MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Pinhole body cap for EOS
Ver tema anterior :: Ver tema siguiente  


Reply

Does anyone know if this pinhole body cap for EOS:

Haz clic aquí para verlo en eBay

is available somewhere else than this shop?


Reply

Hi Orio,
What people use to do here is to drill a small hole in a body cap..
However this seems to be more elaborate...
Best regards,
Jes.


Reply

yes, the problem with drilling is that first, you have to be very good at that, because we are talking of nearly microscopic sizes; secondly, plastic of body caps is difficult to be drilled cleanly - it would leave fringes and these, as far as I know (maybe Veijo can correct me) would cause diffraction and important loss of image quality.


Reply

Orio escribió:
yes, the problem with drilling is that first, you have to be very good at that, because we are talking of nearly microscopic sizes; secondly, plastic of body caps is difficult to be drilled cleanly - it would leave fringes and these, as far as I know (maybe Veijo can correct me) would cause diffraction and important loss of image quality.


That's right. What I did, is to drill a hole of about 0.5 cm diameter and then pinch a tiny hole with a hot needle into a frame of fully exposed slide film (which is nearly black). This frame I glued to the small hole in the body cap.

Well, it kind of worked, but not really... Even with a hole in film materiel you cannot be precise enough. It is good for a first try, though.


Reply

Also, you could try to find something like that and use that instead of the pinched slide film: Haz clic aquí para verlo en eBay


Reply

I have been using this one: Haz clic aquí para verlo en eBay

Veijo


Reply

vilva escribió:
I have been using this one: Haz clic aquí para verlo en eBay
Veijo


I'll give it a try, Veijo - any feedback on it?


Reply

Orio escribió:

I'll give it a try, Veijo - any feedback on it?


Well, a body cap is a body cap, and the pinholes are very clean, cleaner than the laser cut ones I've previously been using. The 0.25 mm pinhole diameter is best suited for relatively distant subjects.

Veijo


Reply

vilva escribió:
The 0.25 mm pinhole diameter is best suited for relatively distant subjects.

Veijo


Why? I thought that the DOF in a pinhole camera was virtually infinite. Does it depend on the size of the aperture like a normal lens instead?


Reply

Orio escribió:
vilva escribió:
The 0.25 mm pinhole diameter is best suited for relatively distant subjects.

Veijo


Why? I thought that the DOF in a pinhole camera was virtually infinite. Does it depend on the size of the aperture like a normal lens instead?


The DOF isn't quite infinite, the optimum pinhole diameter depends on the pinhole to subject distance - the nearer the subject, the smaller the diameter ought to be. However, in practice it makes relatively little difference unless the nearest subjects are within a few centimeters from the pinhole or even nearer. Excluding real macro photography, two diameters will be enough or even one compromise diameter. For an SLR body cap, the two diameters would generally be 0.25 mm for distant main subjects and 0.2 mm for main subjects at 10 - 50 cm. At 1-2 m, the difference between these two diameters is probably negligible.

Veijo


Reply

Orio escribió:
Does anyone know if this pinhole body cap for EOS:

Haz clic aquí para verlo en eBay

is available somewhere else than this shop?


Henry's is a store I've dealt with for years - very reputable, and has been in business for many years. Many pros deal with them.


Reply

j.lukow escribió:

Henry's is a store I've dealt with for years - very reputable, and has been in business for many years. Many pros deal with them.


They do not accept Paypal and do not accept IBAN or any other kind of internationally standard bank transfer.
So they have chosen not to make business with me - not the other way around.
-


Reply

vilva escribió:
I have been using this one: Haz clic aquí para verlo en eBay

Veijo


As a very spontaneous decision, I bought one of those.
Very nice seller, very good communication, very fast shipping.
Great add-ons (Pinhole calculation and exposure calculation programms, microscopic picture you your personal pinhole!) and well packed.

The body cap pinhole seems to work (I did not have the time to try seriously...)

Thanks, Veijo.