| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Vie Oct 15, 2010 3:08 pm Asunto: Tair 3 4.5/ 300mm lens, infinity adjustment |
|
 Publicado: Vie Oct 15, 2010 3:08 pm Asunto: Tair 3 4.5/ 300mm lens, infinity adjustment |
|
|
Abbadon wrote:
Hi,
I have recently acquired a tair 3 300mm telephoto lens, which appears to be on good working order. I have however the need to tweak the infinity focus setting.
I have noted the strip down guide someone has posted for this lens, butbeing a lens noon I'm not able to work out from that which bits I need to strip off to allow focus adjustments!
Any help is very much appreciated!
Andy B |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Vie Oct 15, 2010 3:12 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 3:12 pm Asunto: |
|
|
Attila wrote:
Welcome Andy! Hopefully somebody will able to help. |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Vie Oct 15, 2010 4:44 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 4:44 pm Asunto: |
|
|
Abbadon wrote:
Attila,
I hope so too, thanks for you welcome
is this thread in the correct sub-forum, i wasn't sure?
Andy |
|
| Volver arriba |
|
 |
std
 Registrado: 09 Feb 2010 Mensajes: 1826 Ubicación: Bulgaria
|
 Publicado: Vie Oct 15, 2010 5:41 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 5:41 pm Asunto: |
|
|
std wrote:
The front block unscrews as i remember.
I had on mine the metal front cap jammed when i got it.
Tried to unscrew the lens cap but instead the front block got unscrewed and i ended up cutting it.
Also there were some small screws visible when you focus to the long end. |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Vie Oct 15, 2010 5:45 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 5:45 pm Asunto: |
|
|
Attila wrote:
| Abbadon escribió: |
Attila,
I hope so too, thanks for you welcome
is this thread in the correct sub-forum, i wasn't sure?
Andy |
No problem I did move here , this is correct place for your post. |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Vie Oct 15, 2010 6:14 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 6:14 pm Asunto: |
|
|
Abbadon wrote:
Std,
do you have pictures of the things you refer to to assist me?
would be very helpful
Andy |
|
| Volver arriba |
|
 |
std
 Registrado: 09 Feb 2010 Mensajes: 1826 Ubicación: Bulgaria
|
 Publicado: Vie Oct 15, 2010 6:24 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 6:24 pm Asunto: |
|
|
std wrote:
Hi Andy
unfortunately i don't have this lens any more. There were instructions on the web about it somewhere.
What's yourslooks like? the old one for Kiev or the new one?
BR,
Stefan |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Vie Oct 15, 2010 8:59 pm Asunto: |
|
 Publicado: Vie Oct 15, 2010 8:59 pm Asunto: |
|
|
Abbadon wrote:
It is this one:
http://forum.mflenses.com/tair-3-4-5-300a-t13094.html |
|
| Volver arriba |
|
 |
xjjohnno
 Registrado: 07 Abr 2009 Mensajes: 1270 Ubicación: Melbourne Australia
Expire: 2011-11-18
|
 Publicado: Sáb Oct 16, 2010 10:53 am Asunto: |
|
 Publicado: Sáb Oct 16, 2010 10:53 am Asunto: |
|
|
xjjohnno wrote:
Hi Andy, I take it that the Nikon mount adapter has arrived? Have you tried using the lens yet with the changed mount to see if adjusting is required? |
|
| Volver arriba |
|
 |
tomasg
 Registrado: 01 Nov 2009 Mensajes: 1135
Expire: 2014-04-28
|
 Publicado: Sáb Oct 16, 2010 3:55 pm Asunto: |
|
 Publicado: Sáb Oct 16, 2010 3:55 pm Asunto: |
|
|
tomasg wrote:
hello
i recently adapted to infinity my Tair 11a, a 135/f2.8, lens, of course they are not the same lens, but if the focusing mechanism is the same, as it s the same for a helios 44-2, you can probably do it the same way, it requires shaving off a bit some parts , so the modification is not that easy. If you are intrested i can make some pictures of how i did it.
