MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Pentax K to M42. I lost the spring!!
Ver tema anterior :: Ver tema siguiente  


Reply

Hello. I have lost the "spring" of my non original M42 to K mount adapter. Now the adapter keeps on rotation in the mount, without fixing. I think it could be easy to make another one from spring steel, but I would need the shape and dimension. Could anybody be so kind to post some image of the thing, ideally at 1:1 scale, so I can make a copy of it?.Thanks in advance.

Javier


Reply

From reading various blogs relating to non original M42 adaptors I understand it is generally recommended that you remove the spring. A number of instances of panic when the camera body and adaptor could not be separated.
Try tightening the lens a little more. Should not be a problem then with lens unscrewing.
bb2


Reply

beachboy2 escribió:

Try tightening the lens a little more. Should not be a problem then with lens unscrewing.
bb2


Thank you for your answer. The problem is the adapter must be fixed in a certain position to ensure that the aperture-following level in the body is pushed to the proper "wide-open" position. If you are not going to use the camera meter, this could be O.K though. If you tight the adapter a little more, the meter becomes useless. In my case I have tried to make a new spring, but I can not remember the exact shape. There is "something" in the spring that prevents the adapter to rotate CW past the position, which I have missed. That is why I wanted to "see" one. I have never had any problem to mount or dismount the adapter.

Javier