| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Dom Jun 12, 2011 5:43 pm Asunto: Finally Taken the 120 Plunge |
|
 Publicado: Dom Jun 12, 2011 5:43 pm Asunto: Finally Taken the 120 Plunge |
|
|
martinsmith99 wrote:
Well, I have my 1st 120 folder on it's way to me, an Agfa Isolette with 85mm Apotar lens and Prontor-SVS shutter.
If the ebay ad is correct it's in good working order and no dings in the body, just a bit of pitting on the body.
Now to learn how to work it and load/unload the film. I have no idea how 120 works. Steep learning curve approaches. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
koji
 Registrado: 21 Jul 2008 Mensajes: 2108 Ubicación: Hiroshima, Japan
Expire: 2012-12-27
|
 Publicado: Dom Jun 12, 2011 5:52 pm Asunto: |
|
 Publicado: Dom Jun 12, 2011 5:52 pm Asunto: |
|
|
koji wrote:
This may help > http://www.butkus.org/chinon/agfa/agfa_isolette_4_5/agfa_isolette_4_5.htm
It is one of famous BUTKUS free manual pages, although he may want to
receive a donation I think.  _________________ Our Home Page has 18,200 photos in 575 directories today.
Lenses: https://www.pbase.com/kkawakami/top_level_my_lenses |
|
| Volver arriba |
|
 |
F16SUNSHINE
 Registrado: 20 Ago 2007 Mensajes: 5486 Ubicación: Left Coast
Expire: 2011-11-18
|
 Publicado: Dom Jun 12, 2011 6:11 pm Asunto: |
|
 Publicado: Dom Jun 12, 2011 6:11 pm Asunto: |
|
|
F16SUNSHINE wrote:
The learning curve for an experienced photographer as yourself will not be steep at all.
Shooting is nearly exactly the same in terms of exposure. One can use a higher ISO and still acheive fine grain.
The lens on your Isollete will be a similar equivalent to about a 4o+-ish mm lens on 35mm.
Being square this will be mostly lost.
Agfas are known for bad grease and bad bellows. Pay extra attention there when it arrives.
The isollete iii has a film advance warning system.earlier ones do not.
The Apotar is a tripplet. expect good center sharpness getting better in the corners as you stop down.
Fun camera. Congrats !  |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Dom Jun 12, 2011 6:20 pm Asunto: |
|
 Publicado: Dom Jun 12, 2011 6:20 pm Asunto: |
|
|
Attila wrote:
Good one really, I can't tell you more than Andy said, I have two of them they are lovely cameras.
If you would like to use it closer distance than infinity essential to buy an external range finder or use another camera with RF as distance meter.
Another inexpensive tip is an ultrasonic distance meter, which is works well on people statues , wall , but not works on those subjects where is no big surface like , bush , trees etc.
Oh one more, speed is rare or never same what you see on camera above 1/125 better to count real speed is half than written one on ring.
I suggest to take a speed measure tester from member vfmoto and measure speeds.
http://www.mflenses.com/gallery/v/filmcamera/german/agfa-isolette-8_5cm_fuji_xperia_100/?
http://www.mflenses.com/gallery/v/filmcamera/german/agfa-isolette-II-apotar-85mm/? |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Jue Jun 16, 2011 7:14 pm Asunto: |
|
 Publicado: Jue Jun 16, 2011 7:14 pm Asunto: |
|
|
martinsmith99 wrote:
Well, it's arrived an all in working order with clean lens and decent bellows. Just a little pitting on the top.
Loading the film will be the 1st test. I haven't got any kit for developing 120 film yet, so I'll probably put a roll of colour through it and get my local lab to dev it. And I'm not sure I'll take to the camera & format yet.
I managed to win a Watameter RF as my Blik RF is metric and the Agfa is imperial. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Jue Jun 16, 2011 7:17 pm Asunto: |
|
 Publicado: Jue Jun 16, 2011 7:17 pm Asunto: |
|
|
martinsmith99 wrote:
Sorry for the quality of the pic btw as it was taken on a cheap P&S. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Jue Jun 16, 2011 7:43 pm Asunto: |
|
 Publicado: Jue Jun 16, 2011 7:43 pm Asunto: |
|
|
cooltouch wrote:
If you have a kit for developing B&W 35mm, chances are it will work for 120 too. All the ones I've had will. You might have to get a 120 reel, depending on your setup. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Jue Jun 16, 2011 8:25 pm Asunto: |
|
 Publicado: Jue Jun 16, 2011 8:25 pm Asunto: |
|
|
Attila wrote:
Very good choice, now only need to know how shutter is accurate  |
|
| Volver arriba |
|
 |
mmelvis
 Registrado: 24 Mayo 2010 Mensajes: 1326 Ubicación: Florida,USA
Expire: 2015-05-09
|
 Publicado: Jue Jun 16, 2011 8:34 pm Asunto: |
|
 Publicado: Jue Jun 16, 2011 8:34 pm Asunto: |
|
|
mmelvis wrote:
Nice setup, look forward to your sample pics. |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Vie Jun 17, 2011 6:22 am Asunto: |
|
 Publicado: Vie Jun 17, 2011 6:22 am Asunto: |
|
|
martinsmith99 wrote:
| cooltouch escribió: |
| If you have a kit for developing B&W 35mm, chances are it will work for 120 too. All the ones I've had will. You might have to get a 120 reel, depending on your setup. |
Yes, I just need a reel & tank (stainless of course). _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Sáb Jun 18, 2011 4:33 pm Asunto: |
|
 Publicado: Sáb Jun 18, 2011 4:33 pm Asunto: |
|
|
Katastrofo wrote:
Congrats, Martin, and good luck, especially with the stainless steel reels.  |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Sáb Jun 18, 2011 5:27 pm Asunto: |
|
 Publicado: Sáb Jun 18, 2011 5:27 pm Asunto: |
|
|
cooltouch wrote:
Yeah, those SS reels are supposed to be easy to use, but I never got the hang of 'em. I prefer the ones like the Paterson reels -- where you can sort of crank the film onto the wheel with a back and forth motion of each of the reel's sides. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Sáb Jun 18, 2011 5:53 pm Asunto: |
|
 Publicado: Sáb Jun 18, 2011 5:53 pm Asunto: |
|
|
Attila wrote:
| cooltouch escribió: |
| Yeah, those SS reels are supposed to be easy to use, but I never got the hang of 'em. I prefer the ones like the Paterson reels -- where you can sort of crank the film onto the wheel with a back and forth motion of each of the reel's sides. |
+1 Peterson to me also. |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Sáb Jun 18, 2011 10:32 pm Asunto: |
|
 Publicado: Sáb Jun 18, 2011 10:32 pm Asunto: |
|
|
martinsmith99 wrote:
Strangely I went from the plastic crank reels as I could never get on with them. Stainless reels have been great. I may try an apron but I see they cause development problems. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Sáb Jun 18, 2011 11:59 pm Asunto: |
|
 Publicado: Sáb Jun 18, 2011 11:59 pm Asunto: |
|
|
cooltouch wrote:
To each his own. I've found with the plastic crank wheels, it takes a delicate touch. It's easy to misfeed the film then it starts getting jammed up. 35mm is also easier than 120 too. 120 takes a fair amount of patience and taking it slow at the beginning, but once it's fed onto the reel a bit, it gets a lot easier. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Dom Jun 19, 2011 3:05 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 3:05 pm Asunto: |
|
|
Katastrofo wrote:
I bought some stainless reels off the 'bay and all had a slight warp to them
from no doubt being dropped. Made spooling a nightmare. Got the Paterson
reels and never looked back. |
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Dom Jun 19, 2011 3:38 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 3:38 pm Asunto: |
|
|
Seele wrote:
| Katastrofo escribió: |
| I bought some stainless reels off the 'bay and all had a slight warp to them from no doubt being dropped. Made spooling a nightmare. Got the Paterson reels and never looked back. |
That is the problem with used steel reels, even the slightest distortion invisible to the unaided eye can stop them from being loaded properly.
But for me I threw out my Patersons ages ago and switched to Jobo and never looked back. Both the 1500 and 2500 series reels can take two rolls of 120 each, cutting down on chemical cost, and if you use rotary agitation it cuts chemical cost even further down. |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Dom Jun 19, 2011 4:25 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 4:25 pm Asunto: |
|
|
Katastrofo wrote:
I wanted Jobo, but prices for same were 2-3 times higher than the
Paterson. |
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Dom Jun 19, 2011 4:35 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 4:35 pm Asunto: |
|
|
Seele wrote:
| Katastrofo escribió: |
| I wanted Jobo, but prices for same were 2-3 times higher than the Paterson. |
I did not know that; when they were both readily available, Jobo products were about the same as Paterson's, if only a tiny bit more expensive. Of course when I go to camera shows I buy what I see! |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Dom Jun 19, 2011 8:05 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 8:05 pm Asunto: |
|
|
cooltouch wrote:
I sold off a bunch of photo gear on eBay about seven years ago that I'd been dragging around for over a decade, and among it was a big stash of jobo stuff that I'd acquired when I was a dealer. I don't recall what I got for it on eBay, but it wasn't nearly what it's selling for now. I just went there and did a search and was stunned at the prices people are asking for jobo tanks and reels. Argh! Never again, I tell myself. I've learned my lesson. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Dom Jun 19, 2011 11:08 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 11:08 pm Asunto: |
|
|
iangreenhalgh1 wrote:
In the Uk Jobo stuff was always more high-end and more expensive than Patterson, the difference in prices between the two I see on ebay these days would seem to me, to reflect the same difference that existed when they were new.
On stainless reels, I hate em, as seele said, drop one a few times (and you will, in the dark!) and they are much much harder to load.
I bought a 1960s patterson tank last week. Hadn't loaded one since the late 90s. It was like riding a bike, ripped the lid off the canister with my trusty rusty old pliers, cut the leader off with scissors then straight into the spool, feed it in 4-5 inches then start cranking. Only bit I found tricky was getting the last 8-9 inches onto the spool properly.
Horses for courses but I have always found the Patterson system so easy to use.
Never used Jobo, few of the colleges or universities had any, it was too expensive and for the pros. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Dom Jun 19, 2011 11:16 pm Asunto: |
|
 Publicado: Dom Jun 19, 2011 11:16 pm Asunto: |
|
|
cooltouch wrote:
I haven't had any problems with my Paterson tank and reels either, except for one thing. If I use it for inversion style developing, where I flip the tank end-for-end, it leaks. Guess that gasket's too old, but I dunno if I can get another. So what I do now -- for 35mm at least -- is use the spinner. I had a problem with one roll of 120 that I loaded into an old single reel Yankee tank I also own, which requires the spinner. The developed roll came out with ripples in about half the images, and folks over at APUG diagnosed the problem as using a spinner-style tank. So when I use my Paterson for 120, I just put up with the leaks and do the immersion method.
Other than that one problem, I like my Paterson just fine. And I have a fairly big tank too. It'll handle three reels of 35 and two of 120. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|