MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

How can we set the aperature reading on a M42 - EOS adapter?
Ver tema anterior :: Ver tema siguiente  


Reply

I have a few generic no-name M42 to EOS adapters that come pre set with aperture settings. Some are always set to 1.4, some always set to 2.0. Since I rarely change adapters, what I'd like to do is program each one to the widest aperture of the lens it's connected to, so that the metering is accurate when I'm working wide open.

I know there's a way to do it, but exactly how escapes me. Can anyone here point me in the right direction? Thanks Smile


Reply

Well, not all the chipped EOS adapters are programmable ... If yours are equipped with EMF or Optix chips, you can set the f/stop value,
the focal length and the micro-AF adjustment. Otherwise, you're out of luck and you will have to cope with the fixed focal length and
aperture ...

For EMF programming, look here.
For Optix programming, look here.

Eventually, there is another chip, the Dandelion. I don't know if it is an alias for the Optix one or not. Anyway, its programming info
are here.

Hope this helps ...