tomas |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Dom Oct 17, 2010 3:48 pm Asunto: |
|
 Publicado: Dom Oct 17, 2010 3:48 pm Asunto: |
|
|
Abbadon wrote:
Hi, no the new Russian sourced nikon mount bit hasn't turned up yet. I could, in theory do a lash up trial using the nikon half of the t2 type mount that I already have, just need some longer screws to allow me to wind them in far enough to grab the undersized lens stub. I would like to discover the technique for this lens adjustment as I suspect I may well still need it, based on the fact the nikon mount will be approx same is the m42 one there at the moment, and as such, will prob still not quite reach infinity on my mount. This may of course not be true if it overshoots infinity on an m42 camera... But I can't check that! I could bung it on my dads old minolta 35mm camera but I dont know where my mum has stored it
Andy B |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Mié Oct 20, 2010 6:24 pm Asunto: |
|
 Publicado: Mié Oct 20, 2010 6:24 pm Asunto: |
|
|
Abbadon wrote:
ok, update.
the genuine Russian adaptor turned up, and it was the correct diameter exactly, and also shorter, but we don't quite reach infinity still - its definitely closer but is definitely not at infinity.
Can anyone help me get in to the right part of this lens to adjust it?
cheers
Andy |
|
| Volver arriba |
|
 |
Pancolart
 Registrado: 04 Feb 2008 Mensajes: 3710 Ubicación: Slovenia, EU
Expire: 2013-11-18
|
 Publicado: Jue Oct 28, 2010 7:03 am Asunto: Tair repair service disassemble |
|
 Publicado: Jue Oct 28, 2010 7:03 am Asunto: Tair repair service disassemble |
|
|
Pancolart wrote:
Moved to: http://forum.mflenses.com/viewtopic,p,1092174.html#1092174 _________________ ---------------------------------
The Peculiar Apparatus Of Victorian Steampunk Photography: 100+ Genuine Steampunk Camera Designs https://www.amazon.com/dp/B0B92829NS
Editado por última vez por Pancolart el Sáb Dic 04, 2010 1:45 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Jue Oct 28, 2010 9:27 am Asunto: |
|
 Publicado: Jue Oct 28, 2010 9:27 am Asunto: |
|
|
Abbadon wrote:
Unfortunately I have the A version of the lens which is a more conventional focusing and aperture stopping down mechanism, so I am unsure how applicable any of these comments are to my lens
Can anyone rationalise any similarities internally of the 2 lenses? I'm assuming there must be some similarities?
Does no one have any experience with the A type lens adjustment out there?
Andy |
|
| Volver arriba |
|
 |
Pancolart
 Registrado: 04 Feb 2008 Mensajes: 3710 Ubicación: Slovenia, EU
Expire: 2013-11-18
|
 Publicado: Jue Oct 28, 2010 11:35 am Asunto: |
|
 Publicado: Jue Oct 28, 2010 11:35 am Asunto: |
|
|
Pancolart wrote:
Can you show me your version? _________________ ---------------------------------
The Peculiar Apparatus Of Victorian Steampunk Photography: 100+ Genuine Steampunk Camera Designs https://www.amazon.com/dp/B0B92829NS |
|
| Volver arriba |
|
 |
Abbadon
Registrado: 15 Oct 2010 Mensajes: 8
|
 Publicado: Jue Oct 28, 2010 12:18 pm Asunto: |
|
 Publicado: Jue Oct 28, 2010 12:18 pm Asunto: |
|
|
Abbadon wrote:
Its this one :
http://forum.mflenses.com/tair-3-4-5-300a-t13094.html
I haven't opened her up yet as I wanted to know where I was looking, I have never opened up a lens before so you can understand my trepidation and I don't want to end up with sections pulled apart that I don't need to touch!
I can take more pictures of it this evening if required?
Andy |
|
| Volver arriba |
|
 |
Pancolart
 Registrado: 04 Feb 2008 Mensajes: 3710 Ubicación: Slovenia, EU
Expire: 2013-11-18
|
 Publicado: Jue Oct 28, 2010 8:42 pm Asunto: |
|
 Publicado: Jue Oct 28, 2010 8:42 pm Asunto: |
|
|
Pancolart wrote:
Sorry i guess different construction. _________________ ---------------------------------
The Peculiar Apparatus Of Victorian Steampunk Photography: 100+ Genuine Steampunk Camera Designs https://www.amazon.com/dp/B0B92829NS |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|