MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Help to save the lens!
Ver tema anterior :: Ver tema siguiente  


Reply

Hi all, what a nice situation, I have found a Praktica FX2 with mounted Meyer Primoplan 58 mm f1,9 in old shed, but the lens is in bad condition.

The lenses are scratch free, thanks god, but on the front element from inside there is small fog or fungus I don´t know. and a lot of dust particles inside elements. Other problem are oily aperture blades.

I can disassemble it (I will order the tool:-)), but the question is, how to clean efectively and safely the lenses and the blades and how to put together without touching the lenses, I can not imagine. any tricks? And what kind of grease or oil is used for greasing the fucising screw and aperture mechanism?

Thanks a lot to everybody.


Reply

use heat resistant grease and small amount as possible


Reply

Hi Milanos,

The fungus on the lens can be cleaned with a bit of cold cream (i use Avene brand, but you can use whatever brand you find in your country). If in doubt, browse to my blog Shooting with a Pentax K10D, then select the Repair link from the Categories menu on the right ... I just fixed a Biometar 80 and a Soligor 400 this way, and the results are spectacular ...

For the oily blades, if they open and close correctly, this shouldn't be an issue for preset/stop-down lenses, especially if you plan to use them on digital bodies. Nevertheless, if you plan to use them on your Praktica, use a q-tip with a few drops of Zippo fluid: once you removed the front group of the Primoplan, close the diaphragm and, GENTLY, use the q-tip to remove the oil from the blades ...

Hope this helps

Waiting to see samples taken with this lens (i have one and really like its color rendering) ...

Cheers


Reply

Ditto, oil on blades for a preset is not a problem, its even supposed to be there. The only problem is if the blades don't move.


Reply

Well thank You for Your comments. To be honest the blades moves very smoothly and all the same, I mean they make regular rounded hole, so should i leave it this way? I need to remove the bad thing on the front element, so If You claim I will be able to clean blades after removing the front lens, I can do it.

Thanks


Reply

Don't clean the blades if they work. Don't even touch the blades if you don't have to.