| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
cheve
 Registrado: 31 Mar 2009 Mensajes: 182
Expire: 2011-12-06
|
 Publicado: Mar Dic 01, 2009 7:07 pm Asunto: what to use to keep the 'grip rubber' firm on the focus ring |
|
 Publicado: Mar Dic 01, 2009 7:07 pm Asunto: what to use to keep the 'grip rubber' firm on the focus ring |
|
|
cheve wrote:
Hi,
What would/should one use to keep the 'grip rubber' material on the focus ring? I got another new 'old' lens and the grip material ring is loose:-).
My current plan is to use the typical glue for arts and craft. Pointers and suggestions are appreciated.
Cheers, _________________ Adaptall-2: 17/3.5(51B),80-210/3.8-4(103A),60-300/3.8-5.4(23A) C/Y: CZ 35-70/3.4,RMC Tokian 80-200/4.5
EXk: Topcor Re Auto 35/2.8(broken),135/3.5, Steinheil Culminar 135/4.5 Leitz-R: 50/2,90/2,180/4,180/3.4,Angenieux 35-70/2.5-3.3
M42: pentacon 135/2.8,135/2.8(preset),Super-Takumar 55/1.8,Meyer-Optik 50/1.8 FD: Voigtlander 125/2.5 SL
K: smc 50/1.2, porst 55/1.2, Takumar(Bayonet) 135/2.5 Minolta: rokker 58/1.4,58/1.2 nikkon: Nikkor H Auto 300/4.5
OM: 21/2,21/3.5,28/3.5,50/1.2,300/4.5,500/8,35-70/3.6, viv 17/3.5,viv 28/1.9,viv 135/2.3
Rollei: Voigtlander Color-Ultron 55/1.4 AR T: Tele-Astranar 135/3.5
EF: 30/1.4(Sigma),50/1.8,28-70L,80-200L,24-105L,70-300DO,18-200OS(Sigma)
|
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Mar Dic 01, 2009 10:42 pm Asunto: |
|
 Publicado: Mar Dic 01, 2009 10:42 pm Asunto: |
|
|
cooltouch wrote:
A little bit of contact cement will work. Don't overdo it though -- a little bit of that stuff goes a long way.
Contact cement is nice because it remains pliable. I use it for re-attaching camera body leatherettes after removing them for repairs. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
cheve
 Registrado: 31 Mar 2009 Mensajes: 182
Expire: 2011-12-06
|
 Publicado: Mié Dic 02, 2009 3:19 am Asunto: |
|
 Publicado: Mié Dic 02, 2009 3:19 am Asunto: |
|
|
cheve wrote:
| cooltouch escribió: |
A little bit of contact cement will work. Don't overdo it though -- a little bit of that stuff goes a long way.
Contact cement is nice because it remains pliable. I use it for re-attaching camera body leatherettes after removing them for repairs. |
thanks _________________ Adaptall-2: 17/3.5(51B),80-210/3.8-4(103A),60-300/3.8-5.4(23A) C/Y: CZ 35-70/3.4,RMC Tokian 80-200/4.5
EXk: Topcor Re Auto 35/2.8(broken),135/3.5, Steinheil Culminar 135/4.5 Leitz-R: 50/2,90/2,180/4,180/3.4,Angenieux 35-70/2.5-3.3
M42: pentacon 135/2.8,135/2.8(preset),Super-Takumar 55/1.8,Meyer-Optik 50/1.8 FD: Voigtlander 125/2.5 SL
K: smc 50/1.2, porst 55/1.2, Takumar(Bayonet) 135/2.5 Minolta: rokker 58/1.4,58/1.2 nikkon: Nikkor H Auto 300/4.5
OM: 21/2,21/3.5,28/3.5,50/1.2,300/4.5,500/8,35-70/3.6, viv 17/3.5,viv 28/1.9,viv 135/2.3
Rollei: Voigtlander Color-Ultron 55/1.4 AR T: Tele-Astranar 135/3.5
EF: 30/1.4(Sigma),50/1.8,28-70L,80-200L,24-105L,70-300DO,18-200OS(Sigma)
|
|
| Volver arriba |
|
 |
zx9
Registrado: 17 Mayo 2009 Mensajes: 2 Ubicación: London
|
 Publicado: Mié Dic 02, 2009 6:51 pm Asunto: |
|
 Publicado: Mié Dic 02, 2009 6:51 pm Asunto: |
|
|
zx9 wrote:
You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses. _________________ Regards
Keith
http://www.flickr.com/photos/zx9/ |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mié Dic 02, 2009 11:50 pm Asunto: |
|
 Publicado: Mié Dic 02, 2009 11:50 pm Asunto: |
|
|
Attila wrote:
Welcome Keith! |
|
| Volver arriba |
|
 |
cheve
 Registrado: 31 Mar 2009 Mensajes: 182
Expire: 2011-12-06
|
 Publicado: Vie Dic 04, 2009 7:57 pm Asunto: |
|
 Publicado: Vie Dic 04, 2009 7:57 pm Asunto: |
|
|
cheve wrote:
| zx9 escribió: |
| You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses. |
'
Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.
Cheers, _________________ Adaptall-2: 17/3.5(51B),80-210/3.8-4(103A),60-300/3.8-5.4(23A) C/Y: CZ 35-70/3.4,RMC Tokian 80-200/4.5
EXk: Topcor Re Auto 35/2.8(broken),135/3.5, Steinheil Culminar 135/4.5 Leitz-R: 50/2,90/2,180/4,180/3.4,Angenieux 35-70/2.5-3.3
M42: pentacon 135/2.8,135/2.8(preset),Super-Takumar 55/1.8,Meyer-Optik 50/1.8 FD: Voigtlander 125/2.5 SL
K: smc 50/1.2, porst 55/1.2, Takumar(Bayonet) 135/2.5 Minolta: rokker 58/1.4,58/1.2 nikkon: Nikkor H Auto 300/4.5
OM: 21/2,21/3.5,28/3.5,50/1.2,300/4.5,500/8,35-70/3.6, viv 17/3.5,viv 28/1.9,viv 135/2.3
Rollei: Voigtlander Color-Ultron 55/1.4 AR T: Tele-Astranar 135/3.5
EF: 30/1.4(Sigma),50/1.8,28-70L,80-200L,24-105L,70-300DO,18-200OS(Sigma)
|
|
| Volver arriba |
|
 |
nemesis101
 Registrado: 25 Mar 2008 Mensajes: 2050 Ubicación: Oregon USA
Expire: 2015-01-22
|
 Publicado: Vie Dic 04, 2009 9:29 pm Asunto: |
|
 Publicado: Vie Dic 04, 2009 9:29 pm Asunto: |
|
|
nemesis101 wrote:
I use double sided carpet tape.. some doubles sided tapes don't adhere as the pasticisers in the rubber / leatherette cause a sticky goo to form..
I have a Nikon 950 where the factory glue likewise 'melted' and oozed over everything!
Carpet tape means that you can remove the cover later - many contact adhesives (like Evostik etc.) are permanent.. Pliobond from a good hardware store works well..
Doug.
| cheve escribió: |
| zx9 escribió: |
| You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses. |
'
Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.
Cheers, |
_________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Vie Dic 04, 2009 9:33 pm Asunto: |
|
 Publicado: Vie Dic 04, 2009 9:33 pm Asunto: |
|
|
cooltouch wrote:
| nemesis101 escribió: |
| Cita: |
| Carpet tape means that you can remove the cover later - many contact adhesives (like Evostik etc.) are permanent.. Pliobond from a good hardware store works well.. |
'
Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.
|
Just to clarify my earlier comment regarding the use of contact cement, the type I use is made by either Elmers or DAP, and comes in a small bottle with an applicator in the cap. It is very similar to Pliobond in that it remains pliable. In fact, I've owned both, and I can't honestly tell the difference between the two. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
cheve
 Registrado: 31 Mar 2009 Mensajes: 182
Expire: 2011-12-06
|
 Publicado: Dom Dic 06, 2009 12:02 am Asunto: |
|
 Publicado: Dom Dic 06, 2009 12:02 am Asunto: |
|
|
cheve wrote:
@Doug: thanks for the new option.
@Michael: thanks for your followup comments. I assume the 'DAP' are brand stocked by 'Home Depot'.
Cheers _________________ Adaptall-2: 17/3.5(51B),80-210/3.8-4(103A),60-300/3.8-5.4(23A) C/Y: CZ 35-70/3.4,RMC Tokian 80-200/4.5
EXk: Topcor Re Auto 35/2.8(broken),135/3.5, Steinheil Culminar 135/4.5 Leitz-R: 50/2,90/2,180/4,180/3.4,Angenieux 35-70/2.5-3.3
M42: pentacon 135/2.8,135/2.8(preset),Super-Takumar 55/1.8,Meyer-Optik 50/1.8 FD: Voigtlander 125/2.5 SL
K: smc 50/1.2, porst 55/1.2, Takumar(Bayonet) 135/2.5 Minolta: rokker 58/1.4,58/1.2 nikkon: Nikkor H Auto 300/4.5
OM: 21/2,21/3.5,28/3.5,50/1.2,300/4.5,500/8,35-70/3.6, viv 17/3.5,viv 28/1.9,viv 135/2.3
Rollei: Voigtlander Color-Ultron 55/1.4 AR T: Tele-Astranar 135/3.5
EF: 30/1.4(Sigma),50/1.8,28-70L,80-200L,24-105L,70-300DO,18-200OS(Sigma)
|
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Dom Dic 06, 2009 1:00 am Asunto: |
|
 Publicado: Dom Dic 06, 2009 1:00 am Asunto: |
|
|
cooltouch wrote:
| cheve escribió: |
| @Michael: thanks for your followup comments. I assume the 'DAP' are brand stocked by 'Home Depot'. |
Yes, as a matter of fact, I just bought a bottle of DAP contact cement from my local Home Depot just a couple weeks ago. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|