MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Agfa Isolette-II Apotar 85mm
Ver tema anterior :: Ver tema siguiente  


Reply

Today I bought this camera, what should I expect from her ?
Any experience ?

See results here


Editado por última vez por Attila el Mié Ago 11, 2010 10:04 pm; editado 1 vez en total


Reply

Nice lens and body, frozen aperture and shutter and a decayed bellows.


Reply

Minolfan escribió:
Nice lens and body, frozen aperture and shutter and a decayed bellows.


Laughing


Reply

Attila escribió:
Minolfan escribió:
Nice lens and body, frozen aperture and shutter and a decayed bellows.


Laughing


My copy has looks fine below and shutter not works only at slow speeds. I will try to check it out first both, thanks!


Reply

Congrats, Attila, Apotar lens is not half-bad at all:





From Agfa Isolette 4.5, Apotar, Compur Rapid Shutter (to 1/500sec).


Reply

Shocked Wow! YES!


Reply

If your shutter works a bit you will get it OK with lighter fluid and some patience. If the bellows is still tight (I didn't find one yet), you have a nice folder.


Reply

Minolfan escribió:
If your shutter works a bit you will get it OK with lighter fluid and some patience. If the bellows is still tight (I didn't find one yet), you have a nice folder.

Bang ! You didn't find yet sound not so good...


Reply

Just check your bellows Attila, You might have more luck than I had (four copies, four more or less decayed bellows). The last folders Agfa made seems to have a better quality material for the bellows.
I tried to get a replacement bellows without succes and didn't yet a serious attempt to make one myself.


Reply

Isolette bellows are notoriously bad apart from some very early models and late ones like the super.
You can 'borrow' bellows from similar cameras. A Kershaw 110 or an Agilux work well.


Reply

Xpres escribió:
Isolette bellows are notoriously bad apart from some very early models and late ones like the super.
You can 'borrow' bellows from similar cameras. A Kershaw 110 or an Agilux work well.


Thank you for tip!


Reply

Naturally I found one light leak on below Crying or Very sad


Reply

That is not bad, a single leak is not too difficult to repair, at least for temperory.


Reply

Most of the times the bellows of an Isolette has to be replaced. Especially the shiny ones develop (many) lightleaks in the corners. As stated before the very early and the very late production didn't have that problem.

Good news is that it is quite easy to replace the bellows. There are still new bellows made for the Isolette by different sources.

You can see a set photos about removing the bellows here :


http://www.flickr.com/photos/29504544@N08/4387440419/in/set-72157622925629597/


Reply

Thank you !


Reply

See results here


Reply

The results are surely good looking. The Apotar is one of the better triplets which performs very well if stopped down a bit (diaphragma 8 or 11).

If you become a regular shooter with this Isolette i recommend putting new bellows on it.


Reply

hanskerensky escribió:
The results are surely good looking. The Apotar is one of the better triplets which performs very well if stopped down a bit (diaphragma 8 or 11).

If you become a regular shooter with this Isolette i recommend putting new bellows on it.


Yes, seems really best triplet , thanks!