| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
8310
 Registrado: 05 Jun 2010 Mensajes: 123
|
 Publicado: Vie Mayo 27, 2011 9:19 pm Asunto: Contax Planar 1,4/50 AE disassembly? |
|
 Publicado: Vie Mayo 27, 2011 9:19 pm Asunto: Contax Planar 1,4/50 AE disassembly? |
|
|
8310 wrote:
I tried searching but could not find anything, so there you go:
I got ahold of a Contax Planar 50/1,4 AE that needs some relubing but so far I have not been able to disassemble it. After removing the front ring and the screws that hold the focus ring I can just move the focus ring but not remove it. Its inner diameter is too small to just take it off over the front.
As you can maybe understand, this lens is not exactly a doorstopper and does have some value, so I am inclined to get some more information before proceeding to experiment and just disassemble any parts that can be disassembled.
Any advice on the disassembly? Has anyone ever serviced this lens? Is there maybe even some sort of service manual anywhere out there? |
|
| Volver arriba |
|
 |
Himself
 Registrado: 01 Mar 2007 Mensajes: 3315 Ubicación: Montreal
Expire: 2013-05-30
|
 Publicado: Vie Mayo 27, 2011 9:35 pm Asunto: |
|
 Publicado: Vie Mayo 27, 2011 9:35 pm Asunto: |
|
|
Himself wrote:
No advice.
I wouldn't experiment on this one. And I do fixed quite a few lenses.
Now, your chances to sell that lens here, or any other Contax 50/1.4 are close to zero.
If you are in US of A look for a thread opened by BigDawg, he praises a certain shop but I don't remember where. _________________ Moderator Himself |
|
| Volver arriba |
|
 |
BRunner
 Registrado: 29 Jul 2009 Mensajes: 705 Ubicación: Czech Republic
|
 Publicado: Sáb Mayo 28, 2011 11:56 am Asunto: |
|
 Publicado: Sáb Mayo 28, 2011 11:56 am Asunto: |
|
|
BRunner wrote:
It's MMJ version, but hope it helps.
Overhaul of Contax Planar 1.4/50mm T* MMJ _________________ .: APO-Maniac :. |
|
| Volver arriba |
|
 |
8310
 Registrado: 05 Jun 2010 Mensajes: 123
|
 Publicado: Mié Jun 01, 2011 3:56 pm Asunto: |
|
 Publicado: Mié Jun 01, 2011 3:56 pm Asunto: |
|
|
8310 wrote:
Yes, that did help indeed. I was not aware that the focusing ring and the ring to fix the focusing ring can be separated. Problem solved, thanks.  |
|
| Volver arriba |
|
 |
qtmonster
Registrado: 15 Jun 2011 Mensajes: 37 Ubicación: Singapore
|
 Publicado: Mié Jun 15, 2011 2:57 pm Asunto: |
|
 Publicado: Mié Jun 15, 2011 2:57 pm Asunto: |
|
|
qtmonster wrote:
Hi 8310,
May I know how did you in the end manage to disassemble this lens?
I also have this particular version (AEJ I think), and I'm trying to relube the focus ring and also remove the aperture ball bearing (de-click it), but there are no screws on the back mount.
Let me know thanks!  |
|
| Volver arriba |
|
 |
8310
 Registrado: 05 Jun 2010 Mensajes: 123
|
 Publicado: Sáb Jun 18, 2011 8:11 pm Asunto: |
|
 Publicado: Sáb Jun 18, 2011 8:11 pm Asunto: |
|
|
8310 wrote:
I just had some time to finish reassembling it, so that is what I did. I cannot comment on the aperture ball bearing as I only relubed the helicoid.
Some lens parts were slightly different from the MM version linked above, but apart from only having front access and having to put the rear part back on earlier when assembling, the procedure is essentially the same. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|