| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Lun Abr 02, 2012 7:34 pm Asunto: Problem with Epson Perfection 3200 scanner |
|
 Publicado: Lun Abr 02, 2012 7:34 pm Asunto: Problem with Epson Perfection 3200 scanner |
|
|
iangreenhalgh1 wrote:
Anyone ever seen anything like this before?
A strange blue cast offset a few mm, almost like a double exposure.
Epson support are no help at all, they sent me an automated reply telling me to clean my printer head nozzles! WTF?
I'm wondering if the scanner is faulty, with the blue sensor being out of alignment?
 _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
marty
 Registrado: 09 Abr 2009 Mensajes: 767 Ubicación: Italy
|
 Publicado: Mar Abr 03, 2012 8:44 am Asunto: |
|
 Publicado: Mar Abr 03, 2012 8:44 am Asunto: |
|
|
marty wrote:
Hi there. You're not alone . I got the same problem (among the others) with V500. What I can tell, after investigation, is that is not a driver problem (does the same under either windoze and linux), it is not the USB cable (I used to use a longer one for logistic reasons and reverting to the original did not change anything), reading the web seemed that could be dust related but after careful cleaning of the glass (even internal and even the TPU) the issue did not disappear. To make things even stranger it looks like that in my case only color neg is affected, with BW material I couldn't see faults. I tried to rotate the film strip 180° in the holder and even upside down with no help (it just seems to be slight better when using the right hand slot). Just to complete the picture opaque originals are not affected. Maybe color negs are just too dense?
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Volver arriba |
|
 |
peterqd
 Registrado: 28 Feb 2007 Mensajes: 7449 Ubicación: near High Wycombe, UK
Expire: 2014-01-04
|
 Publicado: Mar Abr 03, 2012 10:28 am Asunto: |
|
 Publicado: Mar Abr 03, 2012 10:28 am Asunto: |
|
|
peterqd wrote:
Ian, try scanning it again with the film the other way round, ie rotated 180° in the film holder. If the shadow is identical to the original scans then the problem is with the film. If the shadow rotates too then it's the scanner.
The overall blue cast is exactly what I get with the V700. I've made Photoshop actions to correct it for several different films. _________________ Peter - Moderator |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mié Abr 04, 2012 1:31 am Asunto: |
|
 Publicado: Mié Abr 04, 2012 1:31 am Asunto: |
|
|
iangreenhalgh1 wrote:
It's not an overall blue cast, it's a shifting of the blue to one side, it happens with all the different negs I've tried to scan, regardless of which way round I have them:
 _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Mié Abr 04, 2012 1:51 am Asunto: |
|
 Publicado: Mié Abr 04, 2012 1:51 am Asunto: |
|
|
Orio wrote:
Have you examined the negs carefully to ensure it's not on there?
Made any test print of a neg at the local lab? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mié Abr 04, 2012 2:05 am Asunto: |
|
 Publicado: Mié Abr 04, 2012 2:05 am Asunto: |
|
|
iangreenhalgh1 wrote:
Yes, definitely not on the negs, I've tried 5 or 6 different films, the lab scans are fine:
 _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
marty
 Registrado: 09 Abr 2009 Mensajes: 767 Ubicación: Italy
|
 Publicado: Mié Abr 04, 2012 8:23 am Asunto: |
|
 Publicado: Mié Abr 04, 2012 8:23 am Asunto: |
|
|
marty wrote:
Same here. The fault is definitely not on the film, my RA-4 prints are as fine as they could be.
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mié Abr 04, 2012 11:38 am Asunto: |
|
 Publicado: Mié Abr 04, 2012 11:38 am Asunto: |
|
|
iangreenhalgh1 wrote:
It just occurred to me to try scanning something else other than a negative:
Looks like a faulty scanner to me.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|