| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
creativelies
Registrado: 14 Ago 2010 Mensajes: 4
|
 Publicado: Sáb Ago 14, 2010 3:24 am Asunto: Question regarding repairing Tessar 50mm f/2.8 - w/photos |
|
 Publicado: Sáb Ago 14, 2010 3:24 am Asunto: Question regarding repairing Tessar 50mm f/2.8 - w/photos |
|
|
creativelies wrote:
Hello all.
I recently purchased several MF lenses on eBay, one of which arrived with the focus ring firmly jammed. Having some small luck in the past repairing MF lenses I've given this one a shot... I am, however, now stuck.
I figure that the most likely culprit is old grease but either way I figured I'd have to disassemble down to beneath the focus ring to tell. The lens doesn't appear to be the same as other Tessar 50mm f/2.8's where there are disassembly guides - there are no screws on the rear mount and the focus ring has a leathery-looking plastic piece in place.
I can't seem to get the img tags to work so I'm linking photos
...oook. now the second half of the post has converted into a link going nowhere. Or is it just me?
The lens:
http://farm5.static.flickr.com/4080/4889376447_30d1153833_b.jpg
Rear:
http://farm5.static.flickr.com/4098/4889973098_42bc17da9d_b.jpg
How far I've gotten:
http://farm5.static.flickr.com/4081/4889377657_6d498a41c6_b.jpg
http://farm5.static.flickr.com/4094/4889971964_9934049407_b.jpg
Looking at http://rick_oleson.tripod.com/index-81.html... if the design is the same it seems that I need to remove one of the rings from the rear. Try as I might they won't budge, though.
So - any idea where to go from here?! The focus ring is firmly jammed at 0.8m though I can get it to go to MFD and back to 0.8 with a large amount of effort.
Any advice very much appreciated. _________________ http://codastudios.com.au |
|
| Volver arriba |
|
 |
sichko
 Registrado: 20 Jun 2008 Mensajes: 2475 Ubicación: South West UK
|
|
| Volver arriba |
|
 |
martyn_bannister
 Registrado: 23 Mayo 2010 Mensajes: 1151
|
 Publicado: Sáb Ago 14, 2010 6:51 am Asunto: |
|
 Publicado: Sáb Ago 14, 2010 6:51 am Asunto: |
|
|
martyn_bannister wrote:
Shot in the dark here, but does the rear section of the lens just unscrew? |
|
| Volver arriba |
|
 |
creativelies
Registrado: 14 Ago 2010 Mensajes: 4
|
 Publicado: Dom Ago 15, 2010 5:09 am Asunto: Re: Question regarding repairing Tessar 50mm f/2.8 - w/photo |
|
 Publicado: Dom Ago 15, 2010 5:09 am Asunto: Re: Question regarding repairing Tessar 50mm f/2.8 - w/photo |
|
|
creativelies wrote:
| sichko escribió: |
First posts are not allowed to contain links - spam prevention. Link is now OK- space needed after html. |
Ah, ok - thanks  _________________ http://codastudios.com.au |
|
| Volver arriba |
|
 |
creativelies
Registrado: 14 Ago 2010 Mensajes: 4
|
 Publicado: Dom Ago 15, 2010 5:10 am Asunto: |
|
 Publicado: Dom Ago 15, 2010 5:10 am Asunto: |
|
|
creativelies wrote:
| martyn_bannister escribió: |
| Shot in the dark here, but does the rear section of the lens just unscrew? |
Good idea - I gave it a shot by turning clockwise and no luck there... can't get enough purchase to try counter-clockwise with what I have. I tried some small round rubber pieces + pushing in quite hard but it still slipped.
No dice  _________________ http://codastudios.com.au |
|
| Volver arriba |
|
 |
martyn_bannister
 Registrado: 23 Mayo 2010 Mensajes: 1151
|
 Publicado: Dom Ago 15, 2010 6:29 am Asunto: |
|
 Publicado: Dom Ago 15, 2010 6:29 am Asunto: |
|
|
martyn_bannister wrote:
| creativelies escribió: |
| martyn_bannister escribió: |
| Shot in the dark here, but does the rear section of the lens just unscrew? |
Good idea - I gave it a shot by turning clockwise and no luck there... can't get enough purchase to try counter-clockwise with what I have. I tried some small round rubber pieces + pushing in quite hard but it still slipped.
No dice  |
Sorry, I should have said, I mean the outer part of the rear section. Can you just grab it in your hand and unscrew it counter-clockwise?[/b] |
|
| Volver arriba |
|
 |
creativelies
Registrado: 14 Ago 2010 Mensajes: 4
|
 Publicado: Dom Ago 15, 2010 11:43 am Asunto: |
|
 Publicado: Dom Ago 15, 2010 11:43 am Asunto: |
|
|
creativelies wrote:
| martyn_bannister escribió: |
| creativelies escribió: |
| martyn_bannister escribió: |
| Shot in the dark here, but does the rear section of the lens just unscrew? |
Good idea - I gave it a shot by turning clockwise and no luck there... can't get enough purchase to try counter-clockwise with what I have. I tried some small round rubber pieces + pushing in quite hard but it still slipped.
No dice  |
Sorry, I should have said, I mean the outer part of the rear section. Can you just grab it in your hand and unscrew it counter-clockwise?[/b] |
THANK YOU.
Sorted! Didn't think of twisting that part. The rear part is exposed now and it looks as though I should be able to get the rest of the way without too much trouble. Now I just have to find what on earth I did with my screwdrivers...
Thanks again  _________________ http://codastudios.com.au |
|
| Volver arriba |
|
 |
WolverineX
 Registrado: 19 Abr 2009 Mensajes: 1693 Ubicación: Zagreb , Croatia , Europe
|
 Publicado: Lun Ago 16, 2010 6:56 pm Asunto: |
|
 Publicado: Lun Ago 16, 2010 6:56 pm Asunto: |
|
|
WolverineX wrote:
http://forum.mflenses.com/how-to-tessar-disassembly-t30506.html
i posted a thread disassembling that kind of tessar, hope it helps _________________ my tools:Oly E-M5 + 45mm/1.8 + Oly E-520 + 12-60 + 14-42 + 70-300 + Sigma 105mm + FL-50R + EC20 + SRF-11 ring flash
http://forum.mflenses.com/wolverinex-testing-my-lenses-series-link-list-t39524.html |
|
| Volver arriba |
|
 |
martyn_bannister
 Registrado: 23 Mayo 2010 Mensajes: 1151
|
 Publicado: Mar Ago 17, 2010 6:11 am Asunto: |
|
 Publicado: Mar Ago 17, 2010 6:11 am Asunto: |
|
|
martyn_bannister wrote:
It was your thread I saw that led to my post. Thanks very much for sharing it. I couldn't find it again to give you credit, but do so now  |
|
| Volver arriba |
|
 |
WolverineX
 Registrado: 19 Abr 2009 Mensajes: 1693 Ubicación: Zagreb , Croatia , Europe
|
 Publicado: Mar Ago 17, 2010 5:42 pm Asunto: |
|
 Publicado: Mar Ago 17, 2010 5:42 pm Asunto: |
|
|
WolverineX wrote:
| martyn_bannister escribió: |
It was your thread I saw that led to my post. Thanks very much for sharing it. I couldn't find it again to give you credit, but do so now  |
thanx. i'm happy for my experience to help others, that's why i make threads in this section  _________________ my tools:Oly E-M5 + 45mm/1.8 + Oly E-520 + 12-60 + 14-42 + 70-300 + Sigma 105mm + FL-50R + EC20 + SRF-11 ring flash
http://forum.mflenses.com/wolverinex-testing-my-lenses-series-link-list-t39524.html |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|