MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

x100 settings suggestions: film/shadow clipping/custom
Ver tema anterior :: Ver tema siguiente  


Reply

as everyone knows by now, i am just loving my x100, and ive had it coming on 3 weeks now. i am starting to explore its workings a little bit deeper and thought i would share some settings that might be helpful to other users.

FILM SIMULATION: ive found that the standard PROVIA setting is perhaps the most accurate color replicator i have ever used, so i primarily keep that as my main film setting. since there are few situations where i feel the artistic need to control iso, i keep this to 'auto' with a low shutter speed of 1/60 and the camera does a spectacular job of picking the proper iso. this is a necessary setting to have if, like me, you also keep the HDR setting to auto, because one of the ways it controls highlight/shadow problems is by boosting the iso. this is fine, because in any lighting situation photos are stunning up to and including iso 3200. i like sharp pictures so i boost sharpness to medium hard as i found the 'hard' setting displeasing. i keep all other settings to normal, including 'noise reduction', which i typically despise on every other camera ive used, but have found to be just fabulous on the x100. turning it off does not improve sharpness to a noticeable degree, but increases noise to a disagreeable degree.

from these basic settings one can easily change FILM SIMULATION to 'monochrome bw' either 'yellow filter' for most street shooting or 'green filter' for lovely portrait/delicate skin tones. the settings i listed above work great with bw and dont have to be changed.

for dramatic bw skies i use 'red filter' and set 'highlight tone' to hard to increase sky contrast.

i also like the 'velvia' setting for 'popping' landscapes. however, this setting does badly clip shadows, so i set 'shadow tone' to 'soft' and that totally corrects it. it does not, contrary to the word 'soft', have any effect on image sharpness that ive noticed.

imo the ASTIA setting is not nearly as color accurate as PROVIA, nor is it as nicely saturated as VELVIA. it is also 'soft', so i personally have found it useless.

CUSTOM SETTINGS: many reviewers and owners have complained about the custom setting feature, which offers 3 sets of customizable settings. certainly it could be easier or better or whatever, but its a tool that i found can be relatively easily adapted, at least to my way of shooting. since as you can see from the above, my 'basic' settings (or anyone's basic settings for that matter) can be easily cross-used in 'provia', 'bw yellow' and 'bw green', i preserve these settings as CUSTOM 1, where they are easily accessed. i can then change from the base 'provia' setting to either other 'bw' setting by pressing the FN button that i have set to Film Simulation. making that film simulation change as shooting situation dictate never effects my basic saved settings.

because i also shoot velvia for landscapes, i make those settings listed above as my CUSTOM 2, so i can easily go from street shooting to landscapes or buildings as needed. and because i set 'bw red filter' differently than yellow and green, i keep these settings preserved as CUSTOM 3.

as for metering, i typically leave it on the MULTI setting, which is center weighted. for landscapes i sometimes move it to AVERAGE and achieve nice results. for indoors/low light i always use SPOT and that has worked out great.

i hope you x100 users find these helpful!
tony


Reply

thanks. i understand most of that ... Smile