MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Need help - Canon FD 35-70 f2.8 focus issues
Ver tema anterior :: Ver tema siguiente  


Reply

Hi - I have just obtained (at zero cost!) a pristine Canon 35-70 f2.5 zoom lens. It will not retain focus through the zoom range and it will not focus out to infinity (actually only to about 30 feet). If I could just focus a bit more towards infinity, then it would come into play.

Is there any sort of adjustment that I could make to this lens to make it focus? I'm less concerned with it not holding focus through the zoom as I am about not being able to focus further out.

Shop that sold it to me (and then refunded me fully) told me to throw it in the garbage rather than return to them for fixing. Its just way to pretty to do that - can anyone give me some direction as to how I might be able to adjust it to make it a usable lens??

I just bought a pristine F-1n and it would look great hanging off of the front this summer in Italy!!


Reply

Welcome! Which camera body do you have ?


Reply

Hello.
Here is a thread discussing a similar problem: http://forum.mflenses.com/adjust-focus-of-canon-fd-35-105-f-3-5-zoom-lens-t27092.html.
Have a read and see if it is of any help. As far as I can remember your lens should be of the two touch variety, maybe is similar in construction to the one discussed there.

Cheers, M.-


Reply

I still have my first "real" camera - a black bodied AE-1 that I special ordered back in high school - about 1979 or 80 (I remember everyone in the store coming to look at the black version - couldn't afford the A-1 at the time but wanted black). Bought a mint power winder off of *bay a year or two back and really enjoying it again. Also just purchased a New F-1 that quite literally doesn't have a mark on it. Not sure it has even seen a roll of film. Paid about 1/2 what the original AE-1 cost me!

I saw the other thread and was hoping there might be a similar solution. It is a two ring version, but the zoom ring has a macro switch built into it - not sure how I would get the rubber off of that to have a look without damaging it. The focus ring rubber is probably not so bad, but don't know where to look for any adjustment screws for sure.

Appreciate any help that folks may be able to provide.