| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
arvinkg
Registrado: 21 Dic 2009 Mensajes: 2
|
 Publicado: Lun Dic 21, 2009 5:01 pm Asunto: Carl Zeiss 180mm zebra question |
|
 Publicado: Lun Dic 21, 2009 5:01 pm Asunto: Carl Zeiss 180mm zebra question |
|
|
arvinkg wrote:
Hi, my name is Dusan and I am glad that Im also member of this forum, since I just love manual focus lenses.
I have MTO 1000mm f10
Carl Zeiss Jena Tessar 50mm f2.8
Carl Zeiss Bioptar 120mm f2.8 and
Carl Zeiss Zebra 180mm f2.8
Last two I got couple days ago.
120mm is Pentacon 6 mount and 180mm is M42
Questions:
180mm: the blades for aperture doesnt work, so when I attach the lens on my Nikon d300 body using m42 to nikon adapter and when switch in A or M mode, I can shoot only at 2.8. I will take it to the service to fix the blades, but the question is how to adjust the lens so I can manualy opet or close the aperture on the lens body.
120mm: same question - how to adjust it to manualy control aperture using ring on the lens while camera is in A or M mode
PS (the carl zeiss 50mm f2.8 i have, was already adjusted. The tiny needle which close or open the blades while it is pushed or released is screwed down so on that lens, I put camera in A mode and while opet or close aperture using the lens ring, there is an exposure change and that is perfect, now i would like to have those 120 and 1800mm lenses adjusted to.
And how to achive infinity focus on all lenses
Thanks a lot for help
Dusan |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Dic 21, 2009 5:04 pm Asunto: |
|
 Publicado: Lun Dic 21, 2009 5:04 pm Asunto: |
|
|
Attila wrote:
Welcome Dusan! |
|
| Volver arriba |
|
 |
rick_oleson
 Registrado: 26 Feb 2007 Mensajes: 386 Ubicación: Lexington Kentucky USA
|
 Publicado: Mar Dic 22, 2009 2:33 am Asunto: |
|
 Publicado: Mar Dic 22, 2009 2:33 am Asunto: |
|
|
rick_oleson wrote:
Hello Dusan:
My only experience with the 180/2.8 is in the Pentacon Six mount. In this mount, when the lens is not on the P6 camera the diaphragm behaves as a manual diaphragm, closing down to the selected aperture as you turn the ring. It works this way when it is on my adapter for my Canon DSLR, and I assume it would do so on an adapter for a Nikon as well. In the M42 mount, if you have an A/M switch on the lens, set it to M and it should act the same way.
However, this only works if the lens is in proper working condition. If your blades are stuck open, there will be no way to make them close down until you have the lens cleaned to fix that problem.
If you have an M42 mount lens with no A/M switch and no depth-of-field preview switch, you may be out of luck.
rick _________________ I don't know what I want to be when I grow up |
|
| Volver arriba |
|
 |
seuret
Registrado: 29 Nov 2009 Mensajes: 34 Ubicación: Bulgaria
|
 Publicado: Mar Dic 22, 2009 9:02 am Asunto: |
|
 Publicado: Mar Dic 22, 2009 9:02 am Asunto: |
|
|
seuret wrote:
| rick_oleson escribió: |
Hello Dusan:
My only experience with the 180/2.8 is in the Pentacon Six mount. In this mount, when the lens is not on the P6 camera the diaphragm behaves as a manual diaphragm, closing down to the selected aperture as you turn the ring. It works this way when it is on my adapter for my Canon DSLR, and I assume it would do so on an adapter for a Nikon as well. In the M42 mount, if you have an A/M switch on the lens, set it to M and it should act the same way.
However, this only works if the lens is in proper working condition. If your blades are stuck open, there will be no way to make them close down until you have the lens cleaned to fix that problem.
If you have an M42 mount lens with no A/M switch and no depth-of-field preview switch, you may be out of luck.
rick |
Yes, it does work on Nikon too. I have the same(zebra) version of the P6 version. It's a "brand" new lens. I bought it from an old warehouse for photographic technics in the original cylindrical leather case. I love it on my Nikon D90 and also on my Praktica MTL 5B.
On P6 it's a little bit soft, especially at the corners, but on APC-S camera it's like a razor Probably my Nikon uses most of the center of the lens  _________________ SLR Cameras:Zenit 122, Praktica MTL5B, Nikon D90, Nikon F90x
RF Cameras: Siluet Elektro
MF Lenses: Helios 44-6 58/2; Pentacon 50/1.8 Electric; Pentacon 135/2.8 Auto; Jupiter 9 85/2; Tamron Adaptall 135/2.8
AF Lenses: Nikon 17-55/2.8 DX; Nikon 70-300 VR; Nikon 50/1.8 D; Nikon 18-70DX; Sigma 24/2.8 |
|
| Volver arriba |
|
 |
lahnet
 Registrado: 10 Abr 2007 Mensajes: 1167 Ubicación: Denmark
|
 Publicado: Mar Dic 22, 2009 10:17 am Asunto: |
|
 Publicado: Mar Dic 22, 2009 10:17 am Asunto: |
|
|
lahnet wrote:
If you need to DIY this may help.
 _________________ Henrik
Lahnet-Foto
My FLICKR
Gear list |
|
| Volver arriba |
|
 |
rick_oleson
 Registrado: 26 Feb 2007 Mensajes: 386 Ubicación: Lexington Kentucky USA
|
 Publicado: Mar Dic 22, 2009 11:37 am Asunto: |
|
 Publicado: Mar Dic 22, 2009 11:37 am Asunto: |
|
|
rick_oleson wrote:
that looks familiar!!
:)= _________________ I don't know what I want to be when I grow up |
|
| Volver arriba |
|
 |
arvinkg
Registrado: 21 Dic 2009 Mensajes: 2
|
 Publicado: Mar Dic 22, 2009 1:56 pm Asunto: Ok |
|
 Publicado: Mar Dic 22, 2009 1:56 pm Asunto: Ok |
|
|
arvinkg wrote:
i will take a picture of the lenses tomorow and post it here.
My 180mm does not have M-A focus switch, I am not sure that there is autofocus model of this lens?
Does anyone with M42 version have infinity focus on Nikon (d300?)
thanks |
|
| Volver arriba |
|
 |
rick_oleson
 Registrado: 26 Feb 2007 Mensajes: 386 Ubicación: Lexington Kentucky USA
|
 Publicado: Mar Dic 22, 2009 4:24 pm Asunto: |
|
 Publicado: Mar Dic 22, 2009 4:24 pm Asunto: |
|
|
rick_oleson wrote:
It would not be an M/A focus switch, it's an M/A diaphragm switch. At the A setting, the diaphragm stays open until the linkage in the camera body closes it down at the instant of exposure; at the M setting, it closes down as you turn the aperture ring. On an M42 lens, when on A the lens stays wide open when off the camera, so you would like to have the A/M switch so you can control it manually. There are ways around this, but the A/M switch is best if you have it on the lens. _________________ I don't know what I want to be when I grow up |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|