| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
pirius
 Registrado: 28 Mayo 2009 Mensajes: 133 Ubicación: SoFla
|
 Publicado: Lun Dic 13, 2010 7:33 pm Asunto: Disassembling Meyer-Optik Primoplan 58/1.9 |
|
 Publicado: Lun Dic 13, 2010 7:33 pm Asunto: Disassembling Meyer-Optik Primoplan 58/1.9 |
|
|
pirius wrote:
I am trying to clean the internal glass on a newly acquired Primoplan 58/1.9 and I am having problems with disassembling the front part of it. It seems pretty straightforward at first but I can't figure out how to remove the front nameplate. Any ideas? Thanks... |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Dic 13, 2010 7:44 pm Asunto: |
|
 Publicado: Lun Dic 13, 2010 7:44 pm Asunto: |
|
|
Attila wrote:
Haz clic aquí para verlo en eBay
You need this tool or sink stopper (plug) what has exact diameter and made from hard gum. |
|
| Volver arriba |
|
 |
pirius
 Registrado: 28 Mayo 2009 Mensajes: 133 Ubicación: SoFla
|
 Publicado: Lun Dic 13, 2010 9:12 pm Asunto: |
|
 Publicado: Lun Dic 13, 2010 9:12 pm Asunto: |
|
|
pirius wrote:
Yeah, that's the one thing that I still don't have. However, I look at the nameplate ring (it is actually a large conical part like in many macro lenses) and it looks like that thread on the filter ring above it is narrower and won't let the ring to come off. I guess it's just an optical illusion  |
|
| Volver arriba |
|
 |
pirius
 Registrado: 28 Mayo 2009 Mensajes: 133 Ubicación: SoFla
|
 Publicado: Mar Dic 14, 2010 5:27 am Asunto: |
|
 Publicado: Mar Dic 14, 2010 5:27 am Asunto: |
|
|
pirius wrote:
Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. The rear optical assembly can also be easily removed with a lens wrench so the diaphragm becomes accessible from both sides. |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mar Dic 14, 2010 1:29 pm Asunto: |
|
 Publicado: Mar Dic 14, 2010 1:29 pm Asunto: |
|
|
Attila wrote:
| pirius escribió: |
| Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. The rear optical assembly can also be easily removed with a lens wrench so the diaphragm becomes accessible from both sides. |
It would be nice if you take photos from each steps and publish it here, I think some people will happy to read it and use it when need it. Many thanks in advance! |
|
| Volver arriba |
|
 |
pirius
 Registrado: 28 Mayo 2009 Mensajes: 133 Ubicación: SoFla
|
 Publicado: Mar Dic 14, 2010 2:20 pm Asunto: |
|
 Publicado: Mar Dic 14, 2010 2:20 pm Asunto: |
|
|
pirius wrote:
Sorry, I have already assembled it back. But it's easy, there is not much to show. If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench.
So the rubber tool was not necessary, but I have ordered it anyway
BTW, I've tried the lens and I think it's awesome! |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mar Dic 14, 2010 2:41 pm Asunto: |
|
 Publicado: Mar Dic 14, 2010 2:41 pm Asunto: |
|
|
Attila wrote:
| pirius escribió: |
Sorry, I have already assembled it back. But it's easy, there is not much to show. If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench.
So the rubber tool was not necessary, but I have ordered it anyway
BTW, I've tried the lens and I think it's awesome! |
No problem, rubber tool is useful. I like this lens too pretty much, congrats for your new tool.
Try to hunting down Helioplan 40mm or 4cm from Meyer it has even better IQ  |
|
| Volver arriba |
|
 |
valjo
 Registrado: 10 Oct 2008 Mensajes: 68 Ubicación: Bulgaria
|
 Publicado: Sáb Abr 19, 2014 5:13 pm Asunto: |
|
 Publicado: Sáb Abr 19, 2014 5:13 pm Asunto: |
|
|
valjo wrote:
| pirius escribió: |
| Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. |
| pirius escribió: |
| ... If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench. |
I have removed the small retaining screw on the inner side of the front ring but the front part can NOT be unscrewed. I have tried to unscrew it counter-clockwise firmly as i can.
My intention is to clean the diaphragm from excessively oiling.
What to do?
 _________________ Canon D60
3.5/135 Jupiter 37A |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|