| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
ellepi
 Registrado: 07 Ago 2010 Mensajes: 486 Ubicación: Treviso - Italia
|
 Publicado: Mié Ago 03, 2011 5:24 pm Asunto: I've done! |
|
 Publicado: Mié Ago 03, 2011 5:24 pm Asunto: I've done! |
|
|
ellepi wrote:
Finally,
after some weeks looking for an enlarger with right price (for me), I found it!
I just bought a Durst M609 in perfect condition to print my 6x4,5 shots.
From September (when I came back to my house from my actual commissioned work) I will start printing at last.
Do you have some advice? Some web link to the right workflow?
Luca _________________ M42 | Super Takumar 20/4, 28/3.5, 35/3.5, 55/1.8, 105/2.8, 135/3.5, 200/4 - Tair-11A - Helios-44M - Mir-1B
K | Pentax M40/2.8, K 55/2, A 50/1.7, M 50/1.7, M 135/3.5 - Jupiter 37-AM
Micro nikkor 60/2.8
Mamiya 645 | Sekor 24/4, 55/2.8, 80/2.8, 210/4 |
|
| Volver arriba |
|
 |
std
 Registrado: 09 Feb 2010 Mensajes: 1826 Ubicación: Bulgaria
|
 Publicado: Mié Ago 03, 2011 7:15 pm Asunto: |
|
 Publicado: Mié Ago 03, 2011 7:15 pm Asunto: |
|
|
std wrote:
It will be nice if you can find and read the Ansel Adams books, especially 'The print'.
There is a theory there, workflow and lots of examples for printing techniques.
Even there are chemistry recipes if you decide to mix your own chemicals.
In the beginning it looks a lot to read but when you finish with it and try some prints then you realize it is just the foundation and you need to practice more.
good luck with printing  _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| Volver arriba |
|
 |
mmelvis
 Registrado: 24 Mayo 2010 Mensajes: 1326 Ubicación: Florida,USA
Expire: 2015-05-09
|
 Publicado: Mié Ago 03, 2011 10:22 pm Asunto: |
|
 Publicado: Mié Ago 03, 2011 10:22 pm Asunto: |
|
|
mmelvis wrote:
Look forward seeing the results from the new setup |
|
| Volver arriba |
|
 |
marty
 Registrado: 09 Abr 2009 Mensajes: 767 Ubicación: Italy
|
 Publicado: Sáb Ago 06, 2011 7:10 pm Asunto: |
|
 Publicado: Sáb Ago 06, 2011 7:10 pm Asunto: |
|
|
marty wrote:
Hi, Luca. Let me tell you, there is no right or wrong workflow (apart the obvious, that is). There will be "one" workflow that will eventually work for you and you will find it with the experience, just don't be in a hurry. That said, my advice is to be very consistent with film exposure and development. Just stick with one film and one developer to begin with (I assume we're talking about b&w, but in principle nothing changes). Always make a proof sheet of the entire roll, the rule here is that you have to get viewable frames with no visible edges, the unexposed edges of the film have to be as black as the surroundings, that is. If you cannot achieve this no problem, in most cases you'll be able to make satisfactory prints the same. You pick a frame you want to print and chose then the dimension of the enlargement and set up the enlarger. At this point make a incremental proof at grade 2. Cover with a cardboard all the paper but one strip and expose for 5". Uncover one strip at a time thereafter without moving the paper and expose each strip for 5". Develop and fix. Chose the time relative to the frame that looks best. Expose a fresh sheet with that time. If the contrast is satisfactory you're done, otherwise play with contrast grades. Remember that changing contrast grade the exposure might also need a tweak, your eyes will tell you. This is the process in a nutshell. I do not need to tell you to work under safelight from instant before to take out the paper box to the time the fix is at least at a half. I will not lie to you, you're going to waste lotsa paper in the beginning but after a while you will eventually reach a point when just looking at the initial proof sheet you'll be able to get a working print in the ball park. For a more detailed explanation I advice you to get yourself a good book on the subject. The Print by Adams (already mentioned) is considered by someone a kinda bible, I think it's a very good book along with The Negative and The Camera. If you feel you need a more basic introduction I advice Black & White Photography by Thomas Mc Govern, though I'm not sure if it's available an Italian version. Good light an good luck .
Best, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|