MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Yashica Electro 35 problem
Ver tema anterior :: Ver tema siguiente  


Reply

I loaded the film. The film is properly loaded, as it's described in the manual. The "battery" is made out of 4x1.5v lr44 batteries. The first ring is set to Auto. When I press the shutter button half way, if not correctly exposed, red arrow appears. But when I press it all the way, nothing happens. Is it possible that the battery hasn't properly set? Because, the red arrow is there and I don't think it would be there if the battery wasn't properly loaded.


Reply

If the red arrow is a light, you're getting current from the battery.

The Electro 35 has a mechanical shutter, so it should trip even without the battery. I have an Electro 35 GT and I just gave it a try. It doesn't have any batteries in it at the moment, but the shutter still trips. You can't get your shutter to fire at all?

How about the "slow" and "over" lights on top of the camera, do they light up at all? Does the shutter fire without the batteries?

If the shutter doesn't fire at all, chances are it's time for a CLA.


Reply

without battery the shutter fires at 1/500 max speed.

Something else isn't right with the shutter button... I don't know if, say, trying a cable release might give better response? Also, is the self timer set and stuck? Sometimes if that's the case nothing happens.