| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
jazzokh1
Registrado: 25 Nov 2010 Mensajes: 2 Ubicación: PK
|
 Publicado: Jue Nov 25, 2010 5:03 pm Asunto: Jupiter-9 2/85mm Disassembly |
|
 Publicado: Jue Nov 25, 2010 5:03 pm Asunto: Jupiter-9 2/85mm Disassembly |
|
|
jazzokh1 wrote:
Hi,
Has anyone tried to disassemble a Jupiter-9 85mm f/2 lens? Serial No. 8910610. Googled and found the disassembly procedure for an older Kiev lens but not for this one.
It doesn't have a mounting ring. The M42 mount is milled directly to the barrel.
Any help would be appreciated. At least tell me where to start. Ive tried twisting the front element ring, but i fear it may not be like the kiev jupiter9 and id end up breaking something.
Thanks in advance!   |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Jue Nov 25, 2010 5:15 pm Asunto: Re: Jupiter-9 2/85mm Disassembly |
|
 Publicado: Jue Nov 25, 2010 5:15 pm Asunto: Re: Jupiter-9 2/85mm Disassembly |
|
|
Attila wrote:
| jazzokh1 escribió: |
Hi,
Has anyone tried to disassemble a Jupiter-9 85mm f/2 lens? Serial No. 8910610. Googled and found the disassembly procedure for an older Kiev lens but not for this one.
It doesn't have a mounting ring. The M42 mount is milled directly to the barrel.
Any help would be appreciated. At least tell me where to start. Ive tried twisting the front element ring, but i fear it may not be like the kiev jupiter9 and id end up breaking something.
Thanks in advance!   |
|
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Jue Nov 25, 2010 5:16 pm Asunto: |
|
 Publicado: Jue Nov 25, 2010 5:16 pm Asunto: |
|
|
Attila wrote:
You can start to disassembly from front also you can find small screw on barrel. |
|
| Volver arriba |
|
 |
sichko
 Registrado: 20 Jun 2008 Mensajes: 2475 Ubicación: South West UK
|
 Publicado: Jue Nov 25, 2010 5:45 pm Asunto: |
|
 Publicado: Jue Nov 25, 2010 5:45 pm Asunto: |
|
|
sichko wrote:
I've cleaned one exactly like this. I didn't remove any glass but simply cleaned the moving parts.
The optical block, complete with aperture ring and stop down ring, unscrews as a block from the base/mount/focusing unit. The aperture ring and stop down ring can then be removed from the optical block and cleaned.
The focus ring is held on by 3 screws. You can see one of them near the 1,7 on the distance scale. This reveals the focusing helicoid. I didn't dismantle this part but cleaned it and regreased it while assembled. _________________ John |
|
| Volver arriba |
|
 |
jazzokh1
Registrado: 25 Nov 2010 Mensajes: 2 Ubicación: PK
|
 Publicado: Sáb Nov 27, 2010 1:55 pm Asunto: What is the next step? |
|
 Publicado: Sáb Nov 27, 2010 1:55 pm Asunto: What is the next step? |
|
|
jazzokh1 wrote:
@ sichko. got the focusing ring off and twisted the rign to which it was attached. I can now see the helicoid full of axle grease.
If i remove the three screws from the aperture ring. would it release optical block from the helicoid? |
|
| Volver arriba |
|
 |
sichko
 Registrado: 20 Jun 2008 Mensajes: 2475 Ubicación: South West UK
|
 Publicado: Sáb Nov 27, 2010 5:45 pm Asunto: |
|
 Publicado: Sáb Nov 27, 2010 5:45 pm Asunto: |
|
|
sichko wrote:
The optical block simply unscrews from the focussing assembly. You don't need to remove the screws on the aperture ring - unless your lens is completely different to mine. The optical block will come away with both aperture ring and stop down ring. If you want to remove them for cleaning/regreasing then it's fairly intuitive. But if you need any further advice let me know. When you do remove the optical block - be careful. There may be one or more spacer rings which might be quite thin and easily bent. _________________ John |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|