MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Viewfinder Magnifier
Ver tema anterior :: Ver tema siguiente  


Reply

Goodmorning ,
Since i m still using a couple of af lenses i dont want to change my focusing screen because i read that a mf `frienflier` screen might cause problems with them .
I found on e bay viewfinder magnifiers that magnify the center of the image 1.36 to 2.3.
Do you have any experience with them ?
Do they worth the trouble ?
I did a search on the forum and i cant say i found something .
Excuse my if i missed the topic .

Have a nice day ,

Panos .


Reply

most of these viewfinder magnifiers will crop the original view, you probably only see 80% or so of the original.


Reply

I purchased 2.3x and I totally do not suggest it... AF confirm chipped adapter is better solution...


Reply

Perhaps a solution like the Nikon DG-2 might be the best compromise. Gives a 2x magnification for critical focusing and flips up -thus getting out of the way- for full frame viewing/composition...


Reply

my Pentax x1.18 magnifier eyepiece always stays on the camera, I find it a useful aid for focusing. It does reduce the angle of view but only a little bit, just gives me a bit of room for cropping.
Because it crops the total view I would not want to use any bigger magnification though, but the flip up one SVP mentions must be great for some uses


Reply

panos escribió:
Goodmorning ,
Since i m still using a couple of af lenses i dont want to change my focusing screen because i read that a mf `frienflier` screen might cause problems with them .
I found on e bay viewfinder magnifiers that magnify the center of the image 1.36 to 2.3.
Do you have any experience with them ?
Do they worth the trouble ?


I have one, and it works, but the AF-adapters are more convenient, and give better results (for me).


Reply

kuuan escribió:
my Pentax x1.18 magnifier eyepiece always stays on the camera, I find it a useful aid for focusing. It does reduce the angle of view but only a little bit, just gives me a bit of room for cropping.
Because it crops the total view I would not want to use any bigger magnification though, but the flip up one SVP mentions must be great for some uses


+1

I have used a magnifier for my 350D and it made a big difference!
But this was also a 1.17 magnifier (by Nikon).


Reply

Hi,

I hope I can share my experience with you, and it will be helpful.

My eyes aren't too good with wider and slower lenses, and in low-light/contrast situations.

I probably have about 90% manual focus lenses, so you can imagine the frustrations I face.

I started out with a Seagull (Gen 2) angle finder. Lovely price, sharp image but tiring on the eye for extended use.

I switched to a Canon Angle finder C and have not looked back.

Meanwhile, there are times when I need a straight magnifier, so I looked around and got the ebay magnifiers. They work, but the image quality is quite bad and very tiring in the eyes.

If you can find some way to adapt a camera manufacturer (Nikon, Pentax, olympus etc) eyepiece magnifier to your camera, the trouble and price will be much more worth it (to help slow down eyesight degradation and make photography much more enjoyable!).

Or get a Canon angle finder C and a 3rd party split-image focusing screen, or the Canon Ef-s screen for your 40D.

I also use split and cross screens.

Perhaps I've not been fortunate enough to find really effective and reliable ones, but on the whole i found AF confirm chips less useful as there was too much room for error/poorer performance and inaccuracies with slower lenses.


Reply

If your dSLR is for APS-C size censor, try x1.36 or x1.22 view finder
magnifier offered at eBay. See> Haz clic aquí para verlo en eBay

I use for 350D, it is quite nicer than using Oly ME-1 for this camera.
Tenpa's mag is almost same construction as Nikon's DK-17M (x1.17),
and no visible distortion. The only problem is not too cheap....


Reply

Tharos escribió:
I purchased 2.3x and I totally do not suggest it... AF confirm chipped adapter is better solution...

+1 or split screen


Reply

I've been thinking about getting the Tenpa adapter for my 1.6x DSLR, but it won't solve the problem that exists with focusing fast lenses at apertures wider than f/4. Glad to read from Koji that its optical performance is good.


Reply

I've 5 chipped adapters. I can focus better by eye and even better with live view.


Reply

panos escribió:
Goodmorning ,
Since i m still using a couple of af lenses i dont want to change my focusing screen because i read that a mf `frienflier` screen might cause problems with them .


You may have my Pentax 1.3x VF enlarger for EUR 10,- plus shipping. It fits perfectly on a Canon DSLR. And it works, but I haven't used it recently, because I am happy with the AF-confirm adapters. I guess, for that price, you can safely try it out Smile

Btw, if you use glasses, you might find as well that the viewfinder enlarger has the disadvantage that your eyes are too far from the viewfinder to see the whole image. That is the main reason I don't use it very often. Plus; in practice, my AF-confirm adapters turn out to be precise enough.