MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

M28x0.75 to M39
Ver tema anterior :: Ver tema siguiente  


Reply

i need an adapter for an M28x0.75 mount to leica thread. anyone know of a solution?

Editado por última vez por bobfriedman el Mié Dic 30, 2009 10:22 pm; editado 2 veces en total


Reply

I would like one too - Schneider?


patrickh


Reply

PS Good to see you here

patrickh


Reply

Hi Bob,

good to see you (also) here!!

Have one machined would have been my first reaction, since filter threads are usually always
Mxy * 0.75 but Leica thread mount is M39 * 26 tpi (a tad more than 1.0)

THEN I noticed that you haven't mentioned male or female for both thread mounts which makes a
big difference.... Question Question

Assuming that the M28 thread is male and the M39 female, it certainly calls for a machined solution,
very well known from adapting macro lenses to bellows or Nikon.


Reply

i was looking to mount a Leitz Summar 80/4.5 to Nikon PB-4....

good to see you all here as well....

Klaus-- you answered my PM with your post here.


Reply

i have been checking all the astro web sites with no luck.... and i may have mis-identified it at first.. Klaus's site lists it as M29 but the caliber shows it as 27.86 mm so i assumed M28.. help?

http://www.macrolenses.de/ml_detail.php?ObjektiveNr=63


Reply

Well Bob, no-one is without fault, but in that case I'm pretty confident that I read my caliber correctly....LOL
(it could be an older or newer lens than what I have, there are always surprises to be found...)

All these old macro lenses have a special thread mount, but that series was made for the Leitz ARISTOPHOT and
there exist mounting plates for the various lenses to use them on a size 0 shutter (which is M40 x 0.75, also a rare mount).
Finding such a piece is not that easy, but if you do, I have a M40-M39 adaptor ring here.

P.S.: I haven't gotten any PM Question


Reply

How about this place > http://www.srb-griturn.com/

They accept an order made.


Reply

koji escribió:
How about this place > http://www.srb-griturn.com/

They accept an order made.


thank you koji.. i will check it out.


Reply

kds315* escribió:

P.S.: I haven't gotten any PM Question


sent to nikongear


Reply

kds315* escribió:

All these old macro lenses have a special thread mount, but that series was made for the Leitz ARISTOPHOT and
there exist mounting plates for the various lenses to use them on a size 0 shutter (which is M40 x 0.75, also a rare mount).
Finding such a piece is not that easy, but if you do, I have a M40-M39 adaptor ring here.


thank you klaus!..


Reply

http://www.srb-griturn.com/ are good, but very expensive and you have to be quite patient.

I'll dig through my boxes and see if I can find a mount - you have to be patient with me too, pleeeze.


Reply

just found an obviously unused Micro Summar 80mm in its red box, took measurements and it is
indeed M28 thread mount!

Check my DB again, and you'll find both versions of the 80mm
Summar there:
28mm thread: http://www.macrolenses.de/ml_detail.php?ObjektiveNr=117
29mm thread: http://www.macrolenses.de/ml_detail.php?ObjektiveNr=63

the latter being the older type obviously.


Reply

Well, went through about 20 boxes just to find out that I only have one set left, have a look at this image, it shows teh lens mounted, 2nd to left.



This is the M40 mounting plate I spoke about.

Btw. the whole system looks like that (this is type I of the Aristophot, two more did follow):

http://www.macrolenses.de/ao_detail.php?AdonsNr=200


Editado por última vez por kds315* el Jue Dic 31, 2009 12:29 am; editado 1 vez en total


Reply

thank you klaus.. quite nice.. i am jealous.. impressive!.. your collection!..

i haven't purchased the leitz summar 80/4.5 yet as i need the mount. and i was trying to determine how difficult it would be to find one. i think i will pass on it..

however, i just purchased a leitz photar 180/6.3 but haven't gotten it yet and the photo shows M39 on that one.... anyway.. whether M39 or T-mount.. i have those adapters since they are readily available..

the summar is here on ebay.. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330391017244&ssPageName=STRK:MEWAX:IT


Reply

The Summar is a nice lens and the successor of the former, simpler made Milar type.
The Summars were followed by that Photars then. Maybe interesting to notice that such a
little 50mm Summar was the first lens Oskar Barnack used to create the very first Leica camera.

Today for real use I would rather recommend a 80mm Photar II in M42 mount (I have three or so)
(even Leitz was able to adapt to modern standards... Wink )