| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
jun
 Registrado: 25 Ene 2011 Mensajes: 54 Ubicación: Philippines
|
 Publicado: Lun Jun 13, 2011 9:11 am Asunto: where to get screws? |
|
 Publicado: Lun Jun 13, 2011 9:11 am Asunto: where to get screws? |
|
|
jun wrote:
not looking to buy them but just asking what other items around the house would have small size screws?
sometimes i need just 1 or two screws to replace those flea size ones that go flying away.
a watch i would assume would have those types of screws. _________________ mc rokkor 58 f1.4, mc rokkor 135 f2.8, canon fd 50 f1.4, yashica ml 50 f1.9, sigma 80-200 f4, tokina 80-200 f4, sony nex 16mm f2.8, sony alpha 18-70 f3.5-5.6, pentax smc f 35-70mm f3.5-5.6, canon efs 18-55 f3.5-5.6, tokina 28 f2.8, canon fl 58 f1.2 |
|
| Volver arriba |
|
 |
Himself
 Registrado: 01 Mar 2007 Mensajes: 3315 Ubicación: Montreal
Expire: 2013-05-30
|
 Publicado: Lun Jun 13, 2011 11:59 am Asunto: |
|
 Publicado: Lun Jun 13, 2011 11:59 am Asunto: |
|
|
Himself wrote:
A watch won't do it, the screws are too small.
Look for an optician shop or buy a couple of $5 lenses and you'll have plenty of screws. _________________ Moderator Himself |
|
| Volver arriba |
|
 |
indianadinos
 Registrado: 06 Jul 2008 Mensajes: 1310 Ubicación: Toulouse, France
Expire: 2011-12-05
|
 Publicado: Lun Jun 13, 2011 12:28 pm Asunto: |
|
 Publicado: Lun Jun 13, 2011 12:28 pm Asunto: |
|
|
indianadinos wrote:
Hi,
Have you checked MicroTools ? _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Volver arriba |
|
 |
OM
 Registrado: 15 Ene 2010 Mensajes: 166 Ubicación: Southern England
|
 Publicado: Lun Jun 13, 2011 5:08 pm Asunto: |
|
 Publicado: Lun Jun 13, 2011 5:08 pm Asunto: |
|
|
OM wrote:
I bought a good-sized bag of assorted micro screws and bolts from a radio-control model dealer...worth a look there if you have one local. |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Jun 13, 2011 6:12 pm Asunto: |
|
 Publicado: Lun Jun 13, 2011 6:12 pm Asunto: |
|
|
Attila wrote:
| Himself escribió: |
A watch won't do it, the screws are too small.
Look for an optician shop or buy a couple of $5 lenses and you'll have plenty of screws. |
This is most inexpensive source to me also. |
|
| Volver arriba |
|
 |
jun
 Registrado: 25 Ene 2011 Mensajes: 54 Ubicación: Philippines
|
 Publicado: Mar Jun 14, 2011 7:02 am Asunto: too far |
|
 Publicado: Mar Jun 14, 2011 7:02 am Asunto: too far |
|
|
jun wrote:
Have you checked MicroTools ?
it is too far for me. shipping to asia is really expensive.
i just want a screw or bearing ball once in a while when i start tinkering with my lens. _________________ mc rokkor 58 f1.4, mc rokkor 135 f2.8, canon fd 50 f1.4, yashica ml 50 f1.9, sigma 80-200 f4, tokina 80-200 f4, sony nex 16mm f2.8, sony alpha 18-70 f3.5-5.6, pentax smc f 35-70mm f3.5-5.6, canon efs 18-55 f3.5-5.6, tokina 28 f2.8, canon fl 58 f1.2 |
|
| Volver arriba |
|
 |
indianadinos
 Registrado: 06 Jul 2008 Mensajes: 1310 Ubicación: Toulouse, France
Expire: 2011-12-05
|
 Publicado: Mar Jun 14, 2011 9:36 pm Asunto: Re: too far |
|
 Publicado: Mar Jun 14, 2011 9:36 pm Asunto: Re: too far |
|
|
indianadinos wrote:
| jun escribió: |
Have you checked MicroTools ?
it is too far for me. shipping to asia is really expensive.
i just want a screw or bearing ball once in a while when i start tinkering with my lens. |
Then, just look for broken lenses/cameras sold as spares/repair near where you live ... But keep in mind that these screws don't have always the same threading ... _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|