MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Light meter recommendation(s)?
Ver tema anterior :: Ver tema siguiente  


Reply

Does anyone have a recommendation for a currently produced light meter, analog or digital, that is affordable? (Read as retired and Obama has cancelled our Social Security raise)


Reply

greg escribió:
Does anyone have a recommendation for a currently produced light meter, analog or digital, that is affordable? (Read as retired and Obama has cancelled our Social Security raise)


I found for print film any of them good due lot of tolerance of film, I did try Gössen Lunasix 3 and a few others. Try to get battery free or that one what is works with alkaline batteries. For Gössen I use hearing aid batteries as mercury battery replacement.

I still looking for deadly accurate ones for slides and/or still heave to learn how to measure light for slides.


Editado por última vez por Attila el Vie Sep 11, 2009 8:30 pm; editado 1 vez en total


Reply

Why do you specify currently produced?


Reply

Attila escribió:
I still looking for deadly accurate ones for slides and/or still heave to learn how to measure light for slides.


I heard that slides do require very precise light measure, that can surely be achieved by the body internal metering, in other cases if you're looking for a very accurate lightmeter for slides, i recommend once more the Sverdolsk 4 model , the one i have. Accurate as hell to 1/3 aperture. Use is very simple :

you point the subject, after having set iso and measure correction if you want ( -1/ 0 /+1 ) then when pressing a button you turn in the same time a knob which indicates apertures. There's a red dot near the window pointer , and when it switched off, the measure is correct. about 30€ on ebay.


Reply

hexi escribió:
Attila escribió:
I still looking for deadly accurate ones for slides and/or still heave to learn how to measure light for slides.


I heard that slides do require very precise light measure, that can surely be achieved by the body internal metering, in other cases if you're looking for a very accurate lightmeter for slides, i recommend once more the Sverdolsk 4 model , the one i have. Accurate as hell to 1/3 aperture. Use is very simple :

you point the subject, after having set iso and measure correction if you want ( -1/ 0 /+1 ) then when pressing a button you turn in the same time a knob which indicates apertures. There's a red dot near the window pointer , and when it switched off, the measure is correct. about 30€ on ebay.


Thanks! hard to believe it is better than Gössen I think I need to learn more instead of looking better one or try some of the latest one.


Reply

Spotmatic F in-camera metering has worked very well for me with Provia; I admit I do slightly re-adjust exposure according to situation.

For critical accuracy I use Pentax Spotmeter V, take readings all over the scene and use zone system to select a starting exposure, then chimp with digital cam using same taking lens to get it absolutely perfect before photographing with same lens on film camera.

I also sometimes use Westron III ($10-20US); darn accurate & no batteries!

For some situations bracketing is the only solution.


Reply

For Attila if interested, this is how it looks like . So i think that if your camera has exposure compensation , plus the light meter -/0/+ and the precise metering, you'll be able to have more that accurate measure for your slides.

The guy messed it up and the circle is upside down, but you can see the essantial stuff. takes 3 PX625 batteries plus 3 "1€" cents to fit Very Happy cause the original battery is discontinued

Haz clic aquí para verlo en eBay


Reply

Pentax digital spotmeter. The best that I had.

With the spot you can calculate where will stay each luminous thing in the final copy.

Some job at the begin. When you "have" it, easy and usefull.


Reply

Nesster escribió:
Why do you specify currently produced?


I have a drawer half full of old ones - all very sick or dead.


Reply

I have a Gossen Luna Pro SBC that uses 9v batteries, and is very accurate. And a drawerful of ones that are more or less so.

Re. slide exposure - I suppose one can go to extremes and get great results. However some simple procedures and thought can get you good enough results often enough. I learned using a Pen FT and slide film. The Pen FT TTL metering was not fully coupled - you'd have to translate the needle reading to the aperture ring. Yet, except for laziness, I could meter just fine with that primitive set up. With manual exposure, it's not the compensation, it's what you measure. I still don't have a great handle on exposure compensation stuff, I prefer to meter something I know and use that.


Reply

When I'm not using my Weston V (forty-odd years old and still going strong), I use a Sekonic L308. The Weston and Sekonic agree to within better than a quarter of a stop. Mostly, I use the Weston for slides and the Sekonic for everything else, including flash (the Weston's a bit iffy for that...), though that's just a matter of custom, as both are close enough to each other to be interchangeable. As for batteries, the L308 takes a AA battery, which has been widely available since the early middle ages, and the Weston of course takes none at all, so a visit to a battery shop with a Weston is never a disappointing experience.

The L308 is inexpensive, does incident, reflected, and flash, and will also measure the luminosity range. I have no experience of other makes, so others will advise on that, but the L308 does everything I want, does it accurately, and does it with the commonest battery on the planet.

(Well, I did have a Leningrad once. Actually, I had one twice, proving that I hadn't learned from the first mistake. Neither of them was accurate, and neither of them was within a stop and a half of what it should be.)


Reply

Would agree on the Sverdlovsk 4, its very good, it will take pretty much any 1.5v batteries in 3's, and can be calibrated for slightly differing voltages too. If you have it in the boxed set it has a 3xAA battery pack as well


Reply

hexi escribió:

I heard that slides do require very precise light measure, that can surely be achieved by the body internal metering, in other cases if you're looking for a very accurate lightmeter for slides, i recommend once more the Sverdolsk 4 model , the one i have. .


I believe it's spelled Sverdlovsk 4. Haz clic aquí para verlo en eBay.de


Reply

Yes i know. Its even written on my lightmeter Wink Its the town name actually located in Ukraine.

woot ! i just put a second 1€ cent coin in it, and that definitevely fixes the contact issue i had Cool


Reply

When I looked into light meters a while back, it was the Minolta Autometer IV F which came up often as a recommendation for something accurate and reliable.

Haz clic aquí para verlo en eBay.de

I ended up not buying a lightmeter at all though, so can't give feedback from my own experience.


Reply

I've used the Voigtländer VC Meter II, it has a nice design that fits my folding rangefinders very well. Very accurate and one of the simplest = best designed user interfaces ever.


Reply

Sekonic auto leader L-188. It went out of production in 2005 but maybe it can still be found. In my experience it's a dependable and robust tool. It runs on one SR-44 1,5V silver oxide battery which lasts a very long time.
It's a very simple to use match and needle unit, the speed scale goes from 8' to 1/2000' while aperture one is f1 to f64. ISO settings from 6 to 12000. It comes with a leather holder and wrist band.

Regards, Marty.


Reply

Nesster escribió:
I have a Gossen Luna Pro SBC that uses 9v batteries, and is very accurate.

+1
Incredible useful range, would have you measuring black cats in coal cellars.