| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Vie Abr 08, 2011 9:23 pm Asunto: FOMA R09 experience |
|
 Publicado: Vie Abr 08, 2011 9:23 pm Asunto: FOMA R09 experience |
|
|
Attila wrote:
I bought an R09 developer made by FOMA is anybody use it ? |
|
| Volver arriba |
|
 |
marty
 Registrado: 09 Abr 2009 Mensajes: 767 Ubicación: Italy
|
 Publicado: Vie Abr 08, 2011 9:55 pm Asunto: |
|
 Publicado: Vie Abr 08, 2011 9:55 pm Asunto: |
|
|
marty wrote:
Hello, Attila. As far as I know is a Rodinal clone (the new Agfa is now calling the R. just R09 ). It's one of the long-lived formulas on the market. Gives good acutance and sharpness at the expense of some graininess. Greater dilutions somewhat tame the problem (if there is one ). Used at dilutions over 1:100 in stand development gives high compensating effect (I never tried this myself). I used the R. (either when it was still called R. and then with the new name R09) with Fp4+ and Delta 100 and what I can say is that I had mixed results. Not fault of the product itself, I think the variations from one roll to another was due to my rather poor measurement of the small quantities of product needed to make working solutions. In the meantime I got myself a medical syringe for a more precise measurement. I'll certainly giving it another shot (no pun intended ), sooner or later.
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Vie Abr 08, 2011 9:57 pm Asunto: |
|
 Publicado: Vie Abr 08, 2011 9:57 pm Asunto: |
|
|
Attila wrote:
Thank you Marty! |
|
| Volver arriba |
|
 |
marty
 Registrado: 09 Abr 2009 Mensajes: 767 Ubicación: Italy
|
 Publicado: Vie Abr 08, 2011 10:03 pm Asunto: |
|
 Publicado: Vie Abr 08, 2011 10:03 pm Asunto: |
|
|
marty wrote:
You're welcome .
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Volver arriba |
|
 |
hexi
 Registrado: 01 Jul 2009 Mensajes: 1631 Ubicación: France
Expire: 2011-11-18
|
 Publicado: Sáb Abr 09, 2011 6:44 am Asunto: |
|
 Publicado: Sáb Abr 09, 2011 6:44 am Asunto: |
|
|
hexi wrote:
It is indeed Rodinal, so i use it.
from my experience, the best dilution i found is 1+25, because it give the better contrats to the negative, otherwise 1+50 is ok if you like a neutral negative renditon
some people say, that Rodinal is not intended , due to the fact that it gives a huge amount of grain with some films. To that all i can say that's from my tests, it depends of the agitation method; i had pushed films up to 1600 and above with smooth grain.
do tests and enjoy  _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Volver arriba |
|
 |
wupdigoj
 Registrado: 18 Mar 2010 Mensajes: 85
|
 Publicado: Lun Abr 11, 2011 2:20 pm Asunto: |
|
 Publicado: Lun Abr 11, 2011 2:20 pm Asunto: |
|
|
wupdigoj wrote:
I used this developer some time ago. It was supposed to work just like Rodinal but with lower dilutions: 1:40 instead of 1:50, 1:80 instead of 1:100 and so on. In my sample the liquid was too much concentrated, so I had to use someting like 1:130 instead of 1:80 (i.e. more dilution than Rodinal). Of course I spoiled several films until I noticed this. Now I use "Agfa Rodinal" which behaves exactly as the original Rodinal.
I have also found lately some QC. problems with Foma films. It is a pity because Foma 100 and 200 are great films, IMO.
Javier
Editado por última vez por wupdigoj el Lun Abr 11, 2011 8:09 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Abr 11, 2011 3:38 pm Asunto: |
|
 Publicado: Lun Abr 11, 2011 3:38 pm Asunto: |
|
|
Attila wrote:
Many thanks Javier!! |
|
| Volver arriba |
|
 |
hexi
 Registrado: 01 Jul 2009 Mensajes: 1631 Ubicación: France
Expire: 2011-11-18
|
 Publicado: Lun Abr 11, 2011 3:49 pm Asunto: |
|
 Publicado: Lun Abr 11, 2011 3:49 pm Asunto: |
|
|
hexi wrote:
It's weird, because it is the same developer, with same dilution times than Rodinal. It's just rebadged, and from my experience so far i had no troubles whatsoever, especially with Foma film that i use much : ) _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Volver arriba |
|
 |
wupdigoj
 Registrado: 18 Mar 2010 Mensajes: 85
|
 Publicado: Lun Abr 11, 2011 8:18 pm Asunto: |
|
 Publicado: Lun Abr 11, 2011 8:18 pm Asunto: |
|
|
wupdigoj wrote:
| hexi escribió: |
| It's weird, because it is the same developer, with same dilution times than Rodinal. It's just rebadged, and from my experience so far i had no troubles whatsoever, especially with Foma film that i use much : ) |
I know. The Foma R09 I used was an older one. The new one uses the same developing dilutions as Rodinal. I think F. R09 was supposed to be the "original" Rodinal recipe.
I think that my sample was defective, too much concentrate. Once adjusted the dilution, the results were fine. Of course I suppose most of the batches must be correct.
The issues I have found with Foma films are independent of the developer, and had appeared mainly in Foma 200, 120 format : lots of tiny black dots in the film, which will apper in the copies. At first I thought it to be something related with my technique, but I finally isolated it as a film defect.
Javier |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Abr 11, 2011 8:25 pm Asunto: |
|
 Publicado: Lun Abr 11, 2011 8:25 pm Asunto: |
|
|
Attila wrote:
Good to know guys, thank you. I did use Foma 100 only, with FOMA LQR developer until now. I was very happy with this combo. |
|
| Volver arriba |
|
 |
piticu
 Registrado: 04 Ago 2008 Mensajes: 591 Ubicación: Romania
|
 Publicado: Mar Abr 12, 2011 12:39 am Asunto: |
|
 Publicado: Mar Abr 12, 2011 12:39 am Asunto: |
|
|
piticu wrote:
So why switch? fomapan and lqn/lqr gives great results. plus that they're cheap! _________________ www.atelierelealbe.eu |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mar Abr 12, 2011 12:59 am Asunto: |
|
 Publicado: Mar Abr 12, 2011 12:59 am Asunto: |
|
|
Attila wrote:
I did bought Agfa APX 100 in bulk (40) rolls and didn't find any clear instructions how can I use Foma developers with Agfa.
So I bought Rodinal . I did try a roll with Foma LQR same dillution , time etc than with Foma. It was fine. Next roll will be develop in Rodinal. |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Lun Abr 18, 2011 3:17 pm Asunto: |
|
 Publicado: Lun Abr 18, 2011 3:17 pm Asunto: |
|
|
Katastrofo wrote:
Fomadon R09 is a good developer, need to order more. I've posted this
before, but this is my result using Legacy Pro 400:
With 100 film, should be even better. |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Abr 18, 2011 3:43 pm Asunto: |
|
 Publicado: Lun Abr 18, 2011 3:43 pm Asunto: |
|
|
Attila wrote:
Nice gray scale right, with ISO 100 I think it will be perfect. |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Dom Mayo 01, 2011 7:25 pm Asunto: |
|
 Publicado: Dom Mayo 01, 2011 7:25 pm Asunto: |
|
|
martinsmith99 wrote:
Rodinal is my usual developer. I use at 1:50 and only agitate slightly once per minute.
I have used with HP5 at box speed, but I tend to pull it a stop or shoot slower films. Grain is acceptable and contrast is fairly low. I can always increase it afterwards if I need better contrast.
This one had harsh flash which I think has been tamed quite effectively:
Chinon_FP4_030 by martinsmith99, on Flickr _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Dom Mayo 01, 2011 10:49 pm Asunto: |
|
 Publicado: Dom Mayo 01, 2011 10:49 pm Asunto: |
|
|
Attila wrote:
How long did you develop it ? I like result very much.
Yesterday I did use first time R09 1:50 dilution 20C 18 min it was too long, pictures are came out pretty dark. Factory brochure said 1:50 dilution 17min. I had a film from 'unknown' source I decide it to develop a bit longer. |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Lun Mayo 02, 2011 11:00 am Asunto: |
|
 Publicado: Lun Mayo 02, 2011 11:00 am Asunto: |
|
|
martinsmith99 wrote:
| Attila escribió: |
How long did you develop it ? I like result very much.
Yesterday I did use first time R09 1:50 dilution 20C 18 min it was too long, pictures are came out pretty dark. Factory brochure said 1:50 dilution 17min. I had a film from 'unknown' source I decide it to develop a bit longer. |
Thanks
Taken with Chinon CE3 Memotron with Carl Zeiss Jena MC Sonnar 135mm lens, Ilford FP4+ shot at 80iso, developed in 1:50 Rodinal for 10:30 mins, constant inversions for 1st 30 seconds then 2 inversion every minute. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|