MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

OM1 faulty meter
Ver tema anterior :: Ver tema siguiente  


Reply

I picked up an unloved OM1 from a charity shop yesterday. It works fine, apart from the meter. I mean it's a bit of a mess, I can see what looks like glue, perhaps on the prism (don't think it's decayed seals, as it looks transparent).

Anyway, I'd like to get the meter working, but I have no skills (yet). The current symptoms are that the meter appears dead, but then periodically it "spasms" and flicks up and down. Occasionally it settles and actually gives a reading, but that never lasts long. I've spent some time clicking through the shutter speeds, and turning the ISO knob in the vain hope that this might help. I've looked in the battery compartment, and there's no evidence of a problem.

So I guess I'm going to have to take the camera apart? I'm a complete novice at this. Can anyone suggest where/how I should start?

Thanks,


Reply

Hi,
A good starting point could be the service manual: http://olympus.dementia.org/Hardware/.
Since you're stating you are a complete novice I'd suggest you to read the Tomosy's "Camera Maintenance & Repair" vol. 1 and 2 before doing anything. These should give you the right approach in camera troubleshooting and disassembling technique. In vol.1 you'll find a whole paragraph about the OM-1.
Hope this helps.
Marty.