MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

How to replace missing red lens 4 film exposure number?
Ver tema anterior :: Ver tema siguiente  


Reply

I recently purchased a Minolta II folder with two main items I wish to repair.

The leather(ette?) is about 40% missing. This is a simple fix as I have leatherette left over from another craft project.

The second problem is the red lens (for lack of a better word) through which you see the exposure number on the film back is missing. Is there a source for replacement material or a tip on what can be used in its place? I was thinking of perhaps cutting a piece off an old red glass filter.


Reply

Red glass filters might not be 100% blocking (though that will not matter any more, there is no more 120 ortho film), and they are generally glass, which is hard to cut into odd shapes. Red ENLARGER filters will do nicely - and are acrylic or polycarbonate on all enlargers (except for highest end pro gear or historic items).

At a pinch I could mail you a few inches of red print shop masking tape (essentially darkroom filter made into adhesive film) - if you sandwich that with clear acrylic it will have the same effect.


Reply

I've seen people recommend red plastic report covers you can get at an office supply store.