MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Male thread to Nikon F adapter
Ver tema anterior :: Ver tema siguiente  


Reply

Hi, I'm considering buying a MTO 1000/10, its quite cheap and that's probably partly due to the mount : instead of an M39/42 it has a 58mm male thread rear.
From a quick search I didn't find a female thread to F mount adapter. Are these being made, maybe to attach cameras and eyepieces ?


Reply

Hello,

You could try a Nikon K2 ring (to be found in a K-ring set) and a 52 to 58 mm step-up ring. The K2 has a F-mount bayonet and female 52 mm thread.


Reply

Gurdie escribió:
Hello,

You could try a Nikon K2 ring (to be found in a K-ring set) and a 52 to 58 mm step-up ring. The K2 has a F-mount bayonet and female 52 mm thread.


the idea sounds good, nevertheless i wouldn´t trust this 52/58 filterthreats to hold the cam during a walk in the field, would take it only on balcony with a lot of pillows on the planned impact area of the cam


Reply

56 DIN escribió:
the idea sounds good, nevertheless i wouldn´t trust this 52/58 filterthreats to hold the cam during a walk in the field, would take it only on balcony with a lot of pillows on the planned impact area of the cam


Yes, I agree. I have only used the K-ring to reverse a light lens, like a 50 mm, not to support a 1000 mm mirror lens. The thread is quite shallow. And the step-up rings are normally used for filters only.