MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Yashica Electro 35 GSN not firing
Ver tema anterior :: Ver tema siguiente  


Reply

I bought an used Yashica Electro 35 GSN
I have cocked the lever but the shutter button does not fire, it is blocked.
Is it because I need to unlock it somehow? Or do you think the camera might be broken?


Reply

The quick *DOH* answer is that there's a shutter lock built around the shutter button, turn it the other way and see.


Reply

Nesster escribió:
The quick *DOH* answer is that there's a shutter lock built around the shutter button, turn it the other way and see.


yeah, I found out about it - thanks!
But I still have a problem.
The shutter does not seem to work. Whatever aperture I set, the shutter does not open. And I see no time selector.
What is more, after I cock the lever, I press the shutter, there is a short click, which sounds incomplete, and in fact, after it, as I touch the lever, it makes another "clunk" sound, like if the shutter button only triggered half of the mechanism, and the lever the second half. But never the iris opens. Not even if I select the "B" pose.


Reply

Camera is gone, either need to put into repair shop or buy another one. Is battery new inside and electrical contacts are clean ?


Reply

Attila escribió:
Camera is gone, either need to put into repair shop or buy another one. Is battery new inside and electrical contacts are clean ?


There is no battery inside, but wouldn't it only affect the light meter? Or is the shutter energy-dependent?


Reply

Orio escribió:
Attila escribió:
Camera is gone, either need to put into repair shop or buy another one. Is battery new inside and electrical contacts are clean ?


There is no battery inside, but wouldn't it only affect the light meter? Or is the shutter energy-dependent?


Yes, need battery.


Reply

If my memory works at all, the Yashica electronic shutter fires at max speed without a battery - so it should do 1/500.


Reply

You definitely need a battery to do a proper test, Yashica Electro's are not mechanical but "aperture priority only" cameras and therefore can't work without power.
As already said, default setting without battery is 1/500.


Editado por última vez por SVP el Lun Dic 28, 2009 9:52 pm; editado 1 vez en total


Reply

Thank you!
What battery do I need please? (I have no user manual)

p.s. is that normal that there is no times selector? Confused


Reply

Yes, it's normal, it's auto-only.

As for power, they were using the now obsolete PX32 (5.6V) Mercury, you could try 28A or 4LR44 (6v) but exposure won't be accurate. There are adapters though which use modern cells and provide proper voltage.

More info here (a good reference page for anything Electro):
http://www.yashica-guy.com/

And here's the manual:
http://www.yashica-guy.com/document/g-manual.html


Reply

Thank you! I will buy that adapter.

Any idea about the strange lever behaviour?
(it makes a clunk sound when trying to re-cock after having pressed the shutter button)


Reply

I use 6V alkaline battery + a spring works fine, metering is accurate.


Reply

I know the sound you refer to, all my Electros (1xCC, 1xGX, 2xGT, 1xGTN & 1xMG-1) are behaving like this, never got into the details thereof though and always assumed it was normal behaviour.


Reply

SVP escribió:
Y
As for power, they were using the now obsolete PX32 (5.6V) Mercury, you could try 28A or 4LR44 (6v) but exposure won't be accurate. There are adapters though which use modern cells and provide proper voltage.


Any tube and spring construction that makes a 4LR44 fit the space of a PX32 would do. The adapters are mechanical - some have a drop diode, but that is for the sake of other cameras with a voltage dependent circuit. The Yashica Electro 35 and most of its successors have a comparator circuit and need no battery reference voltage.


Reply

SVP escribió:
I know the sound you refer to, all my Electros (1xCC, 1xGX, 2xGT, 1xGTN & 1xMG-1) are behaving like this, never got into the details thereof though and always assumed it was normal behaviour.


It is. Indeed, absence of the "clunk" when cocking the shutter is an indication that the "pad of death" has gone sticky and the camera is about to fail.


Reply

Thank you. The clunk sounds better now Smile

Is there a way that I can use a normal today's battery to test the camera while the adapter arrives from the USA?


Reply

Orio escribió:
Thank you. The clunk sounds better now Smile

Is there a way that I can use a normal today's battery to test the camera while the adapter arrives from the USA?


I told you before ... I am using normal 6V alkaline battery , meter is accurate works fine. Available battery is shorter than genuine one, so need to make it longer with spring and and piece of plastic tube or similar.

http://www.mattdentonphoto.com/cameras/yashica_gsn.html



Reply

The spring can be any metal or alloy, or must be copper?
My doubt is, on the bottom of camera there is another spring, perhaps it will be entangled with new spring.

I guess plastic tube is to make battery thicker and not tilt?


Reply

Orio escribió:
The spring can be any metal or alloy, or must be copper?
My doubt is, on the bottom of camera there is another spring, perhaps it will be entangled with new spring.

I guess plastic tube is to make battery thicker and not tilt?


Orio, I use the same battery as Attila, and did a VERY basic adaptation.
Basically, I wrapped it in electrical tape to make it fit tighter, and added
a hunk of tinfoil to make it reach the contacts. This was only to be
temporary, as the tinfoil didn't seem like it would work very well. But...
it DOES work well, so I just left it at that. Shocked Laughing

Previous to that, I used a stick I found on the forest floor to jam into
the compartment to take up the width of the battery.... Embarassed


Reply

Orio escribió:
The spring can be any metal or alloy, or must be copper?
My doubt is, on the bottom of camera there is another spring, perhaps it will be entangled with new spring.

I guess plastic tube is to make battery thicker and not tilt?


There is plenty of place for plastic tube, good spring source any battery holder like old broken flash or similar. I got this set from Andy , I did test both GS and GSN what I had, both works trouble free.


Reply

Larry, your method sounds clever! I'll try that Very Happy

I have noticed that the rangefinder in my camera is misaligned vertically. It only is OK horizontally. I hope that it can be serviced by a generic lens/camera repair man.

Another thing: do your cameras have light seals around back door?
Because mine does not, and I don't know if it's by design or if they are missing.
The back door seems to have some "play" when closed - not holding firmly. I hope there is no leak.

One last thing: the ASA counter just arrives to 500. Since the camera is only auto mode, I guess this means it's impossible to push a 400 film into 1600, or to use any 1600 film at all. Or is there a workaround?


Reply

Orio escribió:
Larry, your method sounds clever! I'll try that Very Happy

I have noticed that the rangefinder in my camera is misaligned vertically. It only is OK horizontally. I hope that it can be serviced by a generic lens/camera repair man.

Another thing: do your cameras have light seals around back door?
Because mine does not, and I don't know if it's by design or if they are missing.
The back door seems to have some "play" when closed - not holding firmly. I hope there is no leak.

One last thing: the ASA counter just arrives to 500. Since the camera is only auto mode, I guess this means it's impossible to push a 400 film into 1600, or to use any 1600 film at all. Or is there a workaround?


Orio, no light seals on mine, and it works well. I also have a bit of play in
the door.

You could push the 400 to 1600 by underexposing by 2 stops and then develop at 1600.

Hope this helps you. I have pushed Portra 400 this way, and it worked out very nicely.


Reply

Laurence escribió:

Orio, no light seals on mine, and it works well. I also have a bit of play in
the door.


thanks, good to know!

Cita:
You could push the 400 to 1600 by underexposing by 2 stops and then develop at 1600.
Hope this helps you. I have pushed Portra 400 this way, and it worked out very nicely.


Larry, this escapes me: if the camera works in auto mode only, how can I underexpose shots?