MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

New system?
Ver tema anterior :: Ver tema siguiente  


Reply

So here is the thing.
Now I've been quite immersed in shooting 120 lately. Primarily 6x6 but also 6x9.
The Rolleiflex and Yashicamats have been perfect for shooting 6x6 normals.
All my 6x9 has been and looks like will be with a Fujica GW690iii.
The Fuji has a f3.5/90mm. The TLR's have an 80mm and 75mm.
I want a longer lens at times. Should I take a P6 and 180 Sonnar ?
I'm not interested in any wides or using a reflex for anything other than the "Portrait" lens.
It will be a one lens body for Portraits and close work only.
The hassie is interesting but I don't like changeable backs much and would enjoy that extra stop in the VF and occasionally for DOF play.
As well the Hassie 180 is quite spendy.
SLR's have really not been my cup for a few years now.
I think for a Portrait/close up kit it may be the way to go.
What is the deal with frame spacing problems on the P6?
Is it truly resolvable or forever a nagging issue.
Who should I buy a nice one from.
Any suggestions or experiences? Any for sale or trade from Members?


Reply

F16SUNSHINE escribió:
Should I take a P6 and 180 Sonnar ?


It's not an easy camera at all. In other words, it's not the camera you put in the bag and take out and use in an eyeblink, like you do with the rangefinders or even with the Rollei TLRs.
To begin with, it's heavy. Really heavy. The mechanics feel spartan at best. To hold a P6 with a Sonnar 180 mounted on it borders the undoable - i.e. if you don't take out the tripod in the moment you start using it, 99% chances are that you will take it out within the following 5 minutes. The pay back? Well, the images are gorgeous.

F16SUNSHINE escribió:
What is the deal with frame spacing problems on the P6?
Is it truly resolvable or forever a nagging issue.


If you are not careful loading the film, 99% you will have the frame overlap problem. The good news is, there is a video out on the net, which shows how to load the camera right. It is very well explained and easy to follow. Based on my experience, if you follow the video's steps, the percentage is inverted, that is, 99% of the time you will not have the frame overlap problem.
So this comes again back to the mentioned point: the P6 is not a camera that you use with your mind free and enjoying the company of your friends and so on: it requires dedication.

F16SUNSHINE escribió:
Who should I buy a nice one from.


Well... me Laughing
I know someday I'll regret it, but I need to narrow down my tools. With all the stuff that I have, I simply ended up not using the P6 in the last couple of years. Which is a nonsense. I used to have two. I sold one, but I guess that now it's time to sell the other one, too.
I also have two copies of the Sonnar 180 Jena, both multicoated version. One works perfectly but has a little ding on the filter ring. It can still mount filters but not as easily as it ideally should. The other one has a perfect filter ring but the aperture is stuck - I need to take it to a repairman to fix it.
Optically, they are both perfect (except perhaps some very few little dust inside, as it can always be found in P6 lenses due largely I think to the fact that no one seems to have rear caps for them).
One of the Sonnars will stay with me (because it's to good a lens not to keep a copy), the other one is for sale.

By the way, I think I will sell also most of the other P6 lenses that I have. The Biometar 120 has already gone. I will also sell the MIR 45mm, the Biometar 80mm, and the Jupiter 250mm, which I already have for sale on the marketplace here. I will only keep the Flektogon 50mm, Mir 65mm, and Kaleinar 150mm.


Reply

There are quite a few 6x7, 6x6 and 4.5x6 SLR's out there. Its not just P6 and Hasselblad.

I met a gent a few weeks ago who had a Mamiya RB67 kit. Very sweet. I think you can get very close indeed with this thing without any expensive extras.

And pretty darn cheap too, considering.

There are no 180 Sonnars for that, though I wouldn't be surprised if someone has made an adapter. - modify that ! I am getting old. The RB67 lenses have shutters, it would be an interesting job getting a Sonnar adapted!


Reply

I guess I don't understand why you don't care for interchangeable backs, but so be it. If I were in your position, the camera that would be on the top of my list would be the Pentax 6x7 -- the second model, the one with mirror lock up. No interchangeable backs. Pentax made a 200mm f/4 for that camera that sells for a fairly reasonable sum on the used market, plus later versions of the lens generally get good marks. They also made a 150mm f/2.8, which is at least close in terms of focal length and lens speed as the 180/2.8.

Reliability is seldom an issue with the Pentax 6x7.


Reply

I think first to decide is image FORMAT. I assume you prefer 6x6 as you´re talking about P6. Why don´t you like changing backs? I don´t think there is any negative; but there´s an important positive - you may shoot 2types (or more:) ) of film at a time, with one camera. P6 is great camera, sure, but it´s not as reliable as western cameras.

If you´re not looking for the cheapest solution, i´d also put in choice a Bronica - whether mechanical S2A/electronic EC-TL (which take P6 lenses with adapter) or newer SQ line, that´s your choice. I have had Bronica SQ-B together with gorgeous 180mm/f4.5 lens, which was really great combo for portraits. Also some of my friends have the old ones and can´t complain about anything.

Discarding Hasselblad is wise - except the newest bodies, there may be many problems with reliability and servicing is expensive. Also any lens except basic 80mm will cost you load of money.

Think about it.)


Reply

If I were you,. I would not use a P'six. I used that system with a few cameras years ago. Never had serious problems with overlapping, but I had problems with the flatness of the film. Camera on a tripod, same setting for 5 or 6 shots token within 20 minutes. Some tack sharp, some not. ?????? That was strange. Later I spent a roll of film watching it's behaviour with open shutter and measured the hights of the bumps, the film developed in the middle of the frame and knew, why some shots were off. Tried with two cameras (both from the last six production run). Sold all my six cameras! But kept some lenses, which are really good.

Klaus


Reply

If you like the Fuji, these were also made with interchangeable lenses, a (rare and not cheap) 180mm among them.


Reply

exaklaus escribió:
Camera on a tripod, same setting for 5 or 6 shots token within 20 minutes. Some tack sharp, some not. ?????? That was strange.


Was the film stored in a humid place and not tightly sealed? Or used shortly out of the fridge? I have found that the 120 film needs to be taken out the cardboard box and wrapped tightly in food plastic sheet in order for the refrigerator humidity not to imbue the paper. It is not enough to put the cardboard box inside a plastic bag like I firstly used to do.
Also one needs to take out the film from the fridge the evening before the shooting day, and let it get back to ambient temperature slowly.
I photographed several rolls with my P6es and I never noticed a film flatness problem. Of course, if the film comes into the camera curved due to problematic storage, there is no camera in the world (except for the void pressure cameras like the RXIII or the 645 Contax) that can make it flat.


Reply

I think I have three suggestions.

First, this is the perfect camera, exactly to your specification:

Tele-Rollei 1960 by Nesster, on Flickr


Realising that's a bit of a spend, however... I have the P645/150mm combination which is truly excellent - main problem is I wish the dang thing would focus a smidge closer. Very good lens. I think the auto focus one is a 2.8, the mf one I have is 3.5.


Third, listen to everyone else's suggetions! Laughing


Reply

Tele-Rollei, that is cool ! Smile


Reply

Orio escribió:
exaklaus escribió:
Camera on a tripod, same setting for 5 or 6 shots token within 20 minutes. Some tack sharp, some not. ?????? That was strange.


Was the film stored in a humid place and not tightly sealed? Or used shortly out of the fridge? I have found that the 120 film needs to be taken out the cardboard box and wrapped tightly in food plastic sheet in order for the refrigerator humidity not to imbue the paper. It is not enough to put the cardboard box inside a plastic bag like I firstly used to do.
Also one needs to take out the film from the fridge the evening before the shooting day, and let it get back to ambient temperature slowly.
I photographed several rolls with my P6es and I never noticed a film flatness problem. Of course, if the film comes into the camera curved due to problematic storage, there is no camera in the world (except for the void pressure cameras like the RXIII or the 645 Contax) that can make it flat.


No, was fresh Ilford FP4 or HP5, can't recall right now. Nothing from the fridge.
Anyway, the bad film flatness of the P'six is well-known. At least over here in Germany.
Crappy camera, great lenses. That are my experiences.
Klaus


Reply

I've always loved the P6 but I have to admit it is a bit of an irrational obsession and I still get problems with them no matter what I do.

I think you might consider a Mamiya C-series camera. You get a TLR with interchangable lenses and some - like the c220 - are cheaper than a P6 and 180 Sonnar. There is a 180 for the Mamiyas, too (I've no idea about image quality but surely it must be decent for a system like this) http://medfmt.8k.com/mf/mamiyaclens.html


Reply

exaklaus escribió:

Anyway, the bad film flatness of the P'six is well-known. At least over here in Germany.


Klaus, perhaps it's a common problem, but it's not a plague that affects all P6s. My copy does not suffer from it. And judging from the following photo, which I "borrow" from this thread of Paul:
http://forum.mflenses.com/the-grand-canal-t35560.html#1101413



Paul's copy does not suffer from it either.
A camera that suffers from lack of film flatness does not take a picture like this one, where you can read fine details everywhere.
_


Reply

Guys thanks for all the info and suggestions. Sounds like the P6 would get the boot pretty quickly from me.
I wonder if the Sonnar 180 can be adapted to the Pentax 6x7 system?
I had a 67 MLU for quite some time. Great camera. Sounds like thunder when you fire it off. Not good Wink
I did not realize the Mamiya system had a 180.. I think that is my best option.
No mirror slap, leaf shutter silence, and a "camera down" waist level approach which is much less intrusive for subjects.
I see that KEH has a c220 bodies in top shape for $200 and the 180mm lens also for $200.
Seems high???

Anyone want a Fuji GW 670iii as a trade or outright? I have a spare.