MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

So much confused with the digital workflow
Ver tema anterior :: Ver tema siguiente  


Reply

Hi,
I wanted to share how still confusing a digital camera can be.
In the film times for example I would like to shoot lets say landscape and as an example I wanted to have focus from the tree over there to infinity.

I was able to look at the tree and calculate that this is at 3 meters. I was able to confirm that by focusing on the tree and then looking at the lens to see that 3m is written there.
Then based on the dof calculator printed on the lens I would be able to see how much aperture I need to have focus from three to infinity.
I was setting the aperture and boom the shot was sexy and ready

Then I pick up my digital camera, a sony nex with a legacy lens. I still see the tree and I focus there. I have no optical confirmation that it is indeed at 3 meters. Then I have to assume that is at 3 meters and my guess was correctly. I want from the tree to infinity in focus. Which aperture do I need now? There is nothing printed on the lens... Yes a DOF calculator would do the trick, only if my 3 meter guess was correctly.. but still I wonder why on a digital age I need a second device, like cell phone running a dof application to take such a shot?

Am I missing something here?

Regards
Alex


Reply

for the same focal length, use the same aperture. But if you are using crop sensor (APS or M4/3) one more stop will do it. There is no difference in reality, but as the sensor is smaller a greater magnification is needed to view it the same size as full frame. One extras stop should create circles of confusion correspondingly smaller.

I tried to make this as simple as I could.

there are DOF charts available online, or why not make your own from a calculator and print & laminate them. A card with the DOF tables for half a dozen lenses can be printed on both sides no bigger than a credit card.


Reply

Hi thanks
I just wonder what was the reason that digital cameras throwed this information out from their lenses

A.


Reply

"Dumbing down" is the term that comes into mind...

Actually, on 1.5x or 1.6x crop camera, close the aperture 1.5 or 1.6 stops to achieve the DOF shown (or not) on the lens.


Reply

btw if I have confused you.. with legacy lens I meant native lens... So a native nex lens does not have dof calculator, no aperture ring and no focus ring...


Reply

philslizzy escribió:
for the same focal length, use the same aperture. But if you are using crop sensor (APS or M4/3) one more stop will do it. There is no difference in reality, but as the sensor is smaller a greater magnification is needed to view it the same size as full frame. One extras stop should create circles of confusion correspondingly smaller..


same with what? I do not tend to remember what I do with my film camera, is just I see everytime the lens readings and I decide what I am doing... There are people that are saying that in the digital cameras shoot and review.. Well I tend to believe that reviewing in camera is not that good and still do not see the point who decided to throw the numbers printed on a lens. I see the point that the digital offer alternatives but still why loose one of the alternatives we had?


Reply

Canons have A-Dep mode but it's not very advanced. Still it's possible to half-press the shutter and use it to get aperture information.


Reply

just bang it down to f11 or f16 and you'll have plenty of DOF. If you want shallow leave it wide open. That's my rule of thumb and it works well enough. Just like sunny 16