, 2009 3:00 pm Asunto: |
|
|
martinsmith99 wrote:
Hmm, providing you can get the ring out. Mine's stuck fast so it looks like the threads may need cleaning. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
rick_oleson
 Registrado: 26 Feb 2007 Mensajes: 386 Ubicación: Lexington Kentucky USA
|
 Publicado: Jue Feb 19, 2009 11:40 pm Asunto: |
|
 Publicado: Jue Feb 19, 2009 11:40 pm Asunto: |
|
|
rick_oleson wrote:
No, you do this with the lens still assembled. _________________ I don't know what I want to be when I grow up |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|