| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Vie Nov 20, 2009 5:03 am Asunto: Acros 100 and Barry's 2-Bath |
|
 Publicado: Vie Nov 20, 2009 5:03 am Asunto: Acros 100 and Barry's 2-Bath |
|
|
Katastrofo wrote:
This is my first go using the Paterson reel/tank for 120:
These are just test shots for developing I took this afternoon up on Monte Sano, but am happier with these results than the 35mm Arista Premium roll. Shots are uncropped. |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Vie Nov 20, 2009 5:13 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:13 am Asunto: |
|
|
Orio wrote:
Wow... gorgeous greys. Terrific first roll.
Wish me good luck with mine, Master  _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
marty
 Registrado: 09 Abr 2009 Mensajes: 767 Ubicación: Italy
|
 Publicado: Vie Nov 20, 2009 5:18 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:18 am Asunto: |
|
|
marty wrote:
Terrific ones. Reflections shots always caught me, dunno why.
Cheers, Marty. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Vie Nov 20, 2009 5:20 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:20 am Asunto: |
|
|
Katastrofo wrote:
Good luck, Orio, hope yours turn out great!
The above were taken with my Ricohflex Dia L. The ground by the swamp
was covered with dry leaves, but had the same mud as in the pics, almost
went up to my knees in one spot!
Here's the dev:
Prewash: woops, forgot.
Bath A: 4 mins
Bath B: 4 mins
Stop: <1 min
Fixer: 6 mins
I was watching for the dye to appear in the baths, stop, but appeared
in the fixer. Turned it a nice purple, 500ml of fixer gone bye-bye.
The borders on the negs were a nice light grey, tho. |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Vie Nov 20, 2009 5:22 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:22 am Asunto: |
|
|
Katastrofo wrote:
| marty escribió: |
Terrific ones. Reflections shots always caught me, dunno why.
Cheers, Marty. |
Thanks, Marty! I took some in color with my Koni Rapid Omega 100,
will have them and a roll I took last Satuday with the Yashica A, dev'd
tomorrow. |
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Vie Nov 20, 2009 5:41 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:41 am Asunto: |
|
|
Seele wrote:
I do not think you are meant to pre-soak film when using two-bath developers. |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Vie Nov 20, 2009 6:19 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 6:19 am Asunto: |
|
|
Katastrofo wrote:
Seele, that may be, but I didn't encounter untoward results when I
prewashed the TMAX:
This is filling the tank with 20C temp water, agitating for one minute,
decant, repeat, then start dev. It removed the dye from the TMAX. |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Vie Nov 20, 2009 8:26 am Asunto: |
|
 Publicado: Vie Nov 20, 2009 8:26 am Asunto: |
|
|
Orio wrote:
| Katastrofo escribió: |
This is filling the tank with 20C temp water, agitating for one minute,
decant, repeat, then start dev. It removed the dye from the TMAX. |
Bill, what dye?
I didn't know that B&W films had dyes. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Vie Nov 20, 2009 1:54 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 1:54 pm Asunto: |
|
|
Seele wrote:
| Orio escribió: |
| Katastrofo escribió: |
This is filling the tank with 20C temp water, agitating for one minute,
decant, repeat, then start dev. It removed the dye from the TMAX. |
Bill, what dye?
I didn't know that B&W films had dyes. |
At the beginning, sensitive materials were only sensitive to blue, various dyes were incorporated into the emulsion to make it sensive to more colours, therefore, apart from the real blue-sensitive materials, all black-and-white materials contain dyes.
Dyes are also applied to the support side of the film for absorbing light passing through the whole thickness of the film, so that it would reduce the light bouncing back through the support and expose the emulsion a second time through irradiation, but it is normally known as "anti-halation dye". |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Vie Nov 20, 2009 2:00 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 2:00 pm Asunto: |
|
|
Katastrofo wrote:
Orio, I guess I made a nomenclature error. Whatever that is in the
masking layer, antihalaltion layer, with TMAX it was blue, with Acros it
is purple, TriX and Arista Premium it is lavender/purple:
The Arista Premium that was done professionally has a very faint blue/purple color to the borders, nothing like what is pictured above.
Seele beat me to it, thanks Seele!  |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Vie Nov 20, 2009 2:26 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 2:26 pm Asunto: |
|
|
Nesster wrote:
The Acros and Dia really make sense of the swamp, these are the best ones yet you've done.
I bet the purple fixer would still be good _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Vie Nov 20, 2009 4:00 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 4:00 pm Asunto: |
|
|
Seele wrote:
The residual purple colour seen on the negatives is actually the colour put into the cellulose acetate film base, some films use tinted support as a mean to reduce halation and irradiation. |
|
| Volver arriba |
|
 |
hexi
 Registrado: 01 Jul 2009 Mensajes: 1631 Ubicación: France
Expire: 2011-11-18
|
 Publicado: Vie Nov 20, 2009 5:11 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:11 pm Asunto: |
|
|
hexi wrote:
Very good, this film gives incredibly detailed images, and you made good use of it. I think i prefer the 1st , both are equally superb. The range of greys is fantastic by the way. _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Vie Nov 20, 2009 5:39 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 5:39 pm Asunto: |
|
|
Katastrofo wrote:
Jussi, Seele, and Hexi, thanks for your comments. I'm happy with these,
hope the TMAX roll comes out with some good one.
@Seele, do you have a recommended formula for a fixer? I've been
looking at some formulae and seem to have half the chemicals it would
take to make it, already. |
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Vie Nov 20, 2009 10:14 pm Asunto: |
|
 Publicado: Vie Nov 20, 2009 10:14 pm Asunto: |
|
|
Seele wrote:
Bill,
It was a little more than twenty years ago that my local photographic dealer had a barrel of "hypo" (sodium thiosulphate) sold by weight for pennies; certainly it was low-grade stuff with a fair bit of dirt in it, but as long as the solution was filtered it worked as well as anything. These days it is not really that inexpensive, so I gave up making my own fixer, besides the ammonium-based ones work much faster and not at all costly.
If you want to make home brew fixer, you can try this:
Ilford IF-2 film fixer
Sodium thiosulphate 400g
Potassium metabisulphite 25g
Water to 1 litre
A slight change of proportion makes...
Ilford IF-4 paper fixer
Sodium thiosulphate 200g
Potassium metabisulphite 25g
Water to 1 litre |
|
| Volver arriba |
|
 |
Farside
 Registrado: 01 Sep 2007 Mensajes: 6579 Ubicación: Ireland
Expire: 2013-12-27
|
 Publicado: Sáb Nov 21, 2009 1:10 am Asunto: |
|
 Publicado: Sáb Nov 21, 2009 1:10 am Asunto: |
|
|
Farside wrote:
| Seele escribió: |
It was a little more than twenty years ago that my local photographic dealer had a barrel of "hypo" (sodium thiosulphate) sold by weight for pennies; certainly it was low-grade stuff with a fair bit of dirt in it, but as long as the solution was filtered it worked as well as anything. |
I recall every chemist's shop used to stock raw fixer and developer, sold by the pound. Sure, you could buy fancy packeted stuff, but for lads on pocket money it was a lot cheaper doing it the trad way.
I doubt if there's a single chemist left in the UK or Ireland who stocks raw chemicals (not just photographic) any more, such is the dumbing-down and nanny-state culture we now have. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Sáb Nov 21, 2009 3:26 am Asunto: |
|
 Publicado: Sáb Nov 21, 2009 3:26 am Asunto: |
|
|
Katastrofo wrote:
Seele, thanks much for the fixer formulae! |
|
| Volver arriba |
|
 |
Seele
 Registrado: 17 Abr 2009 Mensajes: 746 Ubicación: Sydney Australia
|
 Publicado: Sáb Nov 21, 2009 12:34 pm Asunto: |
|
 Publicado: Sáb Nov 21, 2009 12:34 pm Asunto: |
|
|
Seele wrote:
Bill,
There are plenty more recipes in my notebooks... and out there too.
The fixer formulae I mentioned are as basic as they come: the metabisulphite gives acidity to kill development instantly so you can even forego the stop bath, but there again, by using stop bath it can keep the fixer potency better. Note that it is not a hardening fixer, so it can be washed out quicker afterwards. |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Sáb Nov 21, 2009 3:23 pm Asunto: |
|
 Publicado: Sáb Nov 21, 2009 3:23 pm Asunto: |
|
|
Katastrofo wrote:
Seele, thanks again, will check with Artcraft Chemicals to see if they have
these, pretty sure they do, and good to know it's a non-hardening fixer. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|