MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Exakta to 4/3 adapter
Ver tema anterior :: Ver tema siguiente  


Reply

Hi, I would like to buy several lenses on eBay for using on my Olympus E420 with the "Topcon lens to 4/3 Four Thirds adapter" which seems to be available for around 40$ on eBay. I would like to know if this adapter will work with CZJ and Meyer lenses (Pancolar, Lydith, Oreston, etc.).

Furthermore, when buying a lens, do I have to care about technical precisions concerning "electric" on some lenses. I think it doesn't mean the lenses are auto-focus but maybe that some focus-confirm is available, am I wrong? Is it better to buy a lens with no "electric" label?

Best regards.


Reply

Welcome ! Nice to see you here!


baruchel escribió:
Hi, I would like to buy several lenses on eBay for using on my Olympus E420 with the "Topcon lens to 4/3 Four Thirds adapter" which seems to be available for around 40$ on eBay. I would like to know if this adapter will work with CZJ and Meyer lenses (Pancolar, Lydith, Oreston, etc.).


It will works with all lenses with Exakta mount include CZJ and Meyer lenses of course.
I know only two issues with these adapters.

1) Not works with Exakta-Pentacon Six adapter.
2) If lens focusing hard easy to over rotate lens without any prevention and risk lens safety (falling down)

Alex (hk300) made a prototype me what is fix above issues, but it has small screw fixing issue so never went to production.

So no better adapter available on market, take it. I suggest Jinfinace or Roxsen Ebay sellers.

baruchel escribió:

Furthermore, when buying a lens, do I have to care about technical precisions concerning "electric" on some lenses. I think it doesn't mean the lenses are auto-focus but maybe that some focus-confirm is available, am I wrong? Is it better to buy a lens with no "electric" label?
Best regards.


No, they are manual lenses fully, no AF. They have electrical contacts to TTL light meters on film camera bodies like Practica VLC series. No matter you take lens with electric or without electric contacts. Both works just fine with adapter on digital bodies.


Reply

Attila escribió:
2) If lens focusing hard easy to over rotate lens without any prevention and risk lens safety (falling down)


Thank you for your quick answer. Does this issue occur with all models? Do you know if I will encounter it with Meyer Lydith?

If I understand well, there is however no major issue as long as I use it with great care, isn't it? Is it a good choice to use praktica lenses or should I only look for M42 versions of the lenses (when available)? Since I have not started buying these lenses, would you tell me to rather look for other lenses with better adapters available? Regards.


Reply

baruchel escribió:
Attila escribió:
2) If lens focusing hard easy to over rotate lens without any prevention and risk lens safety (falling down)


Thank you for your quick answer. Does this issue occur with all models? Do you know if I will encounter it with Meyer Lydith?

If I understand well, there is however no major issue as long as I use it with great care, isn't it? Is it a good choice to use praktica lenses or should I only look for M42 versions of the lenses (when available)? Since I have not started buying these lenses, would you tell me to rather look for other lenses with better adapters available? Regards.


No major issue all Exakta lenses works perfect with this adapter just need to use it with care. Generally Exakta mount lenses are cheaper than M42 one.

With your camera you can use Nikon,Minolta MD, M42, Yashica/Contax,Olympus OM, Exakta , M39, Leica-R ,Tamron,Pentacon sic, etc lenses. All adapter are strong and prefect only Exakta has this little limitation.


Reply

What does your adapter looks like?
Does it have this locking lever?

Those are some pics from my exakta - micro 4/3 adapter.
All exakta lenses have this pin (next to the red dot) on the bayonet which locks the lens.


When you want to mount the lens you align the 2 red dots (on the adapter and on the lens)


and turn the lens clockwise until the white pin clicks to the lever.



If you want to unmount tle lens just press the lever and unlock it.

I never had any problems with lenses falling off or unlocking by themselves with this adapter.

Btw i'm selling some of them (including the lydith) here: http://forum.mflenses.com/fs-exakta-and-m42-lenses-for-sale-t29421.html

BR,
Stefan


PS this one should be ok for you looks exaktly as mine but thinner
Haz clic aquí para verlo en eBay