Test to see just how bad my D2H is to UV-IR contamination.
D2H + Marumi UV-IR Cut filter on my Sigma 28mm f1.8 AF lens + a black camera bag as the subject.
The positive side:
1) It really works! Black comes out truly black at low ISO. At higher ISO it is still closer to the true colour.
2) Images seems to be sharper at 3:1 zoom at ISO below 800. It is really not that obvious at 1:1.
3) Works under strong sunlight or tungsten lighting.
The negative side
1) Can be an expensive filter to get, especially HQ ver. Mine is middle of the road at $54.
2) There seem to be more green noise. I was expecting an overall small reduction in noise level. I am puzzled by this. It could be that there is more yellow / warm coloured noise without the filter, so with the filter on, it is showing more green coloured noise at higher ISO?
Good demonstration.
I think in reality most Digital Cameras would benifit from such a filter.
I saw a similar result when I tested my 5D using a Leica Branded 55mm filter on my Planar 50mm.
Tungsten light is especially IR "noisy".
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro