MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Canon FS 4000 scanner trial II
Ver tema anterior :: Ver tema siguiente  


Reply

I bought an Elan IIE with battery grip in the early fall (2011). I had some film from it I took in late October I hadn't scanned yet. So a good excuse to try the FS4000 again. If I can find a SCSI cable for it I am going to try it on an older computer i have for the EOS 1v software, with XP Pro SP3 on it. I think my son in law has one. I have to look it up again, but I think its 51 pins. I have a cable but it won't fit the scanner.

Just snaps, trying the camera. Fuji Superia X-Tra 400. No idea what I had on for a lense that day.

Dudleys lets play position.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677082821&k=Z83gpZb&lb=1&s=A][/url]

Maxwell, wondering why we were out in a snow storm.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677083907&k=H2b2xG3&lb=1&s=A][/url]

Smelling where a coyote pack passed through. Our early morning walk. Kind of hard on the bare fingers caring a camera.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677084813&k=4LLDH33&lb=1&s=A][/url]

Marking a coyote waste pile as his territory, then kicking stuff all over it.
[url=http://ronmorsephoto.smugmug.com/Pets/Canon-Elan-IIE/21087009_tgPfr5#!i=1677084831&k=wD6BwqK&lb=1&s=A][/url]


Editado por última vez por Schnauzer el Jue Ene 19, 2012 12:42 am; editado 1 vez en total


Reply

These are very good results ! Great subjects certainly help to believe result is stunning!


Reply

It's conclusive, isn't it? That scanner's superb Cool

...and adorable dogs too Very Happy


Reply

Attila escribió:
These are very good results ! Great subjects certainly help to believe result is stunning!


Thanks Attila. So far I'm real happy although I haven't done a lot of negs yet. Now if I just had all those beautiful places to take pictures of that you do. Glad you like my boys.


Reply

GrahamNR17 escribió:
It's conclusive, isn't it? That scanner's superb Cool

...and adorable dogs too Very Happy


Thanks Graham. So far so good. I'll tell my boys you like them. They are my constant companions

What did you work out with your scanning? I remember the scanning thread you started.


Reply

Schnauzer escribió:
GrahamNR17 escribió:
It's conclusive, isn't it? That scanner's superb Cool

...and adorable dogs too Very Happy


Thanks Graham. So far so good. I'll tell my boys you like them. They are my constant companions

What did you work out with your scanning? I remember the scanning thread you started.
I concluded there aren't any affordable good scanners still being made, and the good older ones still fetch too much money (as a generalisation). So I turned to copying with digital, and I am getting results similar (but not as good) as yours and Laurence's.

My hurdle at the moment is in the post-processing with he heavy blue cast. Once I can overcome that, I shall publish some results Embarassed I should probably man-up and ask for help on another thread Laughing


Reply

Schauzer, looks great! Is your Canon FS 4000 scanner USB?


Reply

GrahamNR17 escribió:
It's conclusive, isn't it? That scanner's superb Cool


I've told you, if you remember Wink

Cita:
I concluded there aren't any affordable good scanners still being made, and the good older ones still fetch too much money (as a generalisation).

how much is "affordable" ?


Reply

Schnauzer escribió:
I bought an Elan IIE with battery grip in the early fall (2011). I had some film from it I took in late October I hadn't scanned yet. So a good excuse to try the FS4000 again. If I can find a SCSI cable for it I am going to try it on an older computer i have for the EOS 1v software, with XP Pro SP3 on it. I think my son in law has one. I have to look it up again, but I think its 51 pins. I have a cable but it won't fit the scanner.

Just snaps, trying the camera. Fuji Superia X-Tra 400. No idea what I had on for a lense that day.


It's a great camera,in my opinion.I love mine and I feel guilty I don't use it enough.
Great results with this scanner.When I bought my scanner ,they were a little over my "affordable" target and quite rare ,so went to Minolta. Congrats, you have two good pieces of gear.


Reply

GrahamNR17 escribió:
Schnauzer escribió:
GrahamNR17 escribió:
It's conclusive, isn't it? That scanner's superb Cool

...and adorable dogs too Very Happy


Thanks Graham. So far so good. I'll tell my boys you like them. They are my constant companions

What did you work out with your scanning? I remember the scanning thread you started.
I concluded there aren't any affordable good scanners still being made, and the good older ones still fetch too much money (as a generalisation). So I turned to copying with digital, and I am getting results similar (but not as good) as yours and Laurence's.

My hurdle at the moment is in the post-processing with he heavy blue cast. Once I can overcome that, I shall publish some results Embarassed I should probably man-up and ask for help on another thread Laughing


Find the black point and the white point in PS and that should take care of the blue cast.


Reply

Kram escribió:
Schauzer, looks great! Is your Canon FS 4000 scanner USB?


Thank you. I am using the USB cable. Its USB 1.? and not as fast as the USB 2. I tried a couple of scans at 4000dpi and it is slow. I am not complaining, for the quality of scans I'm getting now I can live with a little wait. Actually at 2000dpi it isn't all that slow.


Reply

yinyangbt escribió:
Schnauzer escribió:
I bought an Elan IIE with battery grip in the early fall (2011). I had some film from it I took in late October I hadn't scanned yet. So a good excuse to try the FS4000 again. If I can find a SCSI cable for it I am going to try it on an older computer i have for the EOS 1v software, with XP Pro SP3 on it. I think my son in law has one. I have to look it up again, but I think its 51 pins. I have a cable but it won't fit the scanner.

Just snaps, trying the camera. Fuji Superia X-Tra 400. No idea what I had on for a lense that day.


It's a great camera,in my opinion.I love mine and I feel guilty I don't use it enough.
Great results with this scanner.When I bought my scanner ,they were a little over my "affordable" target and quite rare ,so went to Minolta. Congrats, you have two good pieces of gear.


I like the camera very much. I already had one without the battery grip for a long time. I wanted a battery grip for it and bid on a camera with grip and nice strap for $34.00 and got it. The camera turned out to be in excellent shape so I semi-retired my old one.

I had bid on a few FS4000s, but they all went for more than I bid. I told my wife I wasn't going to pay that kind of money for an old scanner. She saw one going cheap and bid on it for me. She got it and it turned out to be like new. Doesn't look like the slide holder had been used.

http://www.ebay.com/itm/320824796759?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648

Their is another one on the bay right now but it doesn't have a film holder with it.
http://www.ebay.com/itm/400206696790?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648


Reply

yinyangbt escribió:
GrahamNR17 escribió:
It's conclusive, isn't it? That scanner's superb Cool


I've told you, if you remember Wink
Yes yes yes Embarassed Anyway, now you sound like my ex wife Laughing

yinyangbt escribió:
how much is "affordable" ?
Good question. I would suggest under 500 Euro would be affordable for an enthusiast, or at least a price they'd be prepared to pay.


Reply

GrahamNR17 escribió:
yinyangbt escribió:
GrahamNR17 escribió:
It's conclusive, isn't it? That scanner's superb Cool


I've told you, if you remember Wink
Yes yes yes Embarassed Anyway, now you sound like my ex wife Laughing

yinyangbt escribió:
how much is "affordable" ?
Good question. I would suggest under 500 Euro would be affordable for an enthusiast, or at least a price they'd be prepared to pay.

Laughing Laughing Laughing
Well , as old good Albert said everything is relative Laughing
That depends on how much one has to scan. On the price that Ron was lucky to pay for his Canon I'd say it's "affordable but over the ammount I'd be prepared to pay" Laughing