MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Is there help for me?
Ver tema anterior :: Ver tema siguiente  


Reply




Hi ,

This is the front element of a Carl Zeiss Jena Pancolor 50mm f2 (its in a different case just so I could take a picture of it) . The olther elements from this lens, all cleaned well with very little effort, except this one . I have progressively started from vinegar, windex, cold creme and Naptha, denatured alcohol, vodka(just kidding), and went on from there to bathroom tile cleaner and something that removes bug tar from car windshield. Is this element doomed,should I find an alternative use for it- (the pattern is kind of exotic, maybe I can sell it in the gem market as a rare gem).
Is there hope for this? I have read all the wonderful fungi cleaning methods -and have used most that I can think of. I have been thinking of Acetone next-but I wanted to see what kind of advice and brain food I could get here.

Thanks, I hope the new year is going well for all


Reply

The problem with advanced stages of fungus is it can actually etch the glass as it eats the coating. If it appears the fungus has penetrated to the glass and marked it, I'm thinking that you probably shouldn't hold out much hope.

I haven't tried many of the more exotic remedies for getting rid of fungus, and I don't necessarily recommend that you do what I do, but what I've done with lenses to see if the fungus would come off was just rub the affected area real hard with my thumb. Wash your hands first if you try this, so you don't rub any traces of dirt that might be on your thumb into the glass. If I can remove the fungus just with my thumb, then I know I can get it off using more accepted means. But if it doesn't come off after a fair amount of rubbing, then I know there is little chance of it coming off using anything else.


Reply

Michael,

Ok, I'll try rubbing it with a clean thumb.
Granted the fungi has etched on the periphery as I see it , but the marbling and veining in the center -is the layer of coating coming off-it increased as I increased my intensity of treatment. I am curious what the best method to taking the coating off is- chemicals? , without killing the glass. I wouldnt find a coatless element. Would acetone take the coating off-at this point I am willing to take the old coat off.

Regards


Reply




I can see the imprint of spores, with tentacles like shapes. The power of fungus. You were right the fungus has etched the glass-and rubbing with my thumb makes no difference that I can see.


Reply

What about an experiment ...cut and polish like you use to buff a car scratch out with?? (I have no clue about these things but hey if you use this to see what works and what doesn't) sorry if I offend anyone with such a wild suggestion......would it work,could it work??


Reply

Mo-Fo escribió:
What about an experiment ...cut and polish like you use to buff a car scratch out with?? (I have no clue about these things but hey if you use this to see what works and what doesn't) sorry if I offend anyone with such a wild suggestion......would it work,could it work??


Well, why not? The lens is lost anyway. You can't make it any worse, but perhaps you can bring it back to live... kind of.


Reply

I have been thinking about some light metal polish. I will keep you posted. It would be nice to be able to clean it. At the present I am soaking it in some vinegar- I will leave it soaking overnight.

Youre both right-I am open to trying anything-at this time. The glass is not chipped , cracked or broken-but has some serious etching-almost like artwork.

Thanks


Reply

Hello there,
Before you try removing the coating, use some household ammonia cleaner (from memory about a 35% solution) to see if that will clear any fungus.

It is hard to tell from the photographs, but I fear that what you have may be the effects of low levels of mositure over a long time - that creates a situation that effectively dissolves the glass. See the paper at the Schott website http://www.schott.com/advanced_optics/english/download/tie-30_chemical_properties_of_optical_glass_v3.pdf which describes the effect (amongst others). If that is the problem, then trying to remove the coating doesn't work, since it is the glass structure itself which has failed. There can be some improvement from using a polish, such as liquid car polish, which can improve the transparency, but it will not be like new!.

Regards

Angus


Reply

Yes please keep us posted.....maybe a very light/fine wet dry sandpaper or would that be to abrasive?


Reply

Hi, years ago I tried using T-cut, which is used for paintwork on cars and is slightly abrasive - made the surface MUCH worse, but it was only a scrap lens anyway.
Recently I bought some cerium oxide on fleabay. Cerium oxide is specifically for polishing glass and is apparently the right material for the job.
A kit is cheap and includes a felt buffing wheel, either for an angle grinder or an electric drill - you have to choose, it doesn't fit both.
Aluminium oxide (powder, not sheets) is available in different grit sizes for removing deep scratches.
I should admit that I haven't used it yet so I'm no expert. YouTube has videos showing glass & lens polishing though. Keeping the lens moving on the wheel randomly seems to be the key, which is logical.
Wouldn't consider it for a valuable lens - expert services are available and some can also replace coatings - but for a lens which is otherwise useless I would try it.
If I ever advertised such a lens for sale I would be sure to declare that the work had been done and offer a no-strings return. Only fair.


Reply

photomac: good information on the link you provided.

unclemack: yeah I have seen eye glass lenses polished like that on a wheel.I will have to check out the product you described- and the u tube videos.

I soaked it in vinegar solution last nite for about 2 hrs and then coated it "bug tar removal paste" and left it there for 7hrs. I wiped it real good with a nice felt like cloth- I can see very little improvement-improvement non the less. I am wondering if the improvement is from the elbow grease-my wiping it down with the felt over and over .

I did try the cigarette ash method yesterday, I applied some cigarette ash this morning but did not notice any changes.

So far I have not broken , chipped , marred or scarred the glass- so its only logical for me to keep trying other combinations.

Mo-Fo- I have been thinking of very fine wet sandpaper-but I will refrain from that until I am sure I have tried everything, I can think of.

Thank you all for your suggestions


This is what it looks like now




Reply

The problem with trying various polishes to see if you can remove the etching is that a glass optic is ground to extremely precise specifications. Light waves which are reflected or refracted from a surface that's been ground and polished are used to determine the accuracy of the grind/polish. As I vaguely remember from my college physics days, they set up interference patterns which can be accurately measured in angstroms (1 angstrom = 1 ten-billionth of a meter, or 0.0001 micron). These interference patterns are used to show where defects lie in a lens surface. So it seems to me that the smallest deviation from the designed curvature is likely to reveal itself as one sort of aberration or another.


Reply

As a teenager I made a reflecting telescope. (150mm F10) Mirror ground using various ever finer grades of corundum. Polishing done using "jewellers rouge" which was a very fine iron oxide. You should be able to buy this from an astronomical supplies company. Trick would be to polish lens using a stroke that maintains existing curvature. Try googling "building a reflecting telescope" or similar.
bb2


Reply




Above is the current state of the glass. The images on the left are the back side of the lens and the ones on the right are the front face.

I soaked it in Ammonia and wiped with Micro-Fiber cloth, repeating it a few times . Soaking it in for longer than an hour each time, and wiping dry with the cloth.

The outcome has improved- a few layers of dead fungi or fungi etching has washed away or melted. I can at some places on the edges see the clear lens now-I could not tell you if I melted away any glass in the process.

I am going to continue using this technique . I did try acetone swipes and did not notice anything good so I stopped that treatment. I have not used the famous "peroxide & ammonia" mixture yet. The glass you can see suffers from pits or pock marks.

@cooltouch- I am at this time just hoping on improvements from what the fungus has already done. This will never come out to be the perfect glass- but might have some interesting effects i.e. if I can even get it clear enough to see through, but you make a very good point . I have not scoured , sanded or ground &polished it yet. I have used the Nikon Lens Pen - I think it would do but "beachboy2" is suggesting, I think that lens pen uses very fine iron oxide.

Thanks for your helpul insights- This glass looks beautiful on my desk as a decoration for now,and a constant reminder of "The Power of the Fungi"- I will be keeping my eyes open for a front element of a 50mm f2 Zeiss Pancolor lens-now that I have broken apart the lens,cleaned it , and lubed the focusing helicoid threads inside the lens.


Editado por última vez por Kathmandu el Mié Ene 13, 2010 10:59 am; editado 2 veces en total


Reply

hey Thanks for keeping us up to date as this is very informative and interesting to say the least .....looks like the glass is pitted on the 2 right hand photos Confused


Reply

No problemos. I am very happy to share and learn.