MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Lower half of every frame black. Underexposed? Light leak?
Ver tema anterior :: Ver tema siguiente  


Reply

I just came back from the photo studio where I collected my photographs.

When still in store, I was quite shocked to see that one roll turned out quite different from what I imagined it to be.

To keep it short: The negatives themselves were blank with only the numbers stamped in at the bottom.

Meanwhile, the prints (of which there were only 10) were all out of focus (upper half) with the lower half tinted black (the bottom showed some blue lines, I seem to remember).

What did I (or possibly the developer?) do wrong? I don't know for sure (rolls were unmarked when I turned them in) which roll it was. But the look of one blurn out picture reminded me of my first roll, somehow.

Now I remember the following situation: When I first got that roll, my mother tried her hands on it and put it in the wrong way. Me, not realizing her mistake, shot a good 40 photos before realizing that something was awfully wrong. Then, when a friend of my mother came over (he's a self-proclaimed analogue photography expert), he removed the film, told me it wasn't exposed and turned it back in. Shot another 37 before I had to realize that he failed, as well. Laughing
That's when I put in the film myself (a first Wink) and got the camera to spin correctly.

Could it be, that the roll indeed suffered from all kinds of (double-) exposure? I simply can't imagine that a film input three times (no matter if right or wrong) would still work properly.

Also. Another roll, which was developed correctly, has some prints suffering from a huge blue shine/bar on the left of them. Is that some sort of flare from my Nikon E 50mm 1.8 or

And lastly. Is it possible to scan negatives using a standard flatbed scanner or a scanner/printer combo (my dad has one of the newer Samsung multis in his office).


Reply

It would be necessary for us to see the negative strips in their entirety to diagnose the problem: you can try photographing a typical afflicted strip through transmitted light, we need to see the edges as well.


Reply

I left them behind. Only took the second envelope with the photos that worked out.

So if you really need an actual photograph of the stripe*, I suppose I'm out of luck. Too bad then. Would've loved to know what I did wrong. Sad

As for the blue vertical lines in two of my photos. Will post the unaltered scans in a few.

Now how do I scan negatives though (would like to scan my working negatives, since those prints seem rather low quality)? Scanner is a Samsung CLX 3185.

*I checked that one before checking the prints, actually. They were all blanked out (some were transparent, while other parts were semi-transperent with nothing in them. Not even a single dot) with only the frame count stamped in.


EDIT: Link to them horrible blue bars

http://forum.mflenses.com/candc-kodak-gold-farbwelt-200-nikon-em-t41559.html


Reply

Cita:
To keep it short: The negatives themselves were blank with only the numbers stamped in at the bottom.


Same thing did happen with me twice , reason was always film wasn't transported. Loading was wrong, roll did stay in original position. So didn't get any light throw lens. I guess same thing did happen with you.


Reply

Cita:
And lastly. Is it possible to scan negatives using a standard flatbed scanner or a scanner/printer combo (my dad has one of the newer Samsung multis in his office).


NO. Require film holder and light in scanner top to light throw negative. Until you don't have own scanner with film adapter , better to ask lab to scan strips.


Reply

Attila escribió:
Cita:
To keep it short: The negatives themselves were blank with only the numbers stamped in at the bottom.


Same thing did happen with me twice , reason was always film wasn't transported. Loading was wrong, roll did stay in original position. So didn't get any light throw lens. I guess same thing did happen with you.


Don't think so.

If the film wasn't transported, they wouldn't even have half of every frame but only one hugely overexposed frame, wouldn't they?

Cita:

NO. Require film holder and light in scanner top to light throw negative. Until you don't have own scanner with film adapter , better to ask lab to scan strips.


Any cheap (100-200 euros), half decent film/negative scanner you would recommend then? Really don't want to dump any more money than necessary.


Reply

I have an Epson V500 it is fit into budget especially if you buy a second hand item.


Reply

Thanks.

I thought about buying one of those small film scanners. But that V500 is probably a more solid choice, as far as quality is concerned.


Reply

Blinx123 escribió:
Thanks.

I thought about buying one of those small film scanners. But that V500 is probably a more solid choice, as far as quality is concerned.


Dedicated film scanners are expensive usually, if not, their quality is not bettern than Epson V500 and with V500 you able to scan medium format films too whic are provide far better quality than scanned 35mm.


Reply

Thanks again.

Some of the shots on Flickr scanned with the Epson V500 looked gorgeous. Will most likely buy the newer V600 then.

Just one additional question, if you please: Is there some sort of wet mount available or would the Epson Z fluid mount fit the Epson V500/V600, as well?


Reply

Blinx123 escribió:
Thanks again.

Some of the shots on Flickr scanned with the Epson V500 looked gorgeous. Will most likely buy the newer V600 then.

Just one additional question, if you please: Is there some sort of wet mount available or would the Epson Z fluid mount fit the Epson V500/V600, as well?


I don't think so , this is a budget level scanner.


Reply

Ok. Checked back with some vendors today.

Apparently, there exist 3rd party fluid mounts for that Epson V600.

Quality from some of the photos I found on flickr is stellar, so I'll go for it.

BTW: Have you ever posted animal shots (preferably close ups) here that you scanned with that V500 of yours? I honestly couldn't care less for dull architecture (that's just me, of course. No offense. Your shots still look striking), but the shots of that tiger you posted some time ago looked astounding.


Reply

Blinx123 escribió:
Ok. Checked back with some vendors today.

Apparently, there exist 3rd party fluid mounts for that Epson V600.

Quality from some of the photos I found on flickr is stellar, so I'll go for it.

BTW: Have you ever posted animal shots (preferably close ups) here that you scanned with that V500 of yours? I honestly couldn't care less for dull architecture (that's just me, of course. No offense. Your shots still look striking), but the shots of that tiger you posted some time ago looked astounding.


I didn't shoot any animal portrait with film cameras.


Reply

I use a macro lens for digitalisation of B/W negatives and dias. Works very good for 35mm film. Never tested it with medium format, because my light panel isn't large enough.


Original size: http://www.flickr.com/photos/54671350@N02/5967134499/sizes/o/in/set-72157626948011291/

Any sharp 50mm lens with good contrast and low flaring and a bellows should do the same as a macro.


With a V500 quality would be better I guess. But much slower.

I have an Epson Perfection 1200 Photoscanner which is crap against to my method