MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

I Modified A Fujifilm S1 PRO to accept M42 Lenses
Ver tema anterior :: Ver tema siguiente  


Reply

http://f22plus.wordpress.com/2009/04/14/m42-lens-on-nikon-f-mount-modification-on-fujifilm-s1-pro/

I modified my Fujifilm S1 PRO to accept M42 lenses. It allows infinity focus without optics.
Very Happy
The modification works, however, I was a tad impatient and cracked the cover over the sensor while mounting the adapter.
Sad
See my blog entry describing the whole story if you are interested.


Reply

I am sorry for your Fuji, bad news
keep walking!


Reply

You are brave. Thanks for the sharing.


Reply

Holy shit, I bet the air went blue Sad


Reply

Blue with red flares from the highlights.


Smile


Reply

As a little piece of trivia for those who have not had the opportunity to open up an S1 without regard as to putting it back together -

The inside still retained the toothed film rollers, the ASA sensors for the film canister and the entire area for the can to fit including the spring loaded bottom support, the film take-up area, and the raised silver film bearing surfaces. The sensor array was simply held in place with double sided sticky foam tape.

Also there are many, many little tiny electronic thingies (sorry for using technical terms) connected by by those cute plastic films with lines on them - all tucked neatly in place.

Next time I will be more careful. Gotta go see what S1's are on eBay ..........................


Reply

greg escribió:
Next time I will be more careful. Gotta go see what S1's are on eBay ..........................


About €120 to €150,- here in Germany.


Reply

greg escribió:
As a little piece of trivia for those who have not had the opportunity to open up an S1 without regard as to putting it back together -

The inside still retained the toothed film rollers, the ASA sensors for the film canister and the entire area for the can to fit including the spring loaded bottom support, the film take-up area, and the raised silver film bearing surfaces. The sensor array was simply held in place with double sided sticky foam tape.

Also there are many, many little tiny electronic thingies (sorry for using technical terms) connected by by those cute plastic films with lines on them - all tucked neatly in place.

Next time I will be more careful. Gotta go see what S1's are on eBay ..........................


Wow! I can understand them using the same mouldings as used for a similar film camera, but to actually fit stuff that will never be utilised seems downright weird!

Any idea what camera was the S1 based on?


Reply

GrahamNR17 escribió:

Wow! I can understand them using the same mouldings as used for a similar film camera, but to actually fit stuff that will never be utilised seems downright weird!


Which implies that Fuji were not starting from a pile of parts, but from complete cameras. They did the minimal stripdown needed to convert to digital. (Same as Kodak with their film to digital conversions).


Editado por última vez por ChrisLilley el Mié Abr 15, 2009 1:49 am; editado 1 vez en total


Reply

It was built on the Nikon N60 film-camera body.


Reply

Oops. Shocked Crying or Very sad


Reply

How?

Bummer Sad

Doug.

greg escribió:
http://f22plus.wordpress.com/2009/04/14/m42-lens-on-nikon-f-mount-modification-on-fujifilm-s1-pro/

I modified my Fujifilm S1 PRO to accept M42 lenses. It allows infinity focus without optics.
Very Happy
The modification works, however, I was a tad impatient and cracked the cover over the sensor while mounting the adapter.
Sad
See my blog entry describing the whole story if you are interested.


Reply

Doug,

The link I provided is to my blog space where I put the how (or how not) to information with a few pics.

Greg


http://f22plus.wordpress.com/2009/04/14/m42-lens-on-nikon-f-mount-modification-on-fujifilm-s1-pro/


Reply

Ta!

Doug

greg escribió:
Doug,

The link I provided is to my blog space where I put the how (or how not) to information with a few pics.

Greg


http://f22plus.wordpress.com/2009/04/14/m42-lens-on-nikon-f-mount-modification-on-fujifilm-s1-pro/