MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Gossen Sixtry: clean or not
Ver tema anterior :: Ver tema siguiente  


Reply

What do you think? Does the patina belong to the meter or do I try to clean it. The meter is working and I'm thinkin of using it.



Reply

If you can open it without damage, try a little test clean on an unseen area of the meter scale plate. If it cleans OK or not, this will determine your next course of action.

If you can't open it then you'll have to use it as is.


Reply

On the Sixtino, that plate is anodized aluminium - and anything that can corrode through the anodized layer is capable of eating through the sensor as well...


Reply

Sevo escribió:
On the Sixtino, that plate is anodized aluminium - and anything that can corrode through the anodized layer is capable of eating through the sensor as well...


Don't really understand?

A) You think that there could still be some substance in the meter that has caused this patina and eats away the sensor (maybe year 2035)?
b) Or that if I try to clean it then I could risk the sensor?

I have opened my Sixtomat umpteen times (and finally replace the stupid band first with a paper band - then with fixed paper scale Mad ). I think the plate comes off with two or four screws with no difficulties.


Reply

[quote="kansalliskala"]
Sevo escribió:

I think the plate comes off with two or four screws with no difficulties.


I would take the plate off and try to clean it with some water and soft soap, it looks like dust...

Good luck,

Jes.


Reply

Toothpaste was my first choice. Herbal flavour. Smile