| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Rolf
 Registrado: 02 Mayo 2009 Mensajes: 4170 Ubicación: NRW/Germany
Expire: 2015-12-26
|
 Publicado: Vie Jul 03, 2009 8:20 pm Asunto: Olympus OM confirm adapter to EOS |
|
 Publicado: Vie Jul 03, 2009 8:20 pm Asunto: Olympus OM confirm adapter to EOS |
|
|
Rolf wrote:
Hi,
I have a lot of problems with my present confirm adapter. It is not possible to find the exact focus point. The focus lights within the cam flickers all the time.
The following picture shows my actual adapter
The confirm chip looks different to my other confirm adapters to EOS, for example Leica, M42 etc. The chip on these adapters looks like this one
Could it be that this is the reason for my problems? My adapter and the picture of the different adapter are from the same dealer. He is not in a position to look into his warehouse and to deliver one with the chip on his picture. Poor customer service.
Are there any suggestions regarding another and fully functional confirm adapter from your side? I asked also few days ago in a German forum, but with only one answer. This colleague wrote that the problems from OM to EOS are fundamentally.
Many thanks in advance.
Rolf _________________ Rolf |
|
| Volver arriba |
|
 |
hk300
 Registrado: 30 Oct 2008 Mensajes: 1041 Ubicación: Hong Kong
|
 Publicado: Sáb Jul 04, 2009 1:00 am Asunto: |
|
 Publicado: Sáb Jul 04, 2009 1:00 am Asunto: |
|
|
hk300 wrote:
what lens are you using? _________________ No longer member , please don't try to contact to him |
|
| Volver arriba |
|
 |
shadows
 Registrado: 17 Feb 2009 Mensajes: 122 Ubicación: Canada
|
 Publicado: Sáb Jul 04, 2009 1:06 am Asunto: |
|
 Publicado: Sáb Jul 04, 2009 1:06 am Asunto: |
|
|
shadows wrote:
Wild shot, but maybe the chip isn't making proper contact with the electronic pins on the camera, could be offset. |
|
| Volver arriba |
|
 |
hk300
 Registrado: 30 Oct 2008 Mensajes: 1041 Ubicación: Hong Kong
|
 Publicado: Sáb Jul 04, 2009 1:36 am Asunto: |
|
 Publicado: Sáb Jul 04, 2009 1:36 am Asunto: |
|
|
hk300 wrote:
| shadows escribió: |
| Wild shot, but maybe the chip isn't making proper contact with the electronic pins on the camera, could be offset. |
If you put this adapter on your camera, what aperture does it give you? F2 ?
i guess it has something to do with the lens / AF chip combination. Are you trying to use e.g. 50 1.2 or so? _________________ No longer member , please don't try to contact to him |
|
| Volver arriba |
|
 |
Rolf
 Registrado: 02 Mayo 2009 Mensajes: 4170 Ubicación: NRW/Germany
Expire: 2015-12-26
|
 Publicado: Sáb Jul 04, 2009 8:00 am Asunto: |
|
 Publicado: Sáb Jul 04, 2009 8:00 am Asunto: |
|
|
Rolf wrote:
Hi, thanks for your reply.
I have the following OM lenses
1.4 - 50
1.8 - 50
3,5 - 28 and
8 - 500
The aperture shown in the cam (1DsMkIII and all other Canons) is always f 1.4 at Av-Mode. May be the chip is damaged ? Many thanks for your assistance.
Rolf _________________ Rolf |
|
| Volver arriba |
|
 |
eeyore_nl
 Registrado: 09 Nov 2008 Mensajes: 837 Ubicación: Netherlands
|
 Publicado: Sáb Jul 04, 2009 5:29 pm Asunto: |
|
 Publicado: Sáb Jul 04, 2009 5:29 pm Asunto: |
|
|
eeyore_nl wrote:
| Rolf escribió: |
The aperture shown in the cam (1DsMkIII and all other Canons) is always f 1.4 at Av-Mode. May be the chip is damaged ? Many thanks for your assistance.
Rolf |
I am using the same adapter on an OM - EOS adapter. My experience is also that the focus confirmation is less reliable than on the M42-EOS adapters that I bought before. Which is surprising, because the chip only fools the camera in thinking that an EF lens is attached. The AF circuit is in the camera, not in the chip. |
|
| Volver arriba |
|
 |
shadows
 Registrado: 17 Feb 2009 Mensajes: 122 Ubicación: Canada
|
 Publicado: Sáb Jul 04, 2009 6:20 pm Asunto: |
|
 Publicado: Sáb Jul 04, 2009 6:20 pm Asunto: |
|
|
shadows wrote:
| Rolf escribió: |
The aperture shown in the cam (1DsMkIII and all other Canons) is always f 1.4 at Av-Mode. May be the chip is damaged ? Many thanks for your assistance.
Rolf |
Well the aperture is programmed into the chip, the only way to change that is to change the settings on the chip itself. |
|
| Volver arriba |
|
 |
hk300
 Registrado: 30 Oct 2008 Mensajes: 1041 Ubicación: Hong Kong
|
 Publicado: Dom Jul 05, 2009 12:36 pm Asunto: |
|
 Publicado: Dom Jul 05, 2009 12:36 pm Asunto: |
|
|
hk300 wrote:
it is strange that the chip is programmed to show up as F1.4... most chips i know are programmed as F2.
My experience with these chips is that they work nicely with some lenses, whereas other lenses will be off.
I would expect that your AF chip is off, especially if this error occurs with more than 1 lens.
The chip itself is the same for all the xx to EOS body adapters. _________________ No longer member , please don't try to contact to him |
|
| Volver arriba |
|
 |
Rolf
 Registrado: 02 Mayo 2009 Mensajes: 4170 Ubicación: NRW/Germany
Expire: 2015-12-26
|
 Publicado: Dom Jul 05, 2009 4:49 pm Asunto: |
|
 Publicado: Dom Jul 05, 2009 4:49 pm Asunto: |
|
|
Rolf wrote:
| hk300 escribió: |
it is strange that the chip is programmed to show up as F1.4... most chips i know are programmed as F2.
My experience with these chips is that they work nicely with some lenses, whereas other lenses will be off.
I would expect that your AF chip is off, especially if this error occurs with more than 1 lens.
The chip itself is the same for all the xx to EOS body adapters. |
Hi Alex,
thanks for your comments. I have send a PM to you.
Rolf _________________ Rolf |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|