MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Repair-shop in Görlitz
Ver tema anterior :: Ver tema siguiente  


Reply

Maybe many of you, especially in Germany, already know the 'Foto-Service Görlitz', run by an engineer named Peter Olbrich.
He once worked wonders on my Jupiter-9, which he completely disassembled, cleaned, washed out the old lubrication,lubricated it, revised distance and opening metering and readjusted it to work perfectly together with my Zorki 4. For all his I payed 51,62€ VAT included.
Since this lense had a problem with the metering, which almost wouldn't budge, so when going from infinity to closer distances, I always unscrewed it from the camera-body, he took it apart again and built in a second guide (in German 'Führung') for the axial movement, and now it works prefectly. He wrote me that actually this was an amount of work for which he would hve to charge me a lot of money, but then asked for a mere 15€ extra! So I'm convinced I can recommend him safely to this group. If you check 'Service' on his hompage, you can see that he is doing Zeiss and Meyer lenses too:

http://www.foto-service-goerlitz.de/13701.html


Reply

I called them and now two lenses are on their way to them. Let's see if they can fix them (one with stuck aperture blades, one with stuck fous).

Thanks a lot for that valuable tip!

Cheers,


Reply

Well, the lenses made it back after they had called me to discuss their planned work and to give me a cost estimate.

One was to relube, clean and adjust a slim Biotar 7.5 cm f1.5 which I bought a while ago in otherwise perfect - obviously never used - condition and it still looks like that now, which was my biggest concern!! They took it completely apart, washed the old sticky fat out, polishes the helicoid and relubed it. But not only that, they also took the optics block apart, cleaned the lenses and the very fine aperture blades, re-inserted the optics block then and also adjusted for correct infinity focus. For that whole "operation" they charged EUR50 plus 19% VAT (usually the cost of one hour labour work here - but it was certainly much more needed) plus shipping cost, EUR71 in total. Not cheap, but the lens moves like silk now (aperture + focus), looks still like new and they also replaced the missing front cap. It came back it its leather case, inside nicely wrapped in silk paper and outside packed thick in bubble wrap and foam as I had sent it. They must have used gloves, since the otherwise sensitive metal surface did not show any fingerprints at all!

The second lens they could not repair (or better did not want to because of fear of damaging it), a very rare and complicated lens with front ring dented and stuck aperture.

So with less then a week turn around I'm pretty happy (especially since I did not mention that I am allergic to smoke, but they must work in a smoke free environment since it does not stink at all.)

FAZIT: HIGHLY RECOMMENDED!!!


Reply

It is a truly wonderful thrill when you get a lens back that has been brought back from the dead Cool

Tell me Klaus, did you get that special fluttering feeling in your stomach when you unwrapped the package and discover the joy within? I love that feeling! Very Happy


Reply

GrahamNR17 escribió:
It is a truly wonderful thrill when you get a lens back that has been brought back from the dead Cool

Tell me Klaus, did you get that special fluttering feeling in your stomach when you unwrapped the package and discover the joy within? I love that feeling! Very Happy


Well, to be very honest, I'm surrounded with lenses and sending one for repair and getting it back is kinda happening weekely more or less, so yes it brings a smile on my face to get one of my well pampered babies back in better condition, but I would not call that "thrill", it is just TLC ("tender loving care" for the non-natives) I apply ... but that one was special, since I never seen any Biotar 7,5cm in THAT outstanding condition and now it is like from Zeiss Jena (actually Mr Olbrich worked there...).

Cheers,


Reply

Hi Klaus,

I'm glad it worked out so well.

Thomas


Reply

Thanks for the tip and the willingness to share that here!!

Btw. I made a mistake, Mr Olbrich worked for Meyer Optic in Görlitz and not Zeiss Jena.

Cheers,


Reply

I just found somebody else, who is very content with the services of Foto-Olbrich:

http://www.pentaconsix.com/repairers.htm

He also mentions the firm Ostkreuz in Berlin, with which I also had very good experience.