| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
yalcinaydin
 Registrado: 20 Mayo 2008 Mensajes: 825 Ubicación: Izmir, Turkey
|
 Publicado: Sáb Mayo 09, 2009 11:58 am Asunto: Haze on the road? |
|
 Publicado: Sáb Mayo 09, 2009 11:58 am Asunto: Haze on the road? |
|
|
yalcinaydin wrote:
I've bought a lens which was described as 'MINT'. When I received it wide open it produced foggy images. I haven't seen a haze before so I didn't know it was a haze then, I put it back to its own case and after 4 months of resting last week I learned that foggy images was a result of the 'Yellowish Haze' that present in the inner elements. Seller told me that he inspected it before sending and there wasn't haze. So there is only one explanation: lens got the haze on the road to me.
Can a lens get haze on shipment process? _________________ My name is "Yalcin", and exactly "Yalçın" and here you can find my MF samples:
http://www.flickr.com/photos/yalcinaydin/sets/
Right now switching back to AF because of work needs but I still love the MF lenses  |
|
| Volver arriba |
|
 |
PaulC
 Registrado: 23 Dic 2008 Mensajes: 2318
|
 Publicado: Sáb Mayo 09, 2009 12:51 pm Asunto: |
|
 Publicado: Sáb Mayo 09, 2009 12:51 pm Asunto: |
|
|
PaulC wrote:
I don't know. Obviously, I think it is unlikely but maybe if it was left somewhere in adverse conditions during shipment the canada balsam holding lens elements together might discolour. Maybe. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Volver arriba |
|
 |
yalcinaydin
 Registrado: 20 Mayo 2008 Mensajes: 825 Ubicación: Izmir, Turkey
|
 Publicado: Sáb Mayo 09, 2009 1:43 pm Asunto: |
|
 Publicado: Sáb Mayo 09, 2009 1:43 pm Asunto: |
|
|
yalcinaydin wrote:
For the record, shipment was made on late December so winter time. Maybe this can change somethings. _________________ My name is "Yalcin", and exactly "Yalçın" and here you can find my MF samples:
http://www.flickr.com/photos/yalcinaydin/sets/
Right now switching back to AF because of work needs but I still love the MF lenses  |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Sáb Mayo 09, 2009 4:48 pm Asunto: |
|
 Publicado: Sáb Mayo 09, 2009 4:48 pm Asunto: |
|
|
Attila wrote:
In my experience if liquid goes inside , it not dry without trace, but not makes haze. Haze was inside before you get from seller I am sure. Perhaps seller didn't see it if not so clearly visible or seller didn't say truth. Sorry mate about your disappointment . |
|
| Volver arriba |
|
 |
yalcinaydin
 Registrado: 20 Mayo 2008 Mensajes: 825 Ubicación: Izmir, Turkey
|
 Publicado: Sáb Mayo 09, 2009 5:49 pm Asunto: |
|
 Publicado: Sáb Mayo 09, 2009 5:49 pm Asunto: |
|
|
yalcinaydin wrote:
| Attila escribió: |
| In my experience if liquid goes inside , it not dry without trace, but not makes haze. Haze was inside before you get from seller I am sure. Perhaps seller didn't see it if not so clearly visible or seller didn't say truth. Sorry mate about your disappointment . |
Atilla, seller said that he checked with led light and there wasn't haze in the glass. This is a risk we all get by buying a lens without seeing it. This time not a good experience for me  _________________ My name is "Yalcin", and exactly "Yalçın" and here you can find my MF samples:
http://www.flickr.com/photos/yalcinaydin/sets/
Right now switching back to AF because of work needs but I still love the MF lenses  |
|
| Volver arriba |
|
 |
bob955i
 Registrado: 15 Abr 2007 Mensajes: 2495
|
 Publicado: Sáb Mayo 09, 2009 6:11 pm Asunto: |
|
 Publicado: Sáb Mayo 09, 2009 6:11 pm Asunto: |
|
|
bob955i wrote:
@ Yalcin:
While you probably shouldn't have to, you can clean the lens yourself.
If you have decent lens spanners, you can have it done in about twenty minutes tops.
Remove the front cell as one piece and check it for haze before removing the rear cell as the front one is the easiest to remove. While the front one's out, check the rear cell in situ.
Mine had haze on the elements either side of the doublet but yours might be different.
It really is easy. |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Sáb Mayo 09, 2009 6:56 pm Asunto: |
|
 Publicado: Sáb Mayo 09, 2009 6:56 pm Asunto: |
|
|
Attila wrote:
| yalcinaydin escribió: |
| Attila escribió: |
| In my experience if liquid goes inside , it not dry without trace, but not makes haze. Haze was inside before you get from seller I am sure. Perhaps seller didn't see it if not so clearly visible or seller didn't say truth. Sorry mate about your disappointment . |
Atilla, seller said that he checked with led light and there wasn't haze in the glass. This is a risk we all get by buying a lens without seeing it. This time not a good experience for me  |
He is not say truth, haze is not come under a month it's come under years expect summer time when oil goes to lens if stored in hot environment. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|