MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Sample scan with ANR glass
Ver tema anterior :: Ver tema siguiente  


Reply

Just a quick sample scan I set up for those curious about scanning with anti newton rings glass.

Sorry for the dust ! Did not bother to clean Embarassed

Here a single 6x6 ANR glass like one that you can find in Gepe slide frames was simply placed over the film, to keep it flat:



The result as you can see is very sharp and there is no newton rings or other glass issues.
Heck even the dust is sharp! Laughing

The scanning was done manually without holders and without automatic recognition of the frames. I also adjusted the black and white points manually before scanning.

Scanner is Epson 4490 Photo. Film (colour negative) is super expired Agfa Optima.


Reply

Great detail, but then you scanned a 120 slide, and I would expect to see great detail from a 120 scan, even if you were using film holders. Even with my old Epson 3170 with film holder, I've been able to get great 120 scans.

What would be more illustrative to me would be to see a scan of the slide with holder, and one of the slide with the ANR glass, then 100% crops of both. It would be really interesting to see examples done with 35mm as well.


Reply

cooltouch escribió:

What would be more illustrative to me would be to see a scan of the slide with holder, and one of the slide with the ANR glass, then 100% crops of both. It would be really interesting to see examples done with 35mm as well.


Isn't that what you did before (135 film)? Only without the ANR glass then?

I don't see any newton rings in Orio's sample, so that is good.


Reply

Hey there!

Congratulations to those great results!

I am dying trying to get good scans with my Canon 8600f and am looking to get some ANR Glass or Third Company Film Holder with ANR Glass.

Could you please post some Pics of the Setup you used? I can't imagine how the Gepe slide frames work? Do you have to scan frame by frame or can you scan whole slides with it?

And the 100% crop Comparison with/without the Holder would be awesome!

Thanks alot in advance,

Jean-Marie - Germany...


Reply

eeyore_nl escribió:
cooltouch escribió:

What would be more illustrative to me would be to see a scan of the slide with holder, and one of the slide with the ANR glass, then 100% crops of both. It would be really interesting to see examples done with 35mm as well.


Isn't that what you did before (135 film)? Only without the ANR glass then?

I don't see any newton rings in Orio's sample, so that is good.


Yup. What I had done in a similar test was to see if I could determine the distance from the scanner glass for best sharpness. My tests indicated that laying the film directly onto the glass yielded slightly better sharpness, but then I got some newton rings. I don't have any ANR glass (yet).

Still, it's always nice to see independent confirmation, especially since Orio uses a different scanner than I do.


Reply

super detail. interesting techno stuff.