MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Tessar 50mm zebra
Ver tema anterior :: Ver tema siguiente  


Reply

Good evening everyone, I would like to illustrate how I managed to assemble the actuator's pin and its spring of the Carl Zeiss Jena Tessar 50mm f / 2.8 (Zebra) lens. For the CLA I followed various tutorials and videos. In fact, the greatest difficulty I encountered was to reposition the actuator pin and its spring. I loaded the elements and held them together with a food bag strap. I held up the movable hook with gummed paper. I then inserted the device into its housing and partially screwed in the screws. Then I gently extracted, after having shortened it, the clamp and I finally fully tightened the screws obtaining a good final result. I attach some photos. I hope it is useful to some of you.
cesare


Reply

Pics are here: http://forum.mflenses.com/tessar-50mm-zebra-pics-t83982.html