MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Junk M4/3 tube set from China
Ver tema anterior :: Ver tema siguiente  


Reply

Total junk, defective, and badly made. The normal problem with these cheap tubes are the prongs bent wrong, and very easy to over tighten.
Well it has that, plus the locking pin is the wrong diameter, and the wrong length. That's not the worst part. On every threaded part male and female their are damaged threads. There are little chips out of them. The number 2 tube will only turn a 1/4 turn when tightening it in the mount.
The number 3 tube tightens only about 1/2 way.

The only way I can imagaine this happening is in the manufacture process. Totally unaccetable to sell something like this.

Any one else buy bad tubes lately